Use and Care Manual

PROPANE CONSTRUCTION HEATER

UNPACKING HEATER

1. Remove heater from carton.

2. Remove all protective packing applied to heater for shipment.

3. Retain cartons and packaging material until unit is operated and found in good condition.

4. Check heater for any shipping damage. If heater shows any external or internal

damage, promptly inform dealer/distributor where you purchased heater.

Assembly Components and Instructions for Steel Base Units:

Regulator and Hose Connection:

(All Models)

See gure on right.

Connect the hose tightly to

the heater using a wrench.

Please also refer to

page 8 in the manual.

Tighten, clockwise,

use a wrench

Assembly Time:

5 Minutes

Contents:

All Models: Unit, Manual, Hose and

Regulator Assembly

Tools required for assembly:

All Models: Adjustable Wrench

NEVER LEAVE THE HEATER

UNATTENDED WHILE BURNING!

Hose Assembly