User Guide www.dymo.
Tape Exit AC Power Connector LCD Display Cutter Lever Power Button Navigation Key Print Button Hot Keys Thumb Latch for Tape Compartment Backspace/Clear All Escape/Backlight Symbol Keys Function/Shift Function Keys Enter/OK Numeric Keys Alpha Keys Space Bar/ Symbol Key Thumb Latch for Battery Compartment Figure 1 RhinoPRO 5000 Printer 2
About Your New Printer With your new DYMO RhinoPRO™ 5000 printer, you can create a wide variety of high-quality, selfadhesive labels. You can choose to print your labels in many different sizes and styles. The printer uses RhinoPRO Industrial label cassettes in widths of 1/4” (6 mm), 3/8” (9 mm), 1/2” (12 mm), or 3/4” (19 mm). RhinoPRO label cassettes are also available in a wide range of materials. Visit www.dymo.com/industrial for information on obtaining tapes and accessories for your printer.
To insert the tape cassette 1. Press the thumb catch on the right side of the printer to open the tape cassette door. The first time you use the printer, remove the protective cardboard insert from between the print head and pinch roller. See Figure 4. Push down gently Print Head Pinch Roller Remove cardboard insert Figure 5 Tighten tape Selecting a Language = 6 mm = 9/12 mm = 19 mm Set cassette switch Figure 4 2. Set the cassette switch for the size of the tape cassette that you are inserting.
3. Cut the label using your thumb to lift the cutting lever and pull it towards the back of the printer. See Figure 6. SIZE: XL WRAP FIXED PPANEL TBLOCK BATTERY LINE CAPS BCODE VERT Figure 7 Backlighting When the printer is used in a low-light environment, the display may become difficult to read. The backlighting feature will light the display. ➤ Press + ESC to turn backlighting on and off. CAPS Mode Figure 6 4. Remove the label. Congratulations! You have printed your first label.
Navigation Key Adding Symbols You can review and edit your label using the and arrows on the Navigation key. You can also view menu choices using and , and then press to make a selection. The printer supports the extended symbol set as shown in Figure 9. Designing Your Label You can choose from a number of formatting options to enhance the appearance of your labels. Changing the Font Size You can print the text on your label in five font sizes: extra-small, small, medium, large, and extralarge.
Once a label is saved to memory, you can recall the label to print or edit. To recall a label from memory 1. Press RECALL . The memory locations are displayed. 2. Use the arrow keys to move to the memory location that contains the label you want and press . Deleting a Label from Memory When you no longer need a stored label, you can delete it from memory. To delete a label from memory 1. Press RECALL . The memory locations are displayed. 2.
123 123 123 123 123 123 123 123 Figure 15 Normally, the length of the label is determined by the length of the text entered. However, you may wish to make a label for a specific purpose that is a fixed length regardless of the length of the text. You can specify a fixed length for a label in 0.250” (6 mm) increments between 0.500” (20 mm) and 40.000” (999.9 mm). The preset fixed length is 1.5” (25 mm). Any change you make to the fixed length setting remains in effect until you change it.
Printing Vertical Labels VERT Single-line labels can be printed with the text running vertically. To print vertically 1. Enter the text for your label. 2. Press VERT and then Print . Printing Barcode Labels + VERT . The printer can generate two types of barcodes: CODE-39 and CODE-128. You can only print a barcode on 3/4” (19 mm) label tape. The barcode will print horizontally along the label with the text in small print underneath the barcode. You can optionally add text before and after the barcode.
To serialize your labels 1. Enter the text for your label. 2. Use the arrow keys to move the cursor under the letter or number to serialize. 3. Press SERIAL . 4. Enter the number of labels you wish to print and press or Print to begin printing. Enter 1-99 for numbers and 1-26 for letters. To print multiple copies of the same serialized label, choose + Print and enter the number of copies of each label to print. See Printing Multiple Copies on page 9.
Troubleshooting Review the following possible solutions if you encounter a problem while using your printer. Problem/Error Message Solution No display • Ensure the printer is turned on. • Replace discharged batteries. Poor Print Quality • • • • Poor Cutter Performance Clean the cutter blade. See Cleaning Your Printer. !!!!!!!!!!!!! printer is jammed. Replace discharged batteries. Ensure tape cassette is installed properly. Clean the print head. Replace the tape cassette.
This product is CE marked in accordance with the EMC directive and the low voltage directive and is designed to conform with the following international standards: US FCC Class B Compatibility Safety - EN 60950, IEC 950, UL 1950 EMC Compatibility EN 61000 3-2/3 ; EN 61000 4-2/3/4/5/6/8/11; ENV 50204; EU Immunity - EN 55024 & addendums A1, A2 Electromagnetic Compatibility (EMC) - Information Technology equipment, Immunity Characteristics Emissions – EN 61000-6-3: Electromagnetic Compatibility (EMC) - Part 6:
