Instructions / Assembly

7
ASSEMBLY INSTRUCTIONS
1. Put two leg end caps (M) under left leg
assembly (L), and fasten them with two
ST4.8X10 screws (AA).
Hardware Used
ST4.8x10 Screw
x 2
2. Slide the axle (T) through the right leg
assembly (S) and then put the wheels (U) on
both sides. Tighten the wheels with M10
nuts (BB) with M10-M6 wrenches (CC). Please
note, this step requires two people to
complete, and if necessary any other plier or
adjustable wrench can be used for assembly.
Hardware Used
BB
M10 Nut
x 2
2
AA
1
S
T
U
M
L
BB
CC
M10-M6 Wrench
x 2
AA