Use and Care Manual

ASSEMBLY INSTRUCTIONS

Hardware Used

A M6x12 Screw Qty: 4 pcs

(Pre-assembled in cabinet door handles)

Step 11: Remove preassembled two M6x12 screws (A) and door

handle sleeve (18) from the door handle. Insert the 2 door

sleeves (18) into the holes located on the back of left door

assembly (15), insert two M6x12 screws (A) into the door

handle sleeve (18), through the door handle bezels (17) and

into the thread holes in the door handles. Tighten the

screws. Repeat with right door assembly (14).

Step 12: Insert the bottom hinge pin of left door assembly (15) into

the hole (labeled as AA) on bottom shelf (1). Press the

hinge pin on the top of left door assembly (15) by hand

and insert into the hole (labeled as BB) of upper front

brace (11). Repeat the same with right door assembly (14).

Hinge pin on the

top of the door

Dual Fuel Grill