User's Manual TECRA A40-K TECRA A50-K PORTEGE X40-K
Table of Contents Chapter 1 Legal, Regulatory, and Safety Copyright, Disclaimer and Trademarks .............................................. 1-1 Regulatory Information ......................................................................... 1-2 Video Standard Notice ........................................................................ 1-10 OpenSSL Toolkit License Issues ....................................................... 1-10 FreeType License Issues ................................................
LAN ....................................................................................................... 4-22 USB Type-C™ Adapters ..................................................................... 4-24 Wireless display .................................................................................. 4-26 Security lock ........................................................................................ 4-27 Optional Accessories .....................................................................
Chapter 1 Legal, Regulatory, and Safety This chapter states the legal, regulatory, and safety information applicable to your computer. Copyright, Disclaimer and Trademarks Copyright © 2022 Dynabook Inc. All Rights Reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Dynabook Inc. No patent liability is assumed, with respect to the use of the information contained herein.
The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG, Inc. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. DTS, the Symbol, & DTS and the Symbol together are registered trademarks and DTS Audio Processing is a trademark of DTS, Inc. Wi-Fi is a registered trademark of Wi-Fi Alliance.
Thunderbolt™ 4/USB Type-C™ port and HDMI™ out port. Changes or modifications made to this equipment, not expressly approved by Dynabook or parties authorized by Dynabook could void the user’s authority to operate the equipment. FCC conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. 2. This device may not cause harmful interference.
EU Declaration of Conformity This product is carrying the CE mark in accordance with the related European Directives. Responsible for CE marking is Dynabook Europe GmbH, Stresemannallee 4b, 41460 Neuss, Germany. The complete and official EU Declaration of Conformity can be found on the website https://emea.dynabook.com/product-conformity. CE compliance Hereby, Dynabook Europe GmbH declares that the model(s) described in this manual is/are in compliance with Directive 2014/53/EU.
Any consequences resulting from the use of this product in working environments that are not verified/recommended are not the responsibility of Dynabook.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Following information is only valid for EU member states: Information requirements Regulation EC 1275/2008 Additional information as required by Regulation (EC) 1275/2008 amended by Regulation (EU) 801/2013 implementing European Ecodesign Directive with regard to requirements for standby, off mode and networked standby electric power consumption of electrical and electronic household and office equipment can be found here: http://emea.dynabook.com/environment.
Disposal of batteries and/or accumulators The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste. If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the European Battery Directive, then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
Following information is only for Turkey: Disposal of products: The crossed-out wheelie bin symbol means that this product should not be collected and disposed of with other household waste. When the product becomes waste at its end of life, to protect environment and human health, it should be given to the nearest collection, recycling or disposal center.
Video Standard Notice THIS PRODUCT IS LICENSED UNDER THE AVC, THE VC-1 AND MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (I) ENCODING VIDEO IN COMPLIANCE WITH THE ABOVE STANDARDS ("VIDEO") AND/OR (II) DECODING AVC, VC-1 AND MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE SUCH VIDEO.
5. 6. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit" [http://www.openssl.org].
This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. 2. 3. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg Introduction ============ The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license.
authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project', be they named as alpha, beta or final release. `You' refers to the licensee, or person using the project, where `using' is a generic term including compiling the project's source code as well as linking it to form a `program' or `executable'. This program is referred to as `a program using the FreeType engine'.
-------------Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission. We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your documentation or advertising materials: `FreeType Project', `FreeType Engine', `FreeType library', or `FreeType Distribution'. As you have not signed this license, you are not required to accept it.
ENERGY STAR® Program Your computer model may be ENERGY STAR® compliant. If the model you purchased is compliant, it will be listed on the following website: https://www.energystar.gov/ productfinder/product/certified-computers . Dynabook is a partner in the ENERGY STAR program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency.
General Precautions Your computer is designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the following general precautions and to note the cautions included in the text of the manual.
Stress injury Carefully read the Instruction Manual for Safety and Comfort. It contains information on the prevention of stress injuries to your hands and wrists that can be caused by extensive keyboard use. It also includes information on work space design, posture, and lighting that can help reduce physical stress. Heat injury Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm.
Moving the computer While the computer is designed for flexible day-to-day usage, you should exercise a few simple precautions when moving it in order to help ensure trouble-free operation. Make sure all disk/disc activity has ended before moving the computer. Turn off (shut down) the computer. Disconnect the AC adaptor and all peripherals before moving the computer. Close the display panel. Do not pick up the computer by its display panel.
Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions. A caution informs you that improper use of equipment or failure to follow instructions might cause data loss, equipment damage, or might result in minor or moderate injury. Please read. A note is a hint or advice that helps you make best use of your equipment.
Chapter 2 Getting Started This chapter provides an equipment checklist, and basic information to start using your computer. If you use an operating system that was not pre-installed by Dynabook, some of the features described in this manual might not function properly. You might not have all the software mentioned in this manual depending on the model you purchased. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.
Click Tap the Touch Pad or click the left Touch Pad control button once. Left-click the mouse once. Tap the touch screen once (only for touch screen models). Right-click Click the right Touch Pad control button once. Right-click the mouse once. Press and hold on the touch screen (only for touch screen models). Double-click Tap the Touch Pad or click the left Touch Pad control button twice. Left-click the mouse twice. Tap the touch screen twice (only for touch screen models).
Connecting the AC adaptor Opening the display Turning on the power Initial setup Getting to know Windows Use a virus-check program and make sure that it is updated regularly. Never format storage media without checking its content - formatting destroys all stored data. It is a good idea to back up the internal Solid-State Drive or other main storage device to external media periodically.
The supplied power cord conforms to safety rules and regulations in the region the computer is bought and should not be used outside this region. For use in other regions, buy power cords that conform to safety rules and regulations in the particular region. Do not use a 3-pin to 2-pin conversion plug. When you connect the AC adaptor to the computer, always follow the steps in the exact order as described in this User’s Manual. As a general safety precaution, avoid touching any metal parts.
2. Connect the DC output plug of the AC adaptor to the DC IN 19V jack on your computer. Figure 2-3 Connecting the DC output plug to the computer 2 1 1. DC IN 19V jack 2. DC output plug Product appearance depends on the model you purchased. 3. Plug the power cord into a live wall outlet. The DC IN/Battery indicator glows. USB Type-C™ port connection type 1. Connect the power cord to the AC adaptor.
3. Connect the DC output plug of the AC adaptor to one of the Thunderbolt™ 4/USB Type-C™ ports on your computer. The DC IN/ Battery indicator glows. Figure 2-6 Connecting the DC output plug to the computer 2 1 1. Thunderbolt™ 4/USB Type-C™ port 2. DC output plug Opening the display The display panel can be opened to a wide range of angles (up to 180 degrees) for optimal viewing.
Do not close the computer with pens or any other objects left in between the display panel and the keyboard. When opening or closing the display panel, place one hand on the palm rest to hold the computer in place and use the other hand to slowly open or close the display panel. Do not use excessive force when opening or closing the display panel. Do not press or push with excessive force on the display screen, otherwise the computer might become unsteady and possibly fall over.
Initial setup The Windows Startup Screen is the first screen displayed when you turn on the power. To install the operating system properly, follow the on-screen instructions on each screen. When it is displayed, be sure to read the license terms and license agreement carefully. Getting to know Windows For detailed information on what is new and how to operate Windows, refer to Tips in the Start menu.
the internet. To talk with Cortana, an internal or external microphone is required. Settings Settings provides system settings including advanced settings in the Control Panel. They are divided in categories so that you can configure, optimize, or personalize Windows. You can also type in the keyword, and use Search to find any setting. To open Settings, click Start -> Settings ( ).
Turning off the power The power can be turned off in one of the following modes, either Shut Down Mode, Sleep Mode or Hibernation Mode. Shut Down Mode When you turn off the power in Shut Down Mode, no data will be saved and the computer will boot to the main screen of the operating system the next time it is turned on. 1. 2. If you have entered data, either save it to the internal storage drive or to other storage media. Make sure all disk/disc activity has stopped before removing the disk/ disc.
mode, data is maintained in the main memory of the computer. When you turn on the power again, you can continue working right where you left off. When you have to turn off your computer aboard an aircraft or in places where electronic devices are regulated or controlled, always shut down the computer. This includes turning off any wireless communication functionalities, and canceling settings that reactivate the computer automatically, such as a timer recording function.
Close the display panel. Note that this feature must be enabled within the Power Options. Press the power button. Note that this feature must be enabled within the Power Options. When you turn the power back on, you can continue where you left off when you shut down the computer. If you are operating the computer on battery power, you can lengthen the overall operating time by turning it off into Hibernation Mode. Sleep Mode consumes more power while the computer is off.
Starting Hibernation Mode To enter Hibernation Mode, click Start -> Hibernate. (Power) and then select To show Hibernate in Power menu, set up according to the following steps: 1. Click Start -> All apps -> Windows Tools and double-click Control Panel. 2. In the Control Panel window, click System and Security -> Power Options. 3. Click Choose what the power button does or Choose what closing the lid does. 4. Click Change settings that are currently unavailable. 5.
Restoring the pre-installed software from your created Recovery Media Restoring the pre-installed software from the Recovery Partition If you choose dynabook Maintenance Utility to erase the internal storage drive, all data including the operating system and recovery partition will be deleted. In that case, you cannot create recovery media or restore the preinstalled software from the recovery partition. Make sure that you have already created recovery media before you start dynabook Maintenance Utility.
Some of the disc media might not be compatible with the optical disc drive connected to your computer. You should therefore verify that the optical disc drive supports the blank media you have chosen before proceeding. USB Flash Memory will be formatted and all the data in the USB Flash Memory will be lost when proceeding. 2. 3. 4. 5. Turn on your computer and allow it to load the Windows operating system from the internal storage drive as normal.
5. A menu is displayed from which you should follow the on-screen instructions. If you have previously chosen to remove the recovery partition without creating Recovery Media, the Recovery Media cannot be created. However, if you have already created a Recovery Media, you can use it to restore the recovery partition. If you have not created Recovery Media, contact Technical Support for assistance.
Chapter 3 The Grand Tour This chapter identifies the various components of the computer. It is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, refer to the Legal Footnotes section. Handle your computer carefully to avoid scratching or damaging the surface.
Figure 3-2 The left side of the computer (PORTEGE Series) 1 2 2 3 4 5 1. DC IN 19V jack 2. Thunderbolt™ 4/USB Type-C™ port 3. HDMI™ out port 4. Universal Serial Bus (USB 3.2 Gen1) port 6 7 5. Headphone/Microphone jack 6. DC IN/Battery indicator 7. Power indicator Product appearance depends on the model you purchased. DC IN 19V jack The AC adaptor connects to this jack in order to power the computer and charge its internal battery.
Universal Serial Bus (USB 3.2 Gen1) port One Type-A Universal Serial Bus port, which complies to the USB 3.2 standard, is provided on the left side of the computer. The USB 3.2 port is compliant with USB 3.2 Gen1 standard and backward compatible with USB 2.0 devices. The port with the icon ( ) has Power Off and Charge function. Note that it is not possible to confirm the operation of all functions of all USB devices that are available.
Figure 3-3 The right side of the computer (PORTEGE Series) 1 1. Smart Card slot* 2. Memory media slot 3. Universal Serial Bus (USB 3.2 Gen1) port 2 3 4 5 4. LAN jack 5. Security lock slot * Provided with some models. Product appearance depends on the model you purchased. Smart Card slot This slot allows you to install a Smart Card device. Some models are equipped with a Smart Card slot. Memory media slot This slot lets you insert a micro SD™/SDHC™/ SDXC™ memory card.
Security lock slot A security cable can be attached to this slot and then connected to a desk or other large object in order to deter theft of the computer. Back (PORTEGE Series) The following figure shows the back of the computer. Figure 3-4 The back of the computer (PORTEGE Series) Underside (PORTEGE Series) The following figures show the underside of the computer. Ensure that the display is closed before the computer is turned over to avoid causing any damage.
Figure 3-6 The front of the computer with the display panel open (PORTEGE Series) 1 2 3 4 5 7 8 6 9 10 13 11 12 1. Infrared LED* 2. Web Camera 3. Web Camera Shutter 4. Web Camera LED 5. Microphones 6. Wireless communication antennas (not shown) 7. Display screen 8. Display hinge 9. Power button 10. Keyboard 11. Touch Pad 12. Touch Pad control buttons 13. Fingerprint sensor* * Provided with some models. Product appearance depends on the model you purchased.
It is highly recommended to use Windows Hello Face indoors. Operating outdoors might cause enrollment/sign-in failure due to the possible sunlight affection. When enrolling your face to Windows Hello, please make sure that there is no other face in preview of Windows Hello setup dialog. While the web camera is capturing your face, make sure that your face is in front of the web camera and you look directly at it.
Display hinge The display hinge allows the display panel to be positioned at a variety of easy-to-view angles. Power button Press this button to turn the computer's power on or off. Keyboard The keyboard contains character keys, control keys, function keys, and special Windows keys, providing all the functionality of a full-size keyboard. Refer to the The Keyboard section for details. Touch Pad The Touch Pad located in the palm rest is used to control the movement of the mouse pointer.
Stereo speakers The speakers emit sound generated by your software as well as audio alarms, such as low battery condition, generated by the system. Left side (TECRA/SATELLITE PRO/dynabook Series) The following figure shows the left side of the computer. Figure 3-8 The left side of the computer (TECRA/SATELLITE PRO/dynabook Series) 1 2 2 3 4 5 1. DC IN 19V jack 2. Thunderbolt™ 4/USB Type-C™ port 3. HDMI™ out port 4. Universal Serial Bus (USB 3.2 Gen1) port 6 7 5. Headphone/Microphone jack 6.
Keep foreign metal objects, such as screws, staples, and paper clips, out of the Thunderbolt™ 4/USB Type-C™ port. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. HDMI™ out port HDMI™ out port can connect with Type A connector HDMI™ cable. Universal Serial Bus (USB 3.2 Gen1) port One Type-A Universal Serial Bus port, which complies to the USB 3.2 standard, is provided on the left side of the computer. The USB 3.
Right side (TECRA/SATELLITE PRO/dynabook Series) The following figure shows the right side of the computer. Figure 3-9 The right side of the computer (TECRA/SATELLITE PRO/dynabook Series) 1 1. Smart Card slot* 2. SIM card slot* 3. Memory media slot 2 3 4 5 6 4. Universal Serial Bus (USB 3.2 Gen1) port 5. LAN jack 6. Security lock slot * Provided with some models. Product appearance depends on the model you purchased. Smart Card slot This slot allows you to install a Smart Card device.
LAN jack This jack lets you connect to a LAN. The adapter has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) or Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T). Refer to Operating Basics, for details. Do not connect any cable other than a LAN cable to the LAN jack. It might cause damage or malfunction.
Figure 3-11 The underside of the computer (TECRA/SATELLITE PRO/dynabook Series) 1 1 2 1 1. Cooling vents 1 2. Memory module cover* * Provided with some models. Product appearance depends on the model you purchased. Cooling vents The cooling vents help the processor to avoid overheating. Do not block the cooling vents. Keep foreign metal objects, such as screws, staples, and paper clips, out of the cooling vents.
Front with the display open (TECRA/SATELLITE PRO/ dynabook Series) This section shows the computer with the display panel open. In order to open the display, lift up the display panel and position it at a comfortable viewing angle for you.
Figure 3-12 The front of the computer with the display panel open (TECRA/ SATELLITE PRO/dynabook Series) 1 2 3 4 5 7 8 6 9 10 13 11 12 14 1 2 3 14 4 5 7 8 6 9 10 13 11 14 1. Infrared LED* 2. Web Camera 3. Web Camera Shutter 4. Web Camera LED 5. Microphones 6. Wireless communication antennas (Wireless LAN) (not shown) 7. Display screen 12 14 8. Display hinge 9. Power button 10. Keyboard 11. Touch Pad 12. Touch Pad control buttons 13. Fingerprint sensor* 14.
Infrared LED The infrared LED blinks when Windows Hello Face is operating. Only models which support face recognition feature are equipped with the infrared LED. Web Camera Web Camera is a device that allows you to record video or take photographs with your computer. You can use it for video chatting or video conferences using a communication tool. The Web Camera available on some models can support face recognition feature for Windows Hello.
Legal Footnote (Wireless LAN) For more information regarding Wireless LAN, refer to the Legal Footnotes section. Display screen 39.6 cm (15.6") or 35.6 cm (14.
Fingerprint sensor This sensor enables you to enroll and sign in with a fingerprint in Windows Hello. For more information, refer to the on-screen instructions in Windows Hello. Some models are equipped with a fingerprint sensor. Internal Hardware Components This section describes the internal hardware components of your computer. The actual specifications might vary depending on the model you purchased. CPU The processor type varies depending on model.
DC IN/Battery indicator Check the DC IN/Battery indicator to determine the status of the battery pack and the power status with the AC adaptor connected. The following indicator conditions should be noted: Flashing Amber The battery charge is low. The AC adaptor must be connected to recharge the battery. Amber Indicates that the AC adaptor is connected and the battery is charging. White Indicates that the AC adaptor is connected and the battery is fully charged.
Chapter 4 Operating Basics This chapter describes the basic operations of your computer, and highlights the precautions that must be taken when using it. Using the Touch Screen Some models are equipped with a touch screen. You can use your finger to manipulate icons, buttons, menu items, the onscreen keyboard, and other items on the touch screen. Tap Simply tap your finger once on the touch screen to activate an item, such as an app.
For details and more advanced touch screen gestures to interact with Windows operating system, refer to Tips in the Start menu. Do not press or push with excessive force on the touch screen. Do not apply excessive force when cleaning the touch screen. Never touch the screen with a sharp object such as a ball-point pen which might scratch or damage the surface. Do not use a protecting sheet for the touch screen as it might decrease its sensitivity to gestures.
Three-Finger Scroll Place three fingers down and slide them vertically or horizontally from anywhere on the Touch Pad. Slide towards left/right: switches between your open apps. Slide your fingers slowly across the Touch Pad to flip through them all. Slide up: views all your open apps in task view. Slide down: shows the desktop. Four-Finger Tap Tap once on the Touch Pad with four fingers together to open the Notification center.
When the CAPS LOCK indicator glows, the keyboard produces capitals when any letter is typed. When the NUM LOCK indicator glows, the ten key allows you to enter numbers. Figure 4-1 Keyboard indicators 1 2 1 1. CAPS LOCK indicator 2. NUM LOCK indicator Product appearance depends on the model you purchased. CAPS LOCK This indicator glows green when letter keys are locked into their uppercase format.
Key Combination Function FN + F3 Switches the system to Sleep Mode. FN + F4 Turns the Microphone mute on or off. FN + F5 Changes the active display device. To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device. User's Manual FN + F6 Decreases the brightness of the display panel in individual steps. FN + F7 Increases the brightness of the display panel in individual steps.
Key Combination Function FN + Z ( Toggles the mode of the keyboard backlight between Timer, On, and Off. ) To set up the brightness, click Start -> All apps -> dynabook Settings. Click Keyboard tab, and select a level under Keyboard Backlight Brightness Control. To set up the timer, launch the dynabook Setup Utility, select Power Management -> Keyboard Backlight Control Mode, and select TIMER. Adjust the timer under Backlight Lighting Time. This function is supported with some models.
Single Sign-On feature Figure 4-2 Using the fingerprint sensor 1 1 1. Fingerprint sensor Product appearance depends on the model you purchased. Fingerprint cannot be used in models that do not have a fingerprint function. Total fingerprints which can be registered are 10 pcs per account. Points to note about the Fingerprint Sensor Be aware of the following considerations when using the fingerprint sensor.
Avoid the following finger conditions for enrollment or recognition as they might result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate: Soaked or swollen finger, for example as might occur after taking a bath Injured finger Wet finger Soiled or oily finger Extremely dry skin condition on finger Observe the following to improve the fingerprint recognition success rate: Enroll two or more fingers.
Care and use of the battery pack This section provides the important safety precautions in order to handle your battery pack properly. Refer to the enclosed Instruction Manual for Safety and Comfort for detailed precautions and handling instructions. Charge the battery pack only in an ambient temperature from 5 through 35 degrees Celsius. Otherwise, the electrolyte solution might leak, battery pack performance might deteriorate, and the battery life might be shortened.
Note that charging time will vary depending on the ambient temperature, the computer's internal temperature, and how the computer is being used. For example, whether the display is set to shut off automatically when idle, whether you make heavy use of external devices powered by the computer, or if the computer's internal storage drive is being accessed frequently by an application.
Wait several seconds to monitor the remaining operating time because the computer needs time to check the remaining capacity of the battery pack and then calculate the remaining operating time, based on this together with the current power consumption. Be aware that the actual remaining operating time might differ slightly from the calculated time. With repeated discharges and recharges, the battery capacity will gradually decrease.
Be aware that the battery pack exhausted time is affected if there are any external devices connected. Extending battery life To maximize the life of your battery pack, do the following at least once a month: 1. 2. 3. 4. 5. Turn off the computer's power. Disconnect the AC adaptor and turn on the computer's power. If it does not turn on, then go to Step 4. Operate the computer on battery power for five minutes.
Points to note about the memory media card microSD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music. For this reason, you cannot copy or play back protected material on another computer or other device, and you cannot reproduce any copyrighted material except for your personal enjoyment. The supported maximum capacity of memory card is 512 GB.
Inserting memory media The following instructions apply to all types of supported media devices. To insert memory media, do the following: 1. 2. 3. Turn the memory media so that the contacts (metal areas) face down. Insert the memory media into the memory media slot on your computer. Press the memory media gently until it clicks into place. Figure 4-4 Inserting memory media 1 2 1. Memory media slot 2. Memory media Product appearance depends on the model you purchased.
If you remove the memory media or turn off the power while the computer is accessing the memory media, you might lose data or damage the media. Do not remove the memory media while the computer is in Sleep or Hibernation Mode. The computer might become unstable or data in the memory media might be lost. Smart Card A Smart Card is a credit card sized plastic card. An extremely thin integrated circuit (IC chip) is embedded into the card on which information can be recorded.
3. After inserting the Smart Card, you should refer to its documentation and also check the configuration in Windows to ensure that it is correct. Additional memory module This section is only applicable for models equipped with the memory module cover. You can install additional memory into the computer in order to increase the amount of system memory that is available. This section describes how to install and remove optional memory modules.
4. 5. Loosen the screw securing the memory module cover in place. Note that the screw is attached to the cover in order to prevent it from being lost. Slide your fingernail or a thin object under the cover and lift it off. Figure 4-5 Removing the memory module cover 2 1 1. Screw 6. 2.
Also ensure that you hold the memory module along its left and right hand edges - the edges with the grooves in. 7. Seat the memory module cover in place and secure it with the screw. Ensure that the memory module cover is firmly closed. Figure 4-7 Seating the memory module cover 2 1 1. Screw 8. 9. 2. Memory module cover Turn your computer over. Connect the AC adaptor and turn on the computer. Make sure that the added memory is recognized.
Do not touch the connectors on the memory module or on the computer. Debris on the connectors might cause memory access problems. Figure 4-8 Removing the memory module 1 1 1. Latches 8. Seat the memory module cover in place and secure it with the screw. Ensure that the memory module cover is firmly closed. 9. Turn your computer over. 10. Connect the AC adaptor and turn the computer on. Wireless WAN device Some models are equipped with the Wireless WAN device.
6. Insert the SIM card tray into the SIM card slot, and push the center of the tray to close it. Press gently until it locks into place. Figure 4-9 Installing the SIM card 4 1 2 3 Nano SIM 1. SIM card slot 2. Slender object (diameter 0.8 mm) 3. SIM card tray 4. SIM card Product appearance depends on the model you purchased. Never allow metal objects, such as screws, staples and paper clips, to enter the computer.
Your current location might not be shown depending on the status of GPS or the location. If you are obtaining your current location information from the computer, your current location might not be detected due to the information accuracy.
Figure 4-10 Connecting the HDMI™ out port 2 1 1. HDMI™ out port 2. HDMI™ cable Product appearance depends on the model you purchased. Do not plug/unplug an HDMI™ device under the following conditions: The system is starting up. The system is shutting down. When you unplug the HDMI™ cable and replug it, wait at least 5 seconds before you replug the HDMI™ cable again.
The link speed (10/100/1000 megabits per second) changes automatically depending on the network conditions (connected device, cable or noise and so on). LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings might cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures.
2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. Figure 4-11 Connecting the LAN cable 1 2 1. LAN jack 2. LAN cable Product appearance depends on the model you purchased. 3. Plug the other end of the cable into a LAN hub connector or router. Check with your LAN administrator and hardware or software vendor before using or configuring a network connection.
Type-C to RGB Adapter This adapter provides: RGB monitor port. Figure 4-12 Type-C to RGB Adapter 1 1. RGB monitor port The output resolution of RGB monitor port on this adapter is up to 2048 x 1280 @60Hz. USB-C™ to HDMI™/VGA Travel Adapter This adapter provides: USB Type-C™ port (Power Delivery Charging), USB 3.0 port, HDMI™ out port, RGB monitor port, and LAN jack. Figure 4-13 USB-C™ to HDMI™/VGA Travel Adapter 1 2 5 3 4 1. LAN jack 2. USB 3.0 port 4. RGB monitor port 5.
2. 3. 4. Plug one end of the RGB cable into the RGB port of the external RGB monitor. Turn the external monitor's power on. Plug the other end of the RGB cable to the RGB monitor port on the USB Type-C™ adapter. There are no fastening screws for an external monitor cable on the RGB monitor port. However, external monitor cables which have connectors with fastening screws can still be used. Figure 4-14 Connecting the RGB cable to the RGB monitor port 1 2 3 4 1. Thunderbolt™ 4/USB Type-C™ port 2.
1. 2. 3. Click Start -> Settings -> Bluetooth & devices -> Add device. Click Wireless display or dock. Your computer starts searching for the wireless display device. After the wireless display device is searched, follow the on-screen instructions to finish connection. After the connection is established, the name of the wireless display device appears under Devices. To disconnect the Wireless display device, click the wireless display device name and then click Remove device.
USB Type-C™ Adapters You can purchase different types of USB TypeC™ adapters as accessories from Dynabook. Please contact your reseller or Dynabook dealer regarding which type is available in your region. Thunderbolt™ 3/ Thunderbolt™ 3/Thunderbolt™ 4 Dock is the Thunderbolt™ 4 Dock docking station that enables you to connect your computer peripherals through one Thunderbolt™ 3/Thunderbolt™ 4 cable to selected Dynabook computers.
3. 4. Select Microphone Array or External Microphone, and click Properties. On the Levels tab, move the Microphone Array or External Microphone slider to increase or decrease the microphone volume level. If you feel the microphone volume level is inadequate while using an external microphone, move the Microphone Boost slider to a higher level.
If the microphones are not built in, you can connect an external microphone instead. Device advanced settings This tab allows you to choose the type of headphone or microphone and select devices when an external device is plugged in. To choose the type of headphone or microphone, do the following: 1. 2. 3. Plug a headphone or microphone into the headphone/microphone jack. Click the Device advanced settings tab. Select one from the device list under ANALOG for the device you plugged into.
Chapter 5 Utilities and Advanced Usage This chapter describes the utilities and special features of this computer, and the advanced usage of some utilities. Utilities and Applications This section describes the pre-installed utilities that come with the computer and details how to start them. For further information on their operation, refer to online manual, help files, or README.TXT file (if applicable) of each utility.
eco Utility This computer is equipped with "eco Mode". This mode slightly lowers performance of some devices to reduce electric power consumption. You can realize measurable power savings by using it continuously. eco Utility helps control the power consumption of your computer. It also provides information that can help you understand your degree of contribution to the preservation of the environment. The utility also supports "Battery Charge Mode".
When the Power Off and Charge function is enabled, USB bus power (DC 5V) is supplied to compatible ports even when the computer is powered OFF. USB bus power (DC 5V) is similarly supplied to the external devices which are connected to the compatible ports. However, some external devices cannot be charged solely by supplying USB bus power (DC 5V). As for the specifications of the external devices, contact the device manufacturer or check the specifications of the external devices thoroughly before use.
Always use the USB cable that was included with your USB device. Function under Battery Mode This option can be used to enable/disable Power Off and Charge under battery mode. It also displays the remaining battery capacity. Move the slider to enable or disable this function. Enabled Enables Power Off and Charge function under battery mode. Disabled Enables Power Off and Charge function only when the AC adaptor is connected.
USB port without "Power Off and Charge function" or disable both “System ON CDP Charge Mode” and “Power Off and Charge function”. System Password The System Password tab allows you to set a password in order to restrict access to the computer. Two levels of password security are provided: User and Supervisor. Passwords set by the System Password function are different from the Windows password. User Password To set a user password, click Start -> All apps -> dynabook Settings -> System Password.
Owner String (text box) You can use this box to associate text with the password. After you enter text, click Apply. When the computer is started, this text is displayed together with the prompt asking you to enter a password. If you forget your HDD User Password, Dynabook will NOT be able to assist you, and your HDD will be rendered COMPLETELY and PERMANENTLY INOPERABLE.
some features that can power on the computer automatically (Wake-up on LAN, Task Scheduler, etc.) might not work. You must turn the computer back on to retry password entry.
To access this utility, click Start -> All apps -> dynabook Screen Rotation Utility. The following options might be provided: Screen Rotation—Rotate the screen orientation by using the Ctrl + Alt + Up arrow/Down arrow keys. Confirmation message—Show a confirmation message when the screen is rotated. External display message—Show a message when the screen did not rotate because an external display is connected.
To maintain a stable experience of the camera effects during video conferences, it is recommended you connect to a stable network, plug in the AC adaptor, close any other applications that are not in use and do not enable all camera effects at the same time to save CPU resource. Camera effects are intended for online meeting use. Please turn off the camera effects if they do not work as expected in other applications. Please turn off all camera effects before you uninstall the utility.
If you select the deletion method and continue with the operation, you will lose all data (including the operating system and recovery partition) on the internal storage drives. Make sure that you have already created recovery media if you want to use the computer after erasing your hard disk drive(s). Special features The following features are either unique to Dynabook computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures.
Panel power on/off *1 This feature automatically turns power to the computer off when the display panel is closed, and turns it back on when the display panel is opened. This can be specified in the Power Options. Low battery When battery power is exhausted to the point automatic Hibernation that computer operation cannot be continued, the system automatically enters Hibernation Mode Mode *1 and shuts itself down. This can be specified in the Power Options.
Chapter 6 Troubleshooting Dynabook has designed this computer for durability, however, should problems occur, you are able to use the procedures detailed in this chapter to help determine the cause. You should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place. Problem-solving process If you observe the following guidelines, resolving problems will be much easier.
Check all cables to ensure that they are correctly and firmly attached to the computer - loose cables can cause signal errors. Inspect all connecting cables for loose wires and all connectors for loose pins. Check that your disc media is correctly loaded. Always try to make detailed notes of your observations and keep them in a permanent error log - this helps you to describe your problems to Technical Support. In addition, if a problem recurs, the log you have made helps to identify the problem faster.
Hardware If you cannot find a software problem, you should then check the setup and configuration of your hardware. First run through the items in the preliminary checklist as described previously, then, if you still cannot correct the problem, try to identify the source. The next section provides checklists for individual components and peripherals.
Verify that the computer is on by looking at the Power indicator. If the indicator is glowing, the computer is on. Also, try turning the computer off and then on. If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the DC IN/Battery indicator. If the indicator is glowing, the computer is connected to a live external power source.
Overheating power down If the processor's temperature reaches an unacceptably high level with either setting, the computer automatically shuts down to prevent any damage. In this instance, all unsaved data in memory is lost. Problem Procedure Computer shuts down automatically Leave the computer off until it reaches room temperature. If the computer has reached room temperature and it still does not start, or if it starts but shuts down quickly, contact Technical Support.
Problem Procedure Battery does not power the computer as long as expected If you frequently recharge a partially charged battery, the battery might not charge to its full potential. In these instances, you should fully discharge the battery and then attempt to charge it again. Real-Time Clock Problem Procedure BIOS setting and The lasting time of the Real-Time Clock (RTC) has system date/time are run out.
Problem Procedure Output to screen is garbled Refer to your software documentation to ensure that it is not remapping the keyboard in any way (remapping involves changing or reassigning the function of each key). If you are still unable to use the keyboard, you should contact Technical Support. Internal display panel Apparent problems of the computer's display panel might be related to setup and configuration of the computer.
Problem Procedure Slow performance The files on the internal storage drive might be fragmented. In this instance you should run the disk defragmentation utility to check the condition of your files and the internal storage drive. Refer to the operating system's documentation or online help file for further information on operating and using the defragmentation utility. As a last resort, you should reformat the internal storage drive and then reload the operating system and all other files and data.
Problem Procedure Mouse pointer does not respond to pointing device operation In this instance, the system might be busy. Try moving the mouse again after waiting a short while. Double-tapping (Touch Pad) does not work In this instance, you should initially try changing the double-click speed setting within the Mouse Control utility. 1. 2. 3. To access this utility, click Start -> Settings -> Bluetooth & devices -> Touchpad -> More touchpad settings.
Problem Procedure Double-clicking does In this instance, you should initially try changing not work the double-click speed setting within the Mouse Control utility. 1. 2. 3. To access this utility, click Start -> Settings -> Bluetooth & devices -> Touchpad -> More touchpad settings. Within the Mouse Properties window, click the Buttons tab. Set the double-click speed as required and click OK.
Fingerprint sensor Problem Procedure Fingerprints cannot be registered or deleted 1. 2. 3. 4. 5. 6. 7. Save your work. Click Start -> (Power) and then select Restart. Hold down the F2 key and then release this key just after the computer is powered on to show the dynabook Setup Utility. Select Security -> BIOS Password -> Supervisor, and then register the Supervisor Password. (If the User Password has been registered, clear it first.) Select Clear Fingerprint data, and then press Yes.
Problem Procedure Power Off and Charge function cannot be used Power Off and Charge function might be disabled. Enable the Power Off and Charge function under USB Charge within the dynabook Settings. When there is a current overflow of the external device connected to the compatible port, USB power (DC 5V) supply might be stopped for safety reasons. When this happens, disconnect an external device if some external devices are connected.
Problem Procedure "USB Wake-up function" does not work When "System ON CDP Charge Mode" or "Power Off and Charge function" is enabled, the "USB Wake-up" function does not work for ports that support the Power Off and Charge function. In that case, use a USB port that does not have the Power Off and Charge function or change to disable both "System ON CDP Charge Mode" and "Power Off and Charge function".
Problem Procedure Monitor does not turn on After confirming that the monitor's power switch is on, check the connections to make sure that the power cord/adaptor is firmly connected to the monitor and to a working power outlet. No display Try adjusting the contrast and brightness controls on the external monitor. Press the function key in order to change the display priority and ensure that it is not set for the internal display only. Check to see if the external monitor is connected.
LAN Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN hub. Wake-up on LAN does not work Make sure the AC adaptor is connected. The Wake-up on LAN function consumes power even when the system is off. If problems persist, consult your LAN administrator. Wireless LAN Problem Procedure Cannot access Wireless LAN Make sure that the wireless communication function of the computer is on. If problems persist, contact your LAN administrator.
Technical support If you require any additional help using your computer or if you are having problems operating the computer, you might need to contact us for additional technical assistance. Before you call Some problems you experience might be related to software or the operating system, so it is important that you investigate other sources of assistance first.
Chapter 7 Appendix Specifications This section summarizes the technical specifications of the computer. Physical Dimensions The physical dimensions vary depending on the model you purchased. Size Approximately 323.6 (w) x 220.6 (d) x 17.9 (h) millimeters Approximately 323.6 (w) x 220.6 (d) x 18.9 (h) millimeters Approximately 323.6 (w) x 220.6 (d) x 19.9 (h) millimeters Approximately 358.2 (w) x 236.9 (d) x 19.
Power Requirements AC adaptor 100-240V AC 50 Hz or 60 Hz (cycles per second) Computer 5-20V DC AC Power Cord and Connectors The AC input plug of the power cord must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Wire size: Minimum 0.75 mm2 Current rating: Minimum 2.5 amperes Certification agencies China: CQC U.S.
For the United States and Canada, two-pin plug configuration must be 2-15P (250 V) or 1-15P (125 V) and three-pin plug configuration must be 6-15P (250 V) or 5-15P (125 V) as designated in the U.S. National Electrical Code Handbook and the Canadian Electrical Code Part II. The following illustrations show the plug shapes for the U.S.A. and Canada, the United Kingdom, Australia, Europe, Middle-East, Africa, South Africa, Switzerland, Italy and China.
Information for Wireless Devices Wireless Technology Interoperability The Wireless LAN is compatible with other LAN systems with Direct Sequence Spread Spectrum (DSSS) /Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/n/ac/ax), as defined and approved by the Institute of Electrical and Electronics Engineers.
In some situations or environments, the use of wireless products might be restricted by the proprietor of the building or responsible representatives of the organization. These situations might for example include: Using the wireless products equipment on board of airplanes, or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.
Card Specifications Compatibility IEEE 802.11 Standard for Wireless LANs Network Operating System Microsoft Windows Networking Media Access Protocol CSMA/CA (Collision Avoidance) with Acknowledgment (ACK) Radio Characteristics Radio Characteristics of Wireless LAN module might vary according to: Country/region where the product was purchased Type of product Wireless communication is often subject to local radio regulations.
Bluetooth® provides a safe and trustworthy wireless personal area network environment that is quick and easy. You cannot use the built-in Bluetooth® functions of the computer and an external Bluetooth® adaptor simultaneously. For reference, Bluetooth® wireless technology has the following features: Security Two advanced security mechanisms ensure a high level of security: Authentication prevents access to critical data and makes it impossible to falsify the origin of a message.
Russian Federation: Limited Using SRD (Short Range Device) with implementation FHSS (Frequency-Hopping Spread Spectrum) modulation. 1. 2. 3. Maximum 2.5 mW (4 dBm) EIRP (Equivalent Isotropically Radiated Power) is permitted to use.
Using SRD with DSSS (Direct Sequence Spread Spectrum) and other than FHSS wideband modulation. 1. 2. 3. Maximum EIRP density is 2 mW/ MHz. Maximum 100 mW (20 dBm) EIRP is permitted to use. Maximum EIRP density is 20 mW/MHz. Maximum 100 mW (20 dBm) EIRP is permitted to use with the following condition: It is permitted to use SRD for outdoor applications only for purposes of gathering telemetry information for automated monitoring and resources accounting systems or security systems.
Restrictions for Use of 5150 - 5350 MHz Frequencies in Europe Austria, Limited Belgium, implementation Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Great Britain and Northern Ireland, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden This product is for indoor use only.
SAR Value 0.83 W/kg (10 g) (TECRA A40-K) 0.27 W/kg (10 g) (TECRA A50-K) Maximum Power Output (2400 - 2483.5 MHz) IEEE 802.11 b/g/n/ax mode / Bluetooth Maximum 100 mW (20 dBm) EIRP (2400 - 2483.5 MHz) BLE Maximum 10 mW (10 dBm) EIRP (5150 - 5725 MHz) IEEE 802.11 a/ n/ac/ax mode Maximum 200 mW (23 dBm) EIRP (5745 - 5875 MHz) IEEE 802.11 a/ n/ac/ax mode Maximum 25 mW (13.98 dBm) EIRP (5945 - 6425 MHz) IEEE 802.11 ax mode Maximum 200 mW (23 dBm) EIRP The low band 5.15 - 5.
Band 1 2100 MHz Tx: 1,920–1,980 MHz +23 dBm ± 2 dB Rx: 2,110–2,170 MHz Band 3 1800 MHz Tx: 1,710–1,785 MHz +23 dBm ± 2 dB Rx: 1,805–1,880 MHz Band 7 2600 MHz Tx: 2,500–2,570 MHz +22 dBm ± 2 dB Rx: 2,620–2,690 MHz Band 28 700 MHz Tx: 703–748 MHz +23 dBm ± 2 dB Rx: 758–803 MHz WCDMA frequency band support Band 1 WCDMA 2100 Tx: 1,920–1,980 MHz +24 dBm +1/-3 dB Rx: 2,110–2,170 MHz Band 8 WCDMA 900 Tx: 880–915 MHz +23 dBm ± 1 dB Rx: 925–960 MHz To remain in conformance with European spectr
priorité) pour les bandes 5.25-5.35 GHz et 5.65-5.85 GHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. The term “IC” before the equipment certification number only signifies that the ISED technical specifications were met. USA - Federal Communications Commission (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
1. Important notice The frequency bandwidth of this equipment may operate within the same range as industrial devices, scientific devices, medical devices, microwave ovens, licensed radio stations and non-licensed specified low-power radio stations for mobile object identification systems (RFID) used in factory production lines (Other Radio Stations). 1. 2. 3. Before using this equipment, ensure that it does not interfere with any of the equipment listed above.
4. About the JEITA 5 GHz Wireless LAN supports W52/W53/W56 Channel. /ax /ax Device Authorization This device obtains the Technical Regulation Conformity Certification and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Telecommunications Business Law of Japan. Intel® Wi-Fi® 6E AX211 The Name of the radio equipment: AX211NGW DSP Research, Inc.
To disable the AMT function, do the following: 1. 2. 3. Turn on the computer while pressing the F2 key. On the dynabook Setup Utility screen, select MEBx -> Intel(R) ME Password, and enter the default password “admin” in the password field. Enter a new password. Password must comply with the following requirements concerning character types and length: Must be between 8 and 32 characters long. Must contain at least one number (“0”, “1-9”). Must contain a mix of lower-case (“a”, “b”, “z”, etc.
When using the computer with the AC adaptor connected and the AMT function set to enabled, power might still be supplied to the system memory even when the computer power is turned off, or the computer is in Sleep Mode or Hibernation Mode. When connecting the AC adaptor, the computer is powered and can be turned on. If the power is automatically turned off after approximately 5 to 7 seconds, it is because the RTC lasting time runs out and the settings of AMT function have been cleared.
Accessibility Accessibility options provided by Windows 11 operating system are accessible through Accessibility features of Windows settings. It allows you to customize your Dynabook notebook the way you want to use it. To see the available features in one of the following ways: Go to Start and select Settings ( ). Using a keyboard, press the ( Windows key ) + I, scroll up to the word Settings, then press Enter. Then select Accessibility from the Settings screen.
Hearing Audio: For those with hearing difficulties, this option makes it easier to hear with features like Hear all sounds in one channel, and Display audio alerts visually. Captions: Lets you read the word spoken in the audio portion of a video, TV show or movie that supports Closed Caption technology. You can select the settings you want and see how they appear in preview. Click here for more information about making your device easier to hear or use with these visual alternatives to sound.
Touch Screen: Some notebook configurations have touch screen capability, refer to Using the Touch Screen section for more information. Touch Pad: The Touch Pad on the palm rest supports several features, refer to Using the Touch Pad section for more information. Keyboard: The number of keys available on your keyboard depends on which region your computer is configured for, with keyboards being available for numerous languages.
Utilities and Advanced Usage: Your computer comes with preinstalled utilities such as dynabook Settings, eco Utility USB Charging, Power Off and Charge, System ON CDP Charge, System Password, User Password, Supervisor Password, Pre-Boot Authentication, dynabook Service Station, dynabook Setup Utility, and dynabook Maintenance Utility. Refer to Utilities and Advanced Usage section for more information. You might have all the software listed depending on the model you purchased.
use of computer in areas with low air pressure (high altitude >1,000 meters or >3,280 feet above sea level) use of computer at temperatures outside the range of 5°C to 30°C (41 -86°F) or >25°C (77°F) at high altitude (all temperature references are approximate and might vary depending on the specific computer model - contact Technical Support for details). CPU performance might also vary from specifications due to design configuration.
Internal Storage Drive Capacity 1 Gigabyte (GB) means 109 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 230 = 1,073,741,824 bytes, and therefore shows less storage capacity. Available storage capacity will also be less if the product includes one or more pre-installed operating systems, such as Microsoft Operating System and/or pre-installed software applications, or media content.
Index A External monitor problems 6-14 AC adaptor additional 4-27 connecting 2-3 H Hard disk drive automatic power off 5-10 B Battery extending life 4-12 monitoring capacity 4-10 real time clock 4-8 save mode 5-10 K Keyboard function keys 4-4 function keys F1...
Memory media slot 4-12 microSD/SDHC/SDXC card note 4-13 Moving the computer 1-19 P R Recovery hard disk drive 2-16 Recovery Media 2-15 S SD/SDHC/SDXC card formatting 4-13 Password power on 5-10 Starting the computer by password 5-6 Supervisor 5-6 User 5-5 Security lock 4-27 SIM card installing 4-19 removing 4-20 Power Hibernation Mode 2-12 panel on/off 5-11 Shut Down mode 2-10 Sleep Mode 2-10 turning off 2-10 turning on 2-7 Problems AC power 6-5 Analyzing the problem 6-2 Battery 6-5 Dual Pointing devi
W Web Camera 3-6, 3-16 Wireless communication 7-5 User's Manual Index-3
