DUAL CHAMBER CHARCOAL GRILL MODEL #DGN576SNC/ #DGN576SNC-D Français p. 20 Español p. 39 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-447-4768, 8:00 a.m. – 4:30 p.m. CST, Monday – Friday, or email customerservice@ghpgroupinc.com. 70-10-022 Rev.
TABLE OF CONTENTS Safety Information................................................................................................................ 2 Package Contents................................................................................................................ 4 Hardware Contents.............................................................................................................. 5 Preparation.........................................................................................
SAFETY INFORMATION • Use caution when lifting and moving the unit to avoid back strain or back injury. Do not move the unit while it is in use. •D O NOT operate the unit near or under flammable or combustible materials such as decks, porches or carports. A minimum clearance of 36 in. (91.4 cm) is recommended. DO NOT operate the unit under overhead construction. • A minimum clearance to combustible construction is 36 in. (91.4 cm) from sides and back. • DO NOT use this appliance as a heater.
PACKAGE CONTENTS D C A Z A1 W B U E Y T F X H S V I J K R G P Q M L PART A B C D E F G H I J K L M N DESCRIPTION Side Shelf Lid and Firebox Assembly Lid Handle Assembly Smoke Stack Assembly Charcoal Access Door-Left Crank Handle Damper Handle-Right Damper Side Shelf Support-Right Rear/Left Front Ash Tray Ash Tray Handle Cart Brace Right Leg Assembly Caster O N QUANTITY PART 2 1 1 1 1 2 1 2 2 O P Q R S T U V W X Y Z A1 1 1 2 1 2 4 DESCRIPTION Storage Basket Axle Wheel Left Le
HARDWARE CONTENTS (shown actual size) PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 50 minutes with two people Tools Required for Assembly (not included): Phillips screwdriver, adjustable wrench.
AA CC Wrench (not to scale) Hardware Used M6x12 Bolt CC BB DD DD CC EE EE DD Wheel axle sleeve GG EE HH 1. I nsert axle (P) into left leg assembly (R). Attach one wheel (Q) to each side of axle (P) using one wheel axle sleeve (GG), one M8 washer (DD), and one M8 nut (EE). x2 2. A ttach two casters (N) to right leg assembly (M) and secure with wrench (KK). 3. A ttach two cart braces (L) to left leg assembly (R) using two M6x12 bolts (AA) on each side. Cotter Pin M5 Shoulder M5 Shoulder Qty.
AA M6x12 Bolt AA Hardware Used x4 Wheel Axle Sleeve Qty. 2 GG FF 4. A ttach two cart braces (L) to right leg assembly (M) using two M6x12 bolts (AA) on each side. 4 Cotter Pin Qty. 7 M6x20 Bolt Qty. 14 M6x12 Bolt Qty. 27 BB ASSEMBLY INSTRUCTIONS 1 L M 1 AA 5 5. Attach storage basket (O) to cart braces (L). 2 O NOTE: Make sure four hooks on storage basket (O) are fully inserted into holes on cart braces (L). L 6.
Cotter Pin M5 Shoulder Bolt Hardware Used JJ CC M6 Lock Nut Qty. 3 HH x8 x4 8 9 H Wrench Qty. 1 Wheel Axle Sleeve KK Qty. 2 Wrench Qty. 1 R 2 M5 Lock Nut Qty. 8 M6x30 Bolt Qty. 2 Cotter Pin Qty. 7 LL HH M5 Shoulder Bolt Qty. 8 CC Hinge Bolt Qty. 2 7 II JJ Hinge Bolt Qty. 2 JJ M6 Lock Nut Qty. 3 CC Wheel Axle Sleeve Qty. 2 B 1 M5 Lock II Nut Qty. 8 8 Cotter Pin Qty. 7 x8 KK GG M6x20 Bolt Qty. 14 BB x6 Hinge Bolt HH Qty. 2 Wrench Qty. M6x12 1 Bolt Qty.
Wheel Axle Sleeve Qty. 2 M5 Lock Nut Qty. 8 M6 Lock Nut Qty. 3 FF Hinge Bolt Qty. 2 HH BB Wheel Axle Sleeve Qty. 2 M6x20 Bolt Qty. 14 6x12 Bolt Qty. 27 9 HH A B otter Pin Qty. 7 BB AA x8 E JJ M6x30 Bolt Qty. 2 B Wrench Qty. 1 KK 11 GG M6 Lock Nut Qty. 3 A 12 FF M5 Shoulder Bolt Qty. 8 Cotter Pin Qty. 7 CC FF M6x20 Bolt W x4 NOTE: First secure two upper M6x20 bolts (BB), then lower M6x20 bolts (BB). BB I x4 12.
K KK J Wrench Qty. 1 AA Cotter Pin Qty. 7 x2 FF M6x12 Bolt M6x12 Bolt Qty. 27 AA AA Hardware Used 13 10 1 13. Attach ash tray handle (K) to ash tray (J) using two M6x12 bolts (AA). Wheel Axle Sleeve Qty. 2 GG M6x20 Bolt Qty. 14 BB ASSEMBLY INSTRUCTIONS Hinge Bolt Qty. 2 M5 Lock Nut Qty. 8 M6x30 Bolt Qty. 2 JJ B Wheel Axle Sleeve Qty. 2 II HH 15 B 10 Cotter Pin Qty. 7 x3 FF D M6x12 Bolt Qty.
M6x30 B Qty. 2 Cotter Pin Qty. 7 AA 18 B x2 F 11 M5 Lock Nut Qty. 8 Hinge Bolt Qty. 2 Wheel Axle Sleeve Qty. 2 GG Hinge Bolt Qty. 2 Wheel Axle Sleeve Qty. 2 FF M5 Lock Nut Qty. 8 C Cotter Pin Qty. 7 Cotter Pin FF M6x12 Bolt Qty. 27 FF KK HH Wrench Qty. 1 M6x20 Bolt M6x30 Qty. 14 Bolt Qty. 2 M6x12 JJ Bolt Qty. 27 AA II HH GG M6 Lock Nut Qty. 3 M8 Washer Qty. 2 18. Thread crank handle (F) into lid and firebox assembly (B). Secure with one cotter pin (FF).
AA M6x12 Bolt Hi x8 Wheel Axle Sleeve Qty. 2 AA Cotter Pin Qty. 7 Hardware Used 19 FF M6x20 Bolt Qty. 14 M6x12 Bolt Qty. 27 19. Attach two charcoal trays (X) to inside of lid and firebox assembly (B) using four M6x12 bolts (AA) each. GG M BB AA ASSEMBLY INSTRUCTIONS X B 20. Insert the divider panel (Y) into the inside of the lid and firebox assembly (B). 20 Y B 21. Place four grates (T) on lid and firebox assembly (B).
Wrench Qty. 1 B JJ M6x30 Bolt Qty. 2 M6 Lock Nut Qty. 3 M5 Lock Nut Qty. 8 LL II JJ M8 Nut Qty. 2 22 x2 M6x30 Bolt M5 Shoulder Bolt Qty. 8 JJ M8 Washer Qty. 2 Hardware Used KK 22. Attach one M6x30 bolt (JJ) on each side of lid and firebox assembly (B). DO NOT fully tighten. Hinge Bolt Qty. 2 GG Wheel Axle Sleeve Qty. 2 FF 23 B JJ U Cotter Pin Qty. 7 HH M6x20 Bolt Qty. 14 23.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-877-447-4768, 8:00 a.m. – 4:30 p.m. CST, Monday – Friday.
REPLACEMENT PARTS LIST PART DESCRIPTION Divider panel 41 Temperature gauge nut bezel 42 Charcoal access door frame only – right 43 Charcoal access door insert with hardware – right 44 Charcoal access door handle (left or right) 45 1 19 20 404-03006-01 213-02006 404-03014-01 404-03015-02 404-03017-01 32 3 4 PART # 12 6 42 2 5 39 7 8 17 21 40 22 31 41 43 24 45 10 23 44 25 13 11 16 9 14 26 18 28 15 27 30 38 29 34 33 37 35 19 36 Printed in China