User Manual

EU Declaration of Conformity
This product is carrying the CE mark in accordance
with the related European Directives. Responsible
for CE marking is Dynabook Europe GmbH,
Stresemannallee 4b, 41460 Neuss, Germany. The
complete and official EU Declaration of Conformity
can be found on the web site
https://emea.dynabook.com/product-conformity.
CE compliance
Hereby, Dynabook Europe GmbH declares that the model(s) described in
this manual is/are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: https://emea.dynabook.com/product-conformity.
This product is labeled with the CE mark in accordance with the essential
requirements and other relevant provisions of the applicable European
Directives, notably Radio Equipment Directive (2014/53/EU), RoHS
Directive 2011/65/EU, Ecodesign Directive 2009/125/EC (ErP) and the
related implementing measures.
This product and the original accessories are designed to observe the
applicable EMC (Electromagnetic Compatibility) standards. However,
Dynabook cannot guarantee that this product still observes these EMC
standards if accessories or cables not produced by Dynabook are
connected or implemented. In this case the persons who have connected/
implemented those accessories/cables have to provide assurance that the
system (PC plus options/cables) still fulfils the required standards. To avoid
in general EMC problems, the following guidance should be noted:
Only CE marked accessories should be connected/implemented
Only best shielded cables should be connected
Working environment
This product was designed to fulfil the EMC (Electromagnetic Compatibility)
requirements to be observed for so-called “Residential, commercial and
light industry environments”. Dynabook do not recommend the use of this
product in working environments other than the above listed working
environment.
For example, the following environments are not verified:
Industrial Environments (e.g. environments where a mains voltage of
380 V three-phase is used)
Medical Environments (according to Medical Device Directive)
Automotive Environments
Aircraft Environments
User's Manual
1-4