PowerMate3 PowerMate 1000-3 / 1600-3 / 2200-3 POWERED MIXER Quickstart
POWERMATE 3 Setting-up the PowerMate fast and trouble-free START-UP 1 2 1 3 2 PREPARATIONS 1. 2. 3. 4. Make sure that all rotary controls are set to their center (12 o’clock) position. Make sure that all faders in the bottom area of the console are set to their minimum position. Make sure that all the smaller faders of the graphic EQ (top right) are set to their center position. Use the power lead provided to connect the PowerMate to a mains socket. SETTING UP THE LOUDSPEAKERS 5. 6. 7.
POWERMATE 3 or vocals. When picking up vocals or instruments with a full tonal character they are not necessarily needed. Once you have completed these initial steps your PA system should now be fully functional, providing good quality sound without needing to adjust any other controls. BEST PRACTICES FOR BETTER SOUND 20. If the sound does not meet your expectations, it may be because of the quality of the loudspeakers or the microphones that are incorporated.
DYNACORD 12000 Portland Avenue South, Burnsville, MN 55337, USA Phone: +1 952/844-4051, Fax: +1 952/884-0043 www.dynacord.com © Bosch Communications Systems Europe, Africa, and Middle East only. For customer orders, contact Customer Service at: +49 9421-706 0 Fax: +49 9421-706 265 Asia & Pacific only.
