Compact Vertical Charcoal Smoker & Grill MODEL #DGVS390BC / DGVS390BC-D DGVS390GC / DGVS390GC-D Français p. 24 Español p. 47 Save these instructions for future reference. If you are assembling this unit for someone else, give this manual to him or her to read and save for future reference.
DYNA-GLO® COMPACT VERTICAL CHARCOAL SMOKER & GRILL STOP! NO NEED TO RETURN TO THE STORE Questions With The Assembly? Require Parts Information? Product under Manufacturers Warranty? Call Toll Free : 1-877-447-4768 8:00 a.m. - 4:30 pm CST, Monday - Friday Retain This Owner's Manual And Proof Of Purchase For Future Reference To help us help you Fill in the information below Date of Purchase Place of Purchase Model Number Product Serial No.
TABLE OF CONTENTS Safety Information ...........................................................................................................................4 Package Contents ...........................................................................................................................7 Hardware Contents .........................................................................................................................8 Preparation .......................................................
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, call our customer service department at 1-877-447-4768, 8:00 a.m.- 4:30 p.m. CST, Monday - Friday. WARNINGS AND CAUTIONS: • This smoker is for outdoor use only, and shall not be used in a building, garage or any other enclosed area. • For residential use only. This smoker is NOT for commercial use.
SAFETY INFORMATION • When cooking, fire extinguishing materials shall be readily accessible. In the event of an oil/grease fire, do not attempt to extinguish with water. Use type BC dry chemical fire extinguisher or smother with dirt, sand or baking soda. • Always open smoker lid carefully and slowly as heat and steam trapped within smoker can severely burn you. • DO NOT leave smoker unattended while preheating or burning off food residue.
SAFETY INFORMATION • Always use a meat thermometer to ensure food is cooked to a safe temperature. • Never cover entire cooking area with aluminum foil. • Use protective gloves when assembling this product. • Do not force parts together as this can result in personal injury or damage to the product. • Use caution when lifting or moving cooled smoker to prevent strains and back injuries. • Death, serious injury or damage to property may occur if the above is not followed exactly.
PACKAGE CONTENTS 15 9 13 14 12 16 10 11 7 6 5 8 2 3 4 A 1 PART 1 2 3 4 5 6 7 8 DESCRIPTION QUANTITY Lower Damper Plate (L/R) 2 Bottom Smoker Section 1 Smoker Body Latch 3 Ash Pan 1 Charcoal Grate 1 Lower Support Brackets 3 Middle Smoker Section 1 Access Door Assembly 1 PART 9 10 11 12 13 14 15 16 7 DESCRIPTION QUANTITY Lid Handle & Left/Right Side Handles 3 Upper Support Brackets 3 Water Bowl 1 Cooking Grate 2 Temp Gauge w/ Nut 1 Lid Assembly 1 Lid Damper Plate 1 Dyna-Glo Badge 1
HARDWARE CONTENTS A B C D E M4 x 15 mm Screw M4 Wingnut M5 x 12 mm Shoulder Screw M5 Wingnut M5 x 12 mm Screw Qty. 9 Qty. 9 Qty. 4 Qty. 18 Qty. 12 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
ASSEMBLY INSTRUCTIONS Step 1 1 Parts Used 1 Side Damper Plate x2 2 Bottom Smoker Section x1 Smoker Body Latch x3 3 3 2 B A D 1 Hardware Used C A M4 x 15 mm Screw x6 B M4 Wingnut x6 C M5 x 12 mm Shoulder Screw x4 D M5 Wingnut x4 Step 2 2 Parts Used 4 Ash Pan x1 5 Charcoal Grate x1 5 4 9
ASSEMBLY INSTRUCTIONS Step 3 3 Parts Used 7 Middle Smoker Section x1 9 Left/Right Side Handles x2 E D 9 7 Hardware Used E M5 x 12 mm Screw x4 D M5 Wingnut x4 Step 4 4 Parts Used 8 Access Door Assembly x1 B Hardware Used A M4 x 15 mm Screw x2 B M4 Wingnut x2 8 10 A
ASSEMBLY INSTRUCTIONS 5 Step 5 Parts Used 6 Lower Support Brackets x3 10 Upper Support Brackets x3 6 D 10 Hardware Used E M5 x 12 mm Screw x6 D M5 Wingnut x6 E 6 Step 6 Place the smoker body onto the base. To lock the smoker base: Lift the lock lever upwards until the wire engages on the lip of the smoker body. See Fig 1a. To unlock the smoker base: Lift lock upwards until the wire disengages from the lip of the smoker body. See Fig 1b.
ASSEMBLY INSTRUCTIONS 7 Step 7 Parts Used 13 Temp Gauge w/ Nut x1 14 Lid Assembly x1 15 Lid Damper Plate x1 9 Lid Handle x1 16 Dyna-Glo Badge x1 9 13 A E 15 16 14 D B Hardware Used A M4 x 15 mm Screw x1 B M4 Wingnut x1 E M5 x 12 mm Screw x2 D M5 Wingnut x4 Step 8 8 Parts Used 11 Water Bowl x1 12 Cooking Grate x2 12 11 12
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-877-447-4768, 8:00 a.m. - 4:30 p.m. CST, Monday - Friday or e-mail us at customerservice@ghpgroupinc.com.
