INDOOR/OUTDOOR PRODUCTS KEROSENE PORTABLE FORCED AIR HEATER “USER’S MANUAL AND OPERATING INSTRUCTIONS” COMPLIES WITH UL733 AND CAN/CSA/B140.0-03 AND CSA B140.8-1967 MODEL: SF70DGD MODEL: SF70H carefully. This USER’S MANUAL has been designed to instruct you as to the proper manner in which to assemble, maintain, store, and most Please keep this manual for future reference. CONSUMER : Retain this manual for future reference.
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! DANGER: IMPROPER USE OF THIS HEATER CAN RESULT IN SERIOUS INJURY OR DEATH FROM BURNS, FIRE, EXPLOSION, ELECTRICAL SHOCK AND/OR CARBON MONOXIDE POISONING. WARNINGS: 1. RISK OF INDOOR AIR POLLUTION! • Use this heater only in well ventilated areas. Provide at least a three-square foot (2,800 sq. cm.) opening of fresh outside air for each 100,000 BTU/hr. of heater rating. • People with breathing problems should consult a physician before using the heater.
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! CONTENTS OF USER’S MANUAL ITEM PAGE # PRECAUTIONS - SAFETY GUIDE 1. INTRODUCTION 2. FEATURES 3. UNPACKING AND ASSEMBLY 4. FUEL SELECTION 5. OVERVIEW OF HEATER DESIGN 6. FUELING YOUR HEATER 7. OPERATION 8. LONG TERM STORAGE OF YOUR HEATER 9. MAINTENANCE 10. TROUBLE SHOOTING GUIDE 11. WIRING DIAGRAM 12. SPECIFICATIONS 13. EXPLODED PARTS DRAWING 14. PARTS LIST 1 2 2 3 4 5 5 6 7 7 11 12 12 13 14 1. INTRODUCTION Please read this USER’S MANUAL carefully.
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! 3. UNPACKING AND ASSEMBLY 1. UNPACKING REMOVE THE HEATER AND ALL PACKING MATERIALS FROM THE BOX.( Fig. 2 ) NOTE : Save the shipping carton and packing materials for future storage. Handle Heat Shield Figure 2. Packing Materials 2. ASSEMBLY Bolt Tools Required • Medium Phillips Screw driver. Handle 1. Remove the pre-assembled Bolts on the shell and shell ring. 2. Align the holes in the shell with two mounting holes on the handle as shown in Figure3.
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! 4. FUEL SELECTION 1. All models can use 7 different fuels: K1 Kerosene, #1 Fuel Oil, #1, Diesel, #2 Fuel Oil, #2 Diesel, Jet A, JP-8 2. K1 Kerosene is recommended for optimal combustion and performance, and for less maintenance. K1 is also the optimal fuel choice in extremely low temperatures of 15°F or less, as its pour-point/"gel-point" varies 3.
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! 5. OVERVIEW OF HEATERS DESIGN The Fuel System : This heater is equipped with a high-pressure electronic pump. The pump draws fuel up from the fuel tank to the nozzle in the burner head. It is sprayed into the combustion chamber in a fine mist where it is mixed with air for combustion. The Air System : A blower motor assembly forces air around the combustion chamber, where it is super-heated and forced out the front of the chamber.
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! 7. OPERATION A.) VENTILATION RISK OF INDOOR AIR POLLUTION/USE HEATER ONLY IN WELL VENTILATED AREAS. Provide a fresh air opening of at least three square feet (2,800 sq. cm) for each 100,000 BTU/Hr. rating. Provide extra fresh air if more heaters are being used. Example : A heater requires one of the following: A SF70DGD SF70DGD/SF70H heater requires one of the following: • a two-car garage door raised six inches (15.
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! CAUTION : Do not disconnect the power source or unplug the power cord until the cooling cycle has been completed! TO RESTART THE HEATER 1.Wait 10 seconds after cooling cycle has completed. 2. Turn the Operating Switch to "ON" position. 3. Be sure to follow all starting procedure precautions. CAUTION : DO NOT operate heater without heat shield assembled to the heater. Temperature of the floor is hot while in operation.
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! Fuel Tank C) FUEL FILTER IN FUEL TANK Fuel Filter Clean twice per heating season or as needed 1) Pull Fuel Line off from Fuel Filter neck. 2) Turn Fuel Filter 90˚ to counter clockwise and pull to remove. 3) Remove Fuel Cap and Fuel Cap Filter. 4) Wash Filters with clean kerosene and replace in tank. 5) Attach Fuel Line to Fuel Filter neck. D) BURNER FULL ASSEMBLY REMOVAL 1) Remove Back Cover(See Page7) 2) Disconnect Cooling M/T Wire from Control PCB.
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! F) NOZZLE Burner Body Remove dirt in Nozzle or replace as needed 1) Remove Back Cover.(See Page 7) 2) Remove Burner Full Assembly.(See Page 8) 3) Remove Fuel Pipe from Electronic Pump and Burner Body using 12mm wrench. 4) Remove Ignitor Wire from Spark Plug. 5) Remove 3 screws with medium phillips screwdriver and remove Burner Assembly from Burner Supporter. 6) Remove 3 screws with screwdriver and remove Diffusion Cap and Sealing Pad from Burner Insulator.
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! H) FUEL PIPE Tightening Fuel Pipe annually or as needed. 1) Remove Back Cover.(See Page 7) 2) Remove Burner Full Assembly.(See Page 8) 3) Tighten Fuel Pipe at Electronic Pump and at Burner Body using 12mm wrench. 4) Inspect Fuel Line for damage. If damaged or cracked, Replace Fuel Line. I) ELECTRONIC PUMP Replace Electronic Pump if broke or damaged. 1) Remove Back Cover.(See Page 7) 2) Remove Burner Full Assembly.
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! 10. TROUBLE SHOOTING GUIDE TROUBLE POSSIBLE CAUSE CORRECTIVE ACTION Heater ignites but Control PCB Assembly shuts heater off after a short period of time. (Indicater Lamp is flickering once per 3sec.) 1. Dirty Fuel Filter. 2. Dirt in Nozzle. 3. Dirty Photocell Lens. 4. Photocell not properly installed. (Not seeing the flame) 5. Bad electrical connection between Photocell and Control PCB Assembly. 6. Defective Photocell. 7. Defective Electronic Pump. 8.
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! 11. WIRING DIAGRAM BLOWER FAN RPM SENSOR BLK RED YEL BHI DISPLAY PCB CN12 WHITE (Dis 3P) POWER LAMP (LED) CN8 BLACK OPERATING SWITCH LIMIT CONTROL (OVERHEAT THERMOSTAT) CN1 BHI BLUE PHOTO CELL CN5 WHITE VIBRATION SWITCH CN9 WHITE CN7 RED C O NP TC RB O L E/P IGNITOR SPARK PLUG CN4 WHITE I.
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! 13. EXPLODED PARTS DRAWING NOTE : SPECIFY MODEL NUMBER AND PART NUMBER WHEN ORDERING PARTS.
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! 14. PARTS LIST KEY NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 20-1 20-2 20-3 20-4 20-5 21 22 23 24 25 26 26-1 1-1 1-2 1-3 1-4 1-5 1-6 1-7 26-2 26-3 26-4 26-5 26-6 26-7 26-8 PART NO.
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! 14. PARTS LIST KEY NO. 26-9 26-10 26-11 26-12 26-13 26-14 14-1 14-2 14-3 14-4 14-5 14-6 14-7 14-8 26-15 26-16 26-17 26-18 26-19 26-20 26-21 26-22 26-23 26-24 26-25 26-26 27 28 29 30 31 32 33 34 35 36 37 38 39 PART NO.
Warranty LIMITED WARRANTY: This limited warranty is extended to the original retail purchaser of this Forced Air/Convection/Radiant Heater and warrants against any defect in materials and workmanship for a period of one (1) year from the date of retail sale.GHP Group, Inc., at it’s option, will either provide replacement parts or replace or repair the unit, when properly returned to the retailer where purchased or one of our service centers as directed by GHP Group,Inc.
WARRANTY REGISTRATION days of date of purchase. You can also register your warranty on the internet at www.ghpgroupinc.com. Complete the entire serial number. Retain this portion of the card for your records. GHP Group, Inc. 6440 W Howard St Niles, IL 60714-3302 Tel: (877) 447-4768 www.ghpgroupinc.com SAVE THIS CARD! Place Postage Stamp Here GHP Group, Inc.
PRODUCTOS PARA INTERIORES/EXTERIORES CALEFACTORE DE AIRE FORZADO PORTÁTILES DE KEROSENE “MANUAL DEL USUARIO E INSTRUCCIONES DE FUNCIONAMIENTO” CUMPLE CON UL733 Y CAN/CSA/B140.0-03 Y CSA B140.8-1967 MODEL: SF70DGD MODEL: SF70H Antes de utilizar por primera vez este calefactor, lea muy atentamente el MANUAL DEL USUARIO. Este MANUAL DEL USUARIO ha sido diseñado para enseñarle la forma correcta de ensamblar, mantener, guardar y, Conserve este manual para consultarlo cuando sea necesario.
NUNCA DEJE DESATENDIDO EL CALEFACTOR MIENTRAS ESTÁ ENCENDIDO. PELIGRO: EL USO INCORRECTO DE ESTE CALEFACTOR PUEDE OCASIONAR LESIONES GRAVES O LA MUERTE POR QUEMADURAS, INCENDIO, EXPLOSIÓN, DESCARGA ELÉCTRICA Y/O INTOXICACIÓN POR MONÓXIDO DE CARBONO. ADVERTENCIAS: 1. RIESGO DE CONTAMINACIÓN DEL AIRE EN INTERIORES • Utilice este calefactor solo en áreas bien ventiladas.
NUNCA DEJE DESATENDIDO EL CALEFACTOR MIENTRAS ESTÁ ENCENDIDO. CONTENIDO DEL MANUAL DEL USUARIO N.º DE PÁG. TEMA PRECAUCIONES - GUÍA DE SEGURIDAD 1. INTRODUCCIÓN 2. CARACTERÍSTICAS 3. DESEMBALAJE Y ENSAMBLAJE 4. SELECCIÓN DEL COMBUSTIBLE 5. DESCRIPCIÓN GENERAL DEL DISEÑO DEL CALEFACTOR 6. CÓMO ALIMENTAR EL CALEFACTOR 7. FUNCIONAMIENTO 8. ALMACENAMIENTO A LARGO PLAZO DEL CALEFACTOR 9. MANTENIMIENTO 10. GUÍA PARA LA RESOLUCIÓN DE PROBLEMAS 11. DIAGRAMA DE CABLEADO 12. ESPECIFICACIONES 13.
NUNCA DEJE DESATENDIDO EL CALEFACTOR MIENTRAS ESTÁ ENCENDIDO. 3. DESEMBALAJE Y ENSAMBLAJE 1. DESEMBALAJE RETIRE EL CALEFACTOR Y TODOS LOS MATERIALES DE EMBALAJE DE LA CAJA.(Figura 2 ) NOTA: Guarde la caja de envío y los materiales de embalaje para almacenamiento futuro. Manija Pantalla térmica Figura 2. Materiales de embalaje 2. ENSAMBLAJE Herramientas requeridas • Destornillador Phillips de tamaño medio. 1. Quite los pernos ensamblados previamente en la carcasa y el anillo de la carcasa. 2.
NUNCA DEJE DESATENDIDO EL CALEFACTOR MIENTRAS ESTÁ ENCENDIDO. 4. SELECCIÓN DEL COMBUSTIBLE: 1. Todos los modelos pueden usar 7 combustibles diferentes: kerosén 1-K, fueloil n.º 1 diesel n.º 1, fueloil n.º 2, diesel n.º 2, JET A, JP-8. 2. El kerosén 1-K se recomienda para una combustión y rendimiento óptimos, y para menos mantenimiento.
NUNCA DEJE DESATENDIDO EL CALEFACTOR MIENTRAS ESTÁ ENCENDIDO. 5. DESCRIPCIÓN GENERAL DEL DISEÑO DEL CALEFACTOR Sistema de combustible: Este calefactor está equipado con una bomba electrónica de alta presión. La bomba extrae combustible del tanque de combustible en dirección ascendente hasta la boquilla del cabezal del quemador.
NUNCA DEJE DESATENDIDO EL CALEFACTOR MIENTRAS ESTÁ ENCENDIDO. 7. FUNCIONAMIENTO A.) VENTILACIÓN RIESGO DE CONTAMINACIÓN DEL AIRE EN INTERIORES/UTILICE EL CALEFACTOR SOLO EN ÁREAS BIEN VENTILADAS. Mantenga una abertura para que ingrese aire fresco de al menos tres pies cuadrados (2800 cm cuadrados) por cada 100 000 BTU/h según las condiciones nominales de funcionamiento del calefactor. Mantenga otras aberturas para que ingrese aire fresco adicional si se utilizan más calefactores.
NUNCA DEJE DESATENDIDO EL CALEFACTOR MIENTRAS ESTÁ ENCENDIDO. PRECAUCIÓN: No desconecte la fuente de alimentación ni desenchufe el cable de alimentación hasta que se haya completado el ciclo de enfriamiento. PARA VOLVER A ENCENDER EL CALEFACTOR 1. Espere 10 segundos después de que se haya completado el ciclo de enfriamiento. 2. Coloque el interruptor de funcionamiento en la posición “ON” (ENCENDIDO). 3. Asegúrese de tomar todas las precauciones del procedimiento de encendido.
NUNCA DEJE DESATENDIDO EL CALEFACTOR MIENTRAS ESTÁ ENCENDIDO. Tanque de Combustible Filtro de Combustible C.) FILTRO DE COMBUSTIBLE DEL TANQUE DE COMBUSTIBLE Limpie dos veces por temporada de uso o según sea necesario. 1) Quite la manguera de combustible del cuello del filtro de combustible. 2) Gire el filtro de combustible 90 grados en sentido contrario a las agujas del reloj y jálelo para retirarlo. 3) Retire la tapa de combustible y el filtro de la tapa de combustible.
NUNCA DEJE DESATENDIDO EL CALEFACTOR MIENTRAS ESTÁ ENCENDIDO. F.) BOQUILLA Cuerpo del quemador Quite la suciedad de la boquilla o reemplácela según sea necesario. 1) Retire la cubierta trasera (consulte la página 7). 2) Retire el conjunto completo del quemador (consulte la página 8). 3) Retire el conducto de combustible de la bomba electrónica y del cuerpo del quemador utilizando una llave de 12 mm. 4) Retire el cable del dispositivo de encendido de la bujía.
NUNCA DEJE DESATENDIDO EL CALEFACTOR MIENTRAS ESTÁ ENCENDIDO. H.) CONDUCTO DE COMBUSTIBLE Ajuste el conducto de combustible anualmente o según sea necesario. 1) Retire la cubierta trasera (consulte la página 7). 2) Retire el conjunto completo del quemador (consulte la página 8) 3) Ajuste el conducto de combustible de la bomba electrónica y del cuerpo del quemador utilizando una llave de 12 mm. 4) Verifique que la manguera de combustible no esté dañada. Si está dañada o agrietada, reemplácela. I.
NUNCA DEJE DESATENDIDO EL CALEFACTOR MIENTRAS ESTÁ ENCENDIDO. 10. GUÍA PARA LA RESOLUCIÓN DE PROBLEMAS PROBLEMA POSIBLE CAUSA ACCIÓN CORRECTIVA El calefactor se enciende pero el conjunto de la PCB de control apaga el calefactor después de un período breve. (La luz indicadora titila una vez cada 3 segundos). 1. Filtro de combustible sucio. 2. Suciedad en la boquilla. 3. Lente de la fotocélula sucia. 4. La fotocélula no está instalada correctamente. (No se ve la llama). 5.
NUNCA DEJE DESATENDIDO EL CALEFACTOR MIENTRAS ESTÁ ENCENDIDO. 11.
NUNCA DEJE DESATENDIDO EL CALEFACTOR MIENTRAS ESTÁ ENCENDIDO. 13. VISTA DESARROLLADA DE LAS PIEZAS NOTA: ESPECIFIQUE EL NÚMERO DE MODELO Y EL NÚMERO DE PIEZA CUANDO SOLICITA PIEZAS.
NUNCA DEJE DESATENDIDO EL CALEFACTOR MIENTRAS ESTÁ ENCENDIDO. 14. LISTA DE PIEZAS N.º DE REFERENCIA 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 20-1 20-2 20-3 20-4 20-5 21 22 23 24 25 26 26-1 1-1 1-2 1-3 1-4 1-5 1-6 1-7 26-2 26-3 26-4 26-5 26-6 26-7 26-8 N.
NUNCA DEJE DESATENDIDO EL CALEFACTOR MIENTRAS ESTÁ ENCENDIDO. 14. LISTA DE PIEZAS N.º DE REFERENCIA 26-9 26-10 26-11 26-12 26-13 26-14 14-1 14-2 14-3 14-4 14-5 14-6 14-7 14-8 26-15 26-16 26-17 26-18 26-19 26-20 26-21 26-22 26-23 26-24 26-25 26-26 27 28 29 30 31 32 33 34 35 36 37 38 39 N.
GARANTÍA GARANTÍA LIMITADA: Esta garantla limitada es extendida al comprador original al detalle de este Calentador de Aire Forcade/ Convecci6n/ Radiante y garantiza contra culquier defecto en materiales y funcionamiento por un periodo de un (1) año desde la fecha de vents al detalle. GHP Group.Inc.
REGISTRO DE GRATANTÍA IMPORTANTE: Lo invitamos a completar nuestro formulario de registro de garantía dentro de los siguentes 14 días a la fecha de compta. Usted tembién puede registar su garantía en el internet en www.ghpgroupinc.com. Complete el número de serie. Conserve esta parte de la tarjeta como su comprobante. GHP Group, Inc. 6440 W Howard St Niles, IL 60714-3302 Tel: (877) 447-4768 www.ghpgroupinc.com ¡GUARDE ESTA TARJETA! Ponga una Estampa Postal Aquí GHP Group, Inc.
PRODUITS D’INTÉRIEUR OU D’EXTÉRIEUR RADIATEUR PORTABLE À AIR PULSÉ AU KÉROSÈNE « GUIDE DE L’UTILISATEUR ET INSTRUCTIONS DE FONCTIONNEMENT » CONFORME AUX NORMES UL733, CAN/CSA B140.0-03 ET CSA B140.8-1967 MODEL: SF70DGD MODEL: SF70H Avant la première utilisation de ce radiateur, veuillez lire très attentivement le présent GUIDE DE L’UTILISATEUR.
NE LAISSEZ JAMAIS LE RADIATEUR SANS SURVEILLANCE PENDANT QU’IL CHAUFFE DANGER :UNE MAUVAISE UTILISATION DE CE RADIATEUR PEUT ENTRAÎNER DE GRAVES BLESSURES OU LA MORT À LA SUITE DE BRÛLURES, D’UN INCENDIE, D’UNE EXPLOSION, D’UNE DÉCHARGE ÉLECTRIQUE OU D’UNE INTOXICATION PAR LE MONOXYDE DE CARBONE. AVERTISSEMENTS : 1. RISQUE DE POLLUTION INTÉRIEURE • Utilisez ce radiateur dans un endroit bien aéré uniquement.
NE LAISSEZ JAMAIS LE RADIATEUR SANS SURVEILLANCE PENDANT QU’IL CHAUFFE TABLE DES MATIÈRES NO DE PAGE ÉLÉMENT 1 2 2 3 4 5 5 6 7 7 11 12 12 13 14 PRÉCAUTIONS – GUIDE DE SÉCURITÉ 1. INTRODUCTION 2. CARACTÉRISTIQUES 3. DÉBALLAGE ET ASSEMBLAGE DU PRODUIT 4. CHOIX DE COMBUSTIBLES 5. APERÇU DE LA CONCEPTION DU RADIATEUR 6. REMPLISSAGE DU RADIATEUR 7. FONCTIONNEMENT 8. ENTREPOSAGE À LONG TERME DU RADIATEUR 9. ENTRETIEN 10. GUIDE DE DÉPANNAGE 11. SCHÉMA DE CÂBLAGE 12. CARACTÉRISTIQUES TECHNIQUES 13.
NE LAISSEZ JAMAIS LE RADIATEUR SANS SURVEILLANCE PENDANT QU’IL CHAUFFE 3. DÉBALLAGE ET ASSEMBLAGE DU PRODUIT 1. DÉBALLAGE ENLEVEZ LE RADIATEUR ET TOUS LES MATÉRIAUX 2). REMARQUE : Conservez le carton d’expédition et les matériaux d’emballage pour un entreposage futur. Poignée Figure 2. Matériaux d’emballage 2. ASSEMBLAGE Outils requis • Tournevis cruciforme de taille moyenne. 1. Retirez les boulons préassemblés de la coque et de l’anneau de la coque. 2.
NE LAISSEZ JAMAIS LE RADIATEUR SANS SURVEILLANCE PENDANT QU’IL CHAUFFE 4. CHOIX DE COMBUSTIBLES 1. Tous les modèles peuvent utiliser sept combustibles différents : du kérosène K1, du mazout no 1, du diesel n 1, du mazout no 2, du diesel no 2, du carburant JET A et du JP-8. 2. Le kérosène K1 est recommandé pour une combustion et des performances optimales et pour moins d’entretien.
NE LAISSEZ JAMAIS LE RADIATEUR SANS SURVEILLANCE PENDANT QU’IL CHAUFFE 5. APERÇU DE LA CONCEPTION DU RADIATEUR Le circuit de carburant : Le radiateur est équipé d’une pompe électronique à haute pression. La pompe aspire du carburant à partir du réservoir à carburant jusqu’à la buse sur la tête du brûleur. Il est ensuite vaporisé dans la chambre de L’alimentation en air : de la chambre pendant le fonctionnement du radiateur; il fonctionne également pendant la période de refroidissement.
NE LAISSEZ JAMAIS LE RADIATEUR SANS SURVEILLANCE PENDANT QU’IL CHAUFFE 7. FONCTIONNEMENT A.) VENTILATION RISQUE DE POLLUTION INTÉRIEURE/UTILISEZ CE RADIATEUR DANS UN ENDROIT BIEN AÉRÉ UNIQUEMENT. Laissez une ouverture d’au moins 3 pi2 (2 800 cm2) pour faire entrer l’air frais extérieur pour chaque 100 000 BTU/h dégagé par le radiateur. Fournissez de l’air frais supplémentaire si plus d’un radiateur est utilisé.
NE LAISSEZ JAMAIS LE RADIATEUR SANS SURVEILLANCE PENDANT QU’IL CHAUFFE MISE EN GARDE : Ne déconnectez pas la source d’énergie et ne débranchez pas le cordon d’alimentation avant que le cycle de refroidissement soit terminé. POUR REDÉMARRER LE RADIATEUR 1. Attendez 10 2. Ramenez l’interrupteur de commande en position « ON » (marche). 3. Assurez-vous de suivre toutes les précautions de la procédure de démarrage. MISE EN GARDE : N’utilisez PAS le radiateur sans avoir installé l’écran thermique.
NE LAISSEZ JAMAIS LE RADIATEUR SANS SURVEILLANCE PENDANT QU’IL CHAUFFE Réservoir à carburant Filtre à carburant C.) FILTRE DU RÉSERVOIR À CARBURANT Nettoyez deux fois par saison de chauffage ou au besoin. 1) Retirez la conduite de carburant de l’embout du filtre à carburant. 2) Tournez le filtre à carburant sur 90 degrés dans le sens antihoraire, puis tirez pour l’enlever. 3) Retirez le bouchon du réservoir et le filtre du bouchon du réservoir.
NE LAISSEZ JAMAIS LE RADIATEUR SANS SURVEILLANCE PENDANT QU’IL CHAUFFE F.) BUSE Corps du brûleur Délogez la saleté de la buse ou remplacez la buse au besoin. 1) Retirez le couvercle arrière (voir page 7). 2) Retirez l’ensemble complet du brûleur (voir page 8). 3) Retirez le tuyau d’alimentation de la pompe électronique et du corps du brûleur à l’aide d’une clé à molette de 12 mm. 4) Débranchez le câble de l’allumeur de la bougie d’allumage.
NE LAISSEZ JAMAIS LE RADIATEUR SANS SURVEILLANCE PENDANT QU’IL CHAUFFE H.) TUYAU D’ALIMENTATION Serrez le tuyau d’alimentation chaque année ou au besoin. 1) Retirez le couvercle arrière (voir page 7). 2) Retirez l’ensemble complet du brûleur (voir la page 8). 3) Serrez le tuyau d’alimentation à la pompe électronique et au corps du brûleur à l’aide d’une clé à molette de 12 mm. 4) I.) POMPE ÉLECTRONIQUE Remplacez la pompe électronique si elle est brisée ou endommagée.
NE LAISSEZ JAMAIS LE RADIATEUR SANS SURVEILLANCE PENDANT QU’IL CHAUFFE 10. GUIDE DE DÉPANNAGE PROBLÈME Le radiateur s’allume, mais la carte de circuits imprimés de contrôle l’éteint après une courte période. (Le voyant lumineux clignote une fois toutes les trois secondes.) CAUSE POSSIBLE 2. Il y a de la saleté dans la buse. 3. La lentille de la cellule photoélectrique est sale. 4. La cellule photoélectrique est mal installée 5.
NE LAISSEZ JAMAIS LE RADIATEUR SANS SURVEILLANCE PENDANT QU’IL CHAUFFE 11.
NE LAISSEZ JAMAIS LE RADIATEUR SANS SURVEILLANCE PENDANT QU’IL CHAUFFE 13. VUE ÉCLATÉE DES PIÈCES REMARQUE : PRÉCISEZ LE NUMÉRO DU MODÈLE ET LE NUMÉRO DE LA PIÈCE LORSQUE VOUS COMMANDEZ DES PIÈCES.
NE LAISSEZ JAMAIS LE RADIATEUR SANS SURVEILLANCE PENDANT QU’IL CHAUFFE 14.
NE LAISSEZ JAMAIS LE RADIATEUR SANS SURVEILLANCE PENDANT QU’IL CHAUFFE 14.
Garantie GARANTIE RESTREINTE: Cette garantie est offerte aur premier acheteur du radiateur á air pulsé/ réchaud rayonnat/ radiateur á convection. Cette garanti couvre les défauts de fabrication et de matériel pendant une année (1) á compter de la date de vente au détail. En tel cas, GHP Group Inc. choisira soit de fournir des piéces de remplacement, d'échanger ou de réparer l'appareil, et ce, á condition que l'appareil soit retourné chez le détaillant ou á un centre de service GHP Group Inc.
ENREGISTREMENT DE LA GARANTIE IMPORTANT: Nous vous conseillons forement de remplir la carte d'enregistrement au cours des quatorze (14) journées suivant la date de l'achat. Vous pouves aussi enregistrer la garantie en ligne au: www.ghpgroupinc.com. Écrivez le numéro de série. Gardez cette partie de la carte pour vos dossiers. GHP Group, Inc. 6440 W Howard St Niles, IL 60714-3302 Tel: (877) 447-4768 www.ghpgroupinc.com CONSERVEZ CETTE CARTE! Apposez Un timbre ici GHP Group, Inc.
Saskatchewan Quebec Prince Edward Island Ontario Newfoundland Manitoba Alberta Mark's Mini-Tune Ray's Electric Motor Rebuilders Guillemette Energies Vessey's Equipment Sandham Electric LTD. Pro Equipment Repair & Sales Active Tool Repair George Power Tools Service, Inc AJV Tools Ltd Speedy Tool Repair & Industrial Supplies The Tool Doctor Murray's Tool Repair A.C. Jenkins Repair LTD.
Florida Connecticut Colorado California Arizona Arkansas Alabama Alaska Cutler Repair Service & Sales Inc. Integrated Industrial Services, Inc. Tool & Equipment Service Solution, LLC. AAA Propane Sales & Rental, Inc. High Desert Outdoor Power Metro Gas Equipment Co. Miller Electric Motor Service Inc Pueblo West Rental Center Azar EMS Boyce Industries, Inc.
Illinois Idaho Iowa Georgia Andy's Tool Repair Ben's Rental & Sales Brockhouse Sales & Service Carter's Small Engine Repair Custom Labor Unlimited F.B. McAfoos & Co Farm & Fleet of Belvidere #11 Farm & Fleet of Bloomington #17 Farm & Fleet of Decatur #23 Farm & Fleet of Kankakee #21 Farm & Fleet of Loves Park #31 Hahn Tool Repair J & J Enterprises Rick´s Electric Inc Rossiter Electric Motor U-Rent, Inc. Beals Motor Rewind Blink Electric Motors, Inc.
Kentucky Kansas Indiana Adam's Repair Service Gillum's Sales & Repair, Inc Hedgepeth Supply Co Morris Electric & Repair Naab Electric, Inc. All-Pro Repair Service Eskew Enterprises, Inc. General Rental Center, Inc. Griffith Rentals & Sales Industrial Motor & Tool Industrial Tool Sales & Service, Inc. LaFayette Mower Repair Midway Rentals, Inc. New Paris Pro Hardware & Farm Store Nichols Supply R &C'S Small Enginge Repair S & J Small Engine Sarver's Angola Power Equipment Co.
Michigan Maine Maryland Massachusetts Louisiana A-1 Rental, Inc. All Parts Equipment and Accessories Bill's Repair and Sharpening Bob´s Service Shop L.L.C. Bush Hardware CMR(Copenhaver Machine & Tool Repair) Contractors Equipment & Supply Don's Tractor & Equipment Sales Joe's Lawn and Garden Lange & Leaman Electric Mac's Service Equipment Martin Electric Motor Sales & Service Master Service Center Mid-Michigan Reapir Service, Inc. Millmark Products, Inc. Roger Agotte Electric, Inc.
North Dakota North Carloina Montana Missouri Minnesota Burke Outdoor, Inc. Express Pump Repair General Motor Repair & Service, Inc. Handy Rental, Inc. Haywood Tractor & Implement Haywood Tractor Company, Inc. Hufhams Small Engines J & S Tool Repair JE Womble & Sons; Small Engine Shop Leonard Electric Motor Repair, Inc. Lexington Mower Service McLamb LP Gas & Supply Co. Moores Dairy Equipment, Inc.
New York Nevada New Mexico New Jersey Nebraska All In One Rentals Astronumatic, LTD. C.I. Horst Small Engine Repair Eldred Power Equipment & Auto Parts, Inc. Forestiere Power Tool & Equip. Co. G & R´s Repair Good Day Dist. Ltd. Greg's Tractor and Small Engine Repair Groton Cycle Center Kerber & Sons Loper's Equipment Corp. Moyer's Sales & Services P & C Repair Para-Deys Tools Ped´s Electric Service R & D Mower & Snowblower Sales & Service, Inc.
Pennsylvania Oklahoma Ohio Brady's Small Engine Repair Brown's Equipment & Supply Co. Brownsville Hardware Burkholder's Motor Repair All Seasons Small Engine Repair Enid Electric Motor Service, Inc. Equipment One Rental & Sales, Inc. Mike's Sales & Repair Smith´s Small Engine Tauber LLC Apple Farm Supply Inc Brian Frank's Electric, Inc. Cambridge Power Inc.
Tennessee South Dakota South Carolina Rhode Island Authorized Equipment Service D & J Small Engines Jerry's A to Z Inc. Macon Small Engines Manchester Small Engine Master Repair Services Red Barn Motor Sports & Power Equipment, Inc. Roger's Electric Motor Service Ed's Repair / Stout Enterprises Four Bridges Small Engines La Porte's Mullins Tool Rental Summerville Lawn Mower & Heater Colonial Fix-It Shop & Small Appliance Hospital, Inc. Charles J.
Wisconsin Washington Utah Texas American Power Equipment Inc. Appliance Repair Bennett's Electric Motor Service Craig's Small Engine Farm & Fleet of Baraboo #28 Farm & Fleet of Chippewa Falls #09 Farm & Fleet of Dodgeville, Inc. #02 Burke Power Equipment & Small Engine Repair CHS Equipment Repair Services Industrial Specialties, Inc. Tuco Industrial Products, Inc.
Wyoming West Virginia Keith´s Small Engine Repair L & P Equipment & Repair Biedler´s Electric Motor Repair, Inc. Genteck Repair, LLC. Mac's Garage Nitro Lawnmower & Chainsaw, LLC. Noel's Outdoor Power Equipment Farm & Fleet of Janesville, Inc. #03 Farm & Fleet of LaCrosse #27 Farm & Fleet of Madison, Inc. #22 Farm & Fleet of Monroe, Inc. #24 Farm & Fleet of Oak Creek #29 Farm & Fleet of Platteville, Inc. #07 Farm & Fleet of Rice Lake, Inc.