PowerSub 112 | 212 POWERED SUBWOOFER Owner‘s Manual | Bedienungsanleitung
PS 112 | 212 2
PS 112 | 212 CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Scope of Delivery, Unpacking and Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PS 112 | 212 IMPORTANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated ”dangerous voltage” within the product’s enclosure that may be of sufficent magnitude to constitute a risk of electric shock to persons.
D 8A 1 Introduction The DYNACORD PowerSub 112 and 212 powered subwoofers are perfectly suited for building multi-component active loudspeaker systems, e.g. an active 3-way system using powered fullrange speakers like the DYNACORD D 8A or the DYNACORD D 11A. Due to its vented design this subwoofers offers much more musical, tight and punchy bass than typical bandpass designs often found in this type of product range. the only person who can claim damages in transit.
PS 112 | 212 2 Installation 2.
PS 112 | 212 Number PS 112 1 PS 212 Power on/off indicator (POWER) 2 Mains switch (ON / OFF) 3 Mains connector, lockable (MAINS IN) 4 Limit indicator (LIMIT) 5 Volume control (VOLUME) 6 Polarity indicator (180°) 7 Polarity switch (PHASE) 8 Output connector (XLR) for mid/hi audio signal (MID/HIGH OUT) Output connectors (XLR) for left or right mid/hi audio signal (MID/HIGH OUT L or MID/HIGH OUT R) 9 Input connector (XLR or phone) for line level audio signal (LINE IN) Input connectors (XL
PS 112 | 212 2.2 Quick Start CAUTION: After installing the system, first switch on the mixing console and position the mixer’s master faders to their minimum settings. That followed, switch on the PowerSub and use the master faders to adjust the desired volume setting. Otherwise, high sound levels caused by unintentional playback of a program source could be the result, which might cause hearing damage.
PS 112 | 212 9
PS 112 | 212 WICHTIGE SICHERHEITSHINWEISE Das Blitzsymbol innerhalb eines gleichseitigen Dreiecks soll den Anwender auf nicht isolierte Leitungen und Kontakte im Geräteinneren hinweisen, an denen hohe Spannungen anliegen, die im Fall einer Berührung zu lebensgefährlichen Stromschlägen führen können. Das Ausrufezeichen innerhalb eines gleichseitigen Dreiecks soll den Anwender auf wichtige Bedienungs- sowie Servicehinweise in der zum Gerät gehörenden Literatur aufmerksam machen. 1. 2. 3. 4. 5. 6. 7. 8. 9.
PS 112 | 212 1 Einführung Die DYNACORD PowerSubs 112 und 212 sind aktive Subwoofer zum Aufbau von Aktiv-Mehrweg-Konfigurationen, z. B. Aktiv-3-Weg Systeme mit den aktiven Fullrange-Kabinetten DYNACORD D 8A und DYNACORD D 11A. Das ventilierte Design lässt diese aktiven Subwoofer sehr musikalisch, straff und voluminös klingen, ganz im Gegensatz zu in dieser Produktklasse verbreiteten Bandpass-Lösungen. PowerSub 112 Der PowerSub 112 ist eine ideale Basserweiterung für aktive Fullrange-Kabinette wie z. B.
PS 112 | 212 2 Installation 2.
PS 112 | 212 Nummer Beschreibung PS 112 Beschreibung PS 212 1 Anzeige Betrieb (POWER) 2 Netzschalter (ON / OFF) 3 Netzeingang, verriegelnd (MAINS IN) 4 Anzeige Limiter (LIMIT) 5 Volume-Regler (VOLUME) 6 Polaritätsanzeige (180°) 7 Polaritätswahlschalter (PHASE) 8 Ausgang (XLR) für MItten- und Hochton-Signal (MID/HIGH OUT) Linker bzw. rechter Ausgang (XLR) für MItten- und Hochton-Signal (MID/ HIGH OUT L bzw.
PS 112 | 212 10 AUSGANG FÜR AUDIO-SIGNAL (LINE THRU) Die XLR-Buchse LINE THRU dient zum „Weiterschleifen“ des LINE INSignals zu weiteren Geräten und liegt direkt parallel zu der entsprechenden Eingangsbuchse. Dies ermöglicht eine einfache Verkabelung von einem Gerät zum nächsten. Der Pegel des Signals hängt nicht von der Stellung des Eingangspegel-Regler VOLUME („Pre Fader“) ab. 2.
PS 112 | 212 3 Specifications Property PS 112 PS 212 Order No. F01U161502 (D113317) F01U161503 (D113318) Cabinet Powered Subwoofer 1 x 12“ Powered Subwoofer 2 x 12“ Maximum Amplifier Output Capability 400 Watts 800 Watts Amplifier Power RMS 200 Watts 400 Watts Max. SPL 1 m / calc.
PS 112 | 212 PS 212 Line In Mid/High Out R Class-D Amplifier R X-Over 120 Hz EVS12SB L/R Line Thru 0° Volume 180° Signal Processing Class-D Amplifier EVS12SB Mid/High Out L Line In L Power MAINS1-L Line Thru Mains 100V...120V 220V...240V 50Hz...60Hz MAINS1-E MAINS1-N 3.
PS 112 | 212 3.
PS 112 | 212 3.
PS 112 | 212 D-LITE ACTIVETWO D-LITE ACTIVEFOUR 19
DYNACORD 12000 Portland Avenue South, Burnsville, MN 55337, USA Phone: +1 952/844-4051, Fax: +1 952/884-0043 www.dynacord.com © Bosch Communications Systems Part Number F01U141835 Vs 01 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at: +49 9421-706 0 Fax: +49 9421-706 265 Asia & Pacific only.