Full Product Manual

11
ASSEMBLY INSTRUCTIONS
9. Assemble the grill body assembly (D) onto the
cart assembly with four M6x16 bolts (DD).
9
10. Pre-assemble two M6x16 bolts (DD) onto the
grill body assembly (D) and do not tighten them.
Make sure to leave a 5mm gap between the
bolt and grill body’s end cap. Then hang the
left side table assembly (K) on the bolts and
fasten the left side table assembly (K) with
three M6x16 bolts (DD) and tighten all bolts.
10
Hardware Used
DD
M6x16 Bolt
x 4
DD
DD
K
D
Hardware Used
DD
M6x16 Bolt
x 5
D
5mm