Quick Start Guide LabelWriter ® 450 & 450 Turbo
Copyright © 2010 Sanford, L.P. All rights reserved. Revised 12/10. No part of this document or the software may be reproduced or transmitted in any form or by any means, or translated into another language without the prior written consent of Sanford, L.P. Trademarks DYMO, LabelWriter, and DYMO Label are registered marks in the United States and other countries. All other trademarks are the property of their respective holders.
Quick Start Guide For complete information about your label printer, you can view the LabelWriter Printer User Guide from the DYMO Label v.8 Help menu or from the DYMO Web site at www.dymo.com. Follow these steps to install the LabelWriter printer and print your first label. 1. Unpacking your LabelWriter Printer NOTE Do not connect the printer into your computer until after the software installation is complete. 1 Unpack your printer and save the packing materials.
Become familiar with the printer’s major components. See Figure 2. Top cover Label roll Label spool USB connector Label guide Label eject button S/N 00000-0000000 Label release DC power connector Form-feed button and LED Label feed path and tear bar Serial number Cable channel Figure 2 LabelWriter Printer Features Your LabelWriter printer is a direct thermal printer and does not use ink or toner. Instead, the printer uses heat from a thermal print head to print on specially treated labels.
2. Installing the Software Do not connect the printer to your computer until after the software installation is complete. Windows Depending on your system configuration, the software installation could take some time while the required Microsoft .NET™ software is installed. To install the software on a Windows system 1 Close all open Microsoft Office applications. 2 Insert the DYMO LabelWriter CD into your CD-ROM/DVD drive. After a few seconds, the installation screen appears.
3. Connecting your LabelWriter Printer NOTE Do not connect the printer to your computer until after the software installation is complete. Power adapter To connect the power 1 Plug the power cord into the power adapter. See Figure 3. 2 Plug the power adapter into the power connector on the bottom of Power cord Figure 3 the printer. See Figure 4. 3 Plug the other end of the power cord into a power outlet. 4 Plug the USB cable into the USB port on the bottom of the printer.
4. Loading Labels Important! In order for the labels to feed properly during printing, pay attention to the following when loading labels on the spool and into the printer: • The label spool guide must be pushed flush against the label roll, with no gap. See Figure 6. • The labels must be loaded with the left edge of the label inserted against the left edge of the label feed slot. See Figure 8. To load a label roll 1 Press the form-feed button to eject the labels that protected the printer during shipment.
5 Slide the spool guide onto the right side of the spool and press the guide tightly against the side of the label roll, leaving no gap between the roll and the spool. See Figure 6. NOTE To ensure proper feeding of labels during printing, the label roll must fit snugly against both sides of the label spool, with no gaps. Figure 6 6 Insert the label spool into the slot in the printer cover with the labels extending from underneath the roll. See Figure 7.
5. Printing your First Label The first time you open the application, you are asked to register the software. Registering the software ensures that you will be informed of any software updates. During the registration process, you will be asked to enter the serial number for your label printer. The serial number is located on the bottom of the printer. To print your first label 1 Start DYMO Label software by doing one of the following: • For Windows, click Start, then Programs>DYMO>DYMO Label v.8.
Figure 9 highlights some of the major features available in DYMO Label software. Visually choose your label type and apply layouts. Print postage using DYMO Stamps software. Insert text, addresses, images, shapes, lines, barcodes, dates, and counters. Verify and correct addresses on your label Store your favorite addresses in the Address Book or view your Outlook or Mac Address Book contacts; automatically insert addresses on your label. Select a printer to print your labels.
For LabelWriter 450 Turbo Printers Only Printing Postage with DYMO Stamps You can now print postage right from your desktop using your LabelWriter 450 Turbo label printer. All you need is DYMO Stamps software, your LabelWriter printer, DYMO Stamps labels, and an Internet connection. To install DYMO Stamps and print postage 1 Sign up for your USPS account with Endicia. Go to: www.endicia.com/dymostamps 2 At the end of the sign up process, download and install the DYMO Stamps software.
3 Enter your account number and pass phrase, and then click OK. 4 Click Buy Postage and purchase postage for your account. 5 Select DYMO LabelWriter 450 Turbo from the Printer list under Printer Selection. 6 Click Test Print to print a voided postage label. You are now ready to start printing actual postage whenever you need it. Refer to the DYMO Stamps online Help for more information about using the software.
Distributed by: DYMO, Atlanta, GA 30328 800-426-7827: www.dymo.com © 2010 Sanford, L.P.
