Owner`s manual

A 112A | A 115A | A 118A

trols of the mixing console input channel to their cen-

ter position. Adjust the input channel’s ‘Gain‘ control

so that the Peak LED should not light at all or blink

only once in a while.

7. Slowly raise channel fader and master faders on the

mixing console to the desired positions – i.e. volume

settings.

8. Your system is now ready for operation. Individual

sound adjustments necessary can be made using the

controls of the mixer’s corresponding input chan-

nels.

9. Now have fun with your A 112A system!

10. After use, first switch off the A 112A and then the

mixing console, so that distracting power-off noise

will not occur. When using a DYNACORD CMS mixer,

no power-off noise will be output from the ‘Master

Outputs‘. This allows switching off the mixer first

without a problem.