Owner manual

REQUIRED ITEMS

❏ 2-3 channel radio with 2-3 micro or

mini servos

❏ Top Flite

MonoKote

covering

(approx. 3 rolls)

❏ 1/4" Latex Foam Rubber (HCAQ1000)

OPTIONAL

❏ Remote tow hook release

❏ Paint for fuselage

SUGGESTED SUPPLIES

❏ 2 oz. Thin CA Adhesive - (GPMR6003)

❏ 1 oz. Thick CA Adhesive - (GPMR6015)

❏ CA Accelerator - (GPMR6035)

❏ CA Applicator Tips - (HCAR3780)

❏ 6-Minute Epoxy - (GPMR6045)

❏ 30-Minute Epoxy - (GPMR6047)

❏ 4 oz. Aliphatic Resin Glue (TITR2010)

On our workbench, we have four 11" Easy-Touch

™

Bar Sanders, equipped with #50, #80, #150 and

#220-grit sandpaper. This setup is all that is required

for almost any sanding task. Custom sanding blocks

can be made from balsa for sanding hard-to-reach

spots. We also keep some #320-grit wet-or-dry

sandpaper handy for finish sanding before covering.

IMPORTANT BUILDING NOTE:

During construction

you will be using a number of balsa sticks to frame

various assemblies. Ample material is included but

you should study the plans, then make an effort to cut

the longest pieces you will need first. Label the pieces

as you cut them for later reference. By doing this

now, you won’t have to splice pieces together later.