Full Product Manual

MAINTENANCE

REPLACEMENT PARTS

1. Before cleaning, make sure the power has been turned off at the circuit

breaker panel and that the heating element of the heater is cool.

2. To maintain the external appearance of the heater, the unit occasionally needs

to be wiped with a dry duster. During the summer months, or at other times

when the appliance is not in use and is completely cold, it should be the wiped

over with a damp cloth.

3. Do not use abrasive clearing powders or furniture polish. Do not use chemical

or abrasive products, metallic scourers and so on, which may deteriorate the

surface, to clean the appliance.

4. During the summer months, or at other times when the appliance is not in

use, disconnect the power supply, and cover the whole appliance with a

dustcloth. Moreover, keep the appliance in a dry and cool place.

5. All other servicing should be performed by qualied service personnel. Do not

try to repair the heater yourself.

MAINTENANCE AND CLEANING

Part Description Part#

1 Back mesh EG5000001AC

2 Hanging plate EG5000002AC

3 Fan Blade EG5000003AC

4 Air guide plate EG5000004AC

5 Large handle seat EG5000005AC

6 Small handle seat EG5000006AC

7 Spring EG5000007AC

8 Motor EG5000008AC

Part Description Part#

9 Heater EG7500001AC

10 Selection Switch EG5000011AC

11 Main Board EG7500DH001AC

12 Terminal block EG5000014AC

13 Temperature CUT-OFF EG5000017AC

14 Control Panel Circuit Board EG7500DH002AC

15 Control Panel box EG7500DH003AC

16 Infrared Remote Control EG7500DH004AC