Instructions / Assembly

Hardware Used

A M6x12 Screw Qty: 16 pcs

B M6 Plain Washer Qty: 16 pcs

C M6 Spring Washer Qty: 16 pcs

Step 1: Install the casters, including 2 direction casters (2), 1 non-locking

swivel caster (3), and 1 locking swivel caster (4), onto bottom

shelf (1) using M6x12 screws (A), M6 spring washers (C,) and

M6 plain washers (B) as illustrated.

Step 2: Insert 4 screws (A) into holes in bottom shelf (1), leaving

4-6mm clearance from screw head to bottom shelf (1). Attached

cart left side panel (13) by placing the panel keyholes over the

screw heads (A) on the left side of bottom shelf (1), slide the

cart left side panel (13) so that the screw head is over the

smaller part of keyhole. Thread the screw (A) down snug but do

not tighten completely at this step. Repeat with cart right side

panel (5).

Hardware Used

A M6x12 Screw Qty: 4 pcs

ASSEMBLY INSTRUCTIONS

NOTE: Use caution when assembling and operating this unit to avoid cuts and scrapes from edges.

Dual Fuel Grill