LT Momentum AUS.indd 1 LetraTag ® LT-100T User Guide www.dymo.
LetraTag User Guide ≠ Æ ß ∞ ± ≤ ≥ ¥ µ ∂ Label Exit Memory Save Memory Recall Print LCD Display Power Connector Power Cutter Insert Format ∑ ∏ π ∫ ª º Ω æ ø Settings Clear Space Bar OK Navigation Cancel Num Lock CAPS Back Space ≠ Æ ß ∞ ± ≥ ¥ µ ∂ ∑ ≤ Cancel Clear ∏ ∫ ª º Ω æ ø π LT Momentum AUS.
About Your New Labelmaker ° With your new DYMO LetraTag® labelmaker, you can create a wide variety of high-quality, self-adhesive labels. You can choose to print your labels in many different font sizes and styles. The labelmaker uses DYMO LetraTag (LT) 12 mm label cassettes. LT cassettes are available in multiple colors of plastic and metallic tape, and in white iron-on tape. Visit www.dymo.com for information on obtaining labels and accessories for your labelmaker.
Inserting the Batteries The labelmaker uses four high-capacity AA alkaline batteries. To insert the batteries 1. Remove the battery compartment cover. See Figure 2. 2. Insert the batteries following the polarity markings (+ and –). 3. Replace the cover. Ç Remove the batteries if the labelmaker will not be used for a long period of time. Figure 2 Connecting the Optional Power Adapter An optional 9 Volt,1.5 A power adapter can also be used to power the labelmaker.
Ç Make sure the labelmaker power is turned off before you disconnect the power adapter from the main power source. Otherwise, your most recent memory settings will be lost. Inserting the Label Cassette Your labelmaker comes with one label cassette. Visit www.dymo. com for information about purchasing additional label cassettes. Figure 3 To insert the label cassette 1. Lift the label cassette cover to open the label compartment. See Figure 3.
Selecting a Language The first time you turn on the power, you are asked to select your desired language. By default, the language is set to English. The language option you choose determines the character set that is available. To select a language 1. Press ä. 2. Use the up or down arrow key to select Language and press ã. 3. Use the up or down arrow key to select the language you want and press ã.
4. When finished, press ã. The default time is displayed. 5. Use the left or right arrow key to move the cursor over each setting (hours and minutes) and use the up or down arrow keys to increase or decrease the value. 6. When finished, press ã. Printing Your First Label You are now ready to print your first label. To print a label 1. Enter text to create a simple label. 2. Press å. 3. Press the cutter button to cut the label. Congratulations! You printed your first label.
Getting to Know the Labelmaker Become familiar with the location of the feature and function keys on your labelmaker. Refer to Figure 1 on the inside front cover. The following sections describe each feature in detail. Power The â button turns the power on and off. After two minutes of no activity, the power is switched off automatically. The last label created is remembered and displayed when the power is turned back on. The previously selected style settings are also restored.
CAPS Mode The [ key toggles capitalization on or off. When CAPS mode is turned on, the CAPS mode indicator is shown on the display and all letters that you enter will be capitalized. The default setting is CAPS mode on. When CAPS mode is off, all letters appear in lower case. Num Lock The ñ key provides access to the numbers located on some of the alphabetic keys.
Cancel The ú key allows you to exit from a menu without making a selection or to cancel an action. Format The ô key displays the Size, Style, and Borders submenus. These formatting features are described later in this User Guide. Insert The ò key allows you to insert symbols, a second line, or the date on your label. Settings The ä key displays the Preview, Language, Set Date, and Set Contrast submenus. These features are described later in this User Guide.
To set the font size 1. Press the ô key. . Use the up or down arrow keys to select Size and press ã. . Use the up or down arrow keys to select the desired font size and then press ã. Adding Font Styles You can choose from six different font styles: AaAbCc Normal AaAbCc Bold AaAbCc Italic Outline Shadow Ä Vertical When you select a style, that style applies to all characters. Styles can be used with alphanumeric characters and some symbols. To set the font style 1. Press ô. .
Creating Two-Line Labels You can print a maximum of two lines on labels. To create a two-line label 1. Type the text for the first line and press ò. 2. Use the arrow keys to select Second Line and press ã. A multiline symbol is inserted at the end of the first line, but will not print on the label. 3. Type the text for the second line. Adding the Date You can insert the date on your label. The date format is MMM DD, YY (US) or DD MMM YY (Europe) depending upon the version of your labelmaker.
Adding Box and Underline Styles You can highlight your text by choosing a box or underline style. Â Á Underline Square Ò Train È Pointed Û Î Rounded Ù Flowers Ô Crocodile Ì Edged Sweet Hearts A label can be underlined or enclosed in a box, but not both together. To add an underline or box style 1. Press ô. 2. Select Borders, and press ã. 3. Select underline or a box style and press ã. On two-line labels, both lines are underlined. In box style mode, all the lines are enclosed in one box style.
Using Symbols and Special Characters Symbols and other special characters can be added to your labels. Adding Symbols The labelmaker supports the extended symbol set shown below. 14 LT Momentum AUS.
To insert a symbol 1. Press ò, select Symbols, and press ã. The first row of symbols shown in the table appears in the display. 2. Use the arrow keys to move to the desired symbol. The left and right arrows move horizontally along a row of symbols. The up and down arrow keys scroll vertically through the rows of symbols. 3. When you locate the symbol, press ã to add the symbol to your label. The labelmaker remembers the last symbol used.
Printing Options You can preview your label and adjust the printing contrast. Previewing Your Label You can preview the text or format of your label prior to printing. A two-line label is previewed as a single-line label with a line break character between the two lines. To preview your label 1. Press ä. 2. Select Preview and press ã. The text of the label scrolls across the display. Adjusting the Print Contrast You can adjust the print contrast to fine tune the print quality of your label.
Using Labelmaker Memory The labelmaker has a powerful memory feature that allows you to store the text of up to nine labels you use frequently. Storing Label Text You can store up to nine specific labels you use frequently. To store the current label text 1. Press ö. The first of the memory fields is displayed. 2. Use the arrow keys to move through the fields. You can store new text in any of the memory locations. 3. Select a memory location and press ã.
Caring for Your Labelmaker Your labelmaker is designed to give you long and trouble-free service, while requiring very little maintenance. Clean your labelmaker from time to time to keep it working properly. Clean the cutter blade each time you replace the label cassette. To clean the cutter blade Press in and hold 1. Dampen a cotton ball with alcohol. 2. Remove the label cassette. 3. Place the tip of a ball-point pen or pencil on the black post as shown in Figure 6, and press the post down.
To clean the print head 1. Remove the label cassette. 2. Remove the cleaning tool from inside the label compartment cover. 3. Gently wipe the padded side of the tool across the print head. See Figure 6. LT Momentum AUS.
Troubleshooting Review the following possible solutions if you encounter a problem while using your labelmaker. Problem/Error Message No display Poor Print Quality Poor Cutter Performance Printing Solution • Ensure the labelmaker is turned on. • Replace discharged batteries. • Replace batteries or attach power adapter. • Ensure label cassette is installed properly. • Clean the print head. • Replace the label cassette. Clean the cutter blade. See Caring for Your Labelmaker. No action required.
Documentation Feedback We are constantly working to produce the highest quality documentation for our products. We welcome your feedback. Send us your comments or suggestions about our user guides.
Environmental information The equipment that you bought has required the extraction and use of natural resources for its production. It may content hazardous substances for the health and the environment. In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems. Those systems will reuse or recycle most of the materials of your end life equipment in a sound way.
This product is CE marked in accordance with the EMC directive and the low voltage directive and is designed to conform with the following international standards: US FCC Class B Compatibility Safety - EN 60950, IEC 950, UL 1950 EMC Compatibility EN 61000 3-2/3; EN 61000 4-2/3/4/5/6/8/11; ENV 50204; EU Immunity - EN 55024 & addendum A1, A2 Electromagnetic Compatibility (EMC) Information Technology equipment, Immunity Characteristics Emissions – EN 61000-6-3: Electromagnetic Compatibility (EMC) - Part 6: Gen
Contacting Customer Support The following table provides a list of telephone numbers to reach DYMO Sales and Support departments. You can also reach DYMO at www.dymo.com. Australia Tel.: 1800 633 868 Fax: 1800 817 558 Finland Tel.: 09 229 07 04 Fax: +31 20 581 93 80 Austria Tel.: 01 599 14 20 12 Fax: +31 20 581 93 80 France Tel.: 01 69 32 49 32 Fax: +31 20 581 93 80 Belgium Tel.: 02 713 38 08 Fax: +31 20 581 93 80 Germany Tel.: 069 66 56 85 29 Fax: +31 20 581 93 80 Česká republika Tel.
Italy Tel.: 02 45 28 13 08 Fax: +31 20 581 93 80 Portugal Tel.: 21 120 61 64 Fax: +31 20 581 93 80 The Netherlands Tel.: 020 581 93 86 Fax: +31 20 581 93 80 Sweden Tel.: 08 632 00 57 Fax: +31 20 581 93 80 New Zealand Tel.: 0800 848 111 Fax: 0800 737 212 Switzerland Tel.: 044 342 04 66 Fax: +31 20 581 93 80 Norway Tel.: 22 97 17 10 Fax: +31 20 581 93 80 Turkey Tel.: 0 212 286 26 30 Fax: 212 286 26 28 United Kingdom Tel.: 020 7341 55 29 Fax: +31 20 581 93 80 Poland Tel.
©2007 DYMO A Newell Rubbermaid company 931035 DYMO bvba Industriepark-Noord 30 9100 Sint-Niklaas Belgium www.dymo.com 26 LT Momentum AUS.
