Instructions / Assembly

Dual Fuel Grill

ASSEMBLY INSTRUCTIONS

Step 20: Unscrew the igniter cap and insert the AAA battery (29) into

the igniter body with positive ‘+’ end facing out. Replace the

igniter cap.

Step 21: Insert the grease pan (22) into position by sliding it in the gas

grill body from the rear (as illustrated) along the rails located

just below the underside of grill body.

NOTE: Grease pan MUST be in position as illustrated below

(grease cup support rails on your left while facing the rear of

the grill).

Insert grease cup (20) into position by sliding it onto the support rails on

the bottom side of grease pan.