Use and Care Manual

PROPANE CONSTRUCTION HEATER
5
SPECIFICATIONS
USA 8-Hr Time weighted average
(OSHA 29 CFR 1926.55 App A)
CO 50 ppm
CO
2
5000 ppm
NO
2
USA – Ceiling Limit
(Short Term Exposure Limit = 15 minutes)
CO
CO
2
NO
2
5 ppm
Canada 8-hr time weighted average
WorkSafe BC OHS Guidelines Part 5.1
and Ontario Workplaces Reg 833
25 ppm
5000 ppm
3 ppm (Reg 833)
Canada STEL (15 minutes Reg 833/1 hour WSBC)
WorkSafe BC OHS Guidelines Part 5.1 and Ontario
Workplaces Reg 833
100 ppm
15000 ppm (WSBC)
30000 ppm (Reg 833)
1.0 ppm (WorkSafeBC)
5.0 ppm (Reg 833)
• Ensure that the ow of combustion and ventilation air exchange cannot become obstructed.
• As the building ‘tightens up’ during the construction phases ventilation may need to be increased.
Model No. FA 60 Series FA 125 Series
INPUT RATING 36000 BTU/hr , 60000 BTU/hr 70000 BTU/hr , 125000 BTU/hr
TYPE OF GAS PROPANE PROPANE
GAS SUPPLY PRESSURE TO REGULATOR MAXIMUM BOTTLE PRESSURE BOTTLE PRESSURE
MINIMUM (FOR PURPOSE OF INPUT ADJUSTMENT) 25 PSI / 172 KPa 25 PSI / 172 KPa
MANIFOLD PRESSURE 5 PSI 5 PSI
GAS CONSUMPTION (Lb/Hr) High-2.78 Low-1.67 High 5.79 Low-3.29
GAS CONSUMPTION (Kg/Hr) High-1.26 Low-0.76 High 2.63 Low-1.49
ELECTRICAL INPUT 120 V , 60 Hz 120 V , 60 Hz
AMPERAGE LOAD 0.22 AMPS 0.35 AMPS
IGNITION ELECTRONIC SPARK ELECTRONIC SPARK
SPARK GAP 4 mm (0.157”) 4 mm (0.157”)
SIZE (LxWxH)
43.9 cm x 19.8 cm x 35.1 cm
(17.3” x 7.8” x 13.8”)
56.9 cm x 22.1 cm x 43.7 cm
(22.4” x 8.7” x 17.2”)