User manual

15 of 30
2.4 Installing USB Driver for use with Dynagen GSC300 USB interface.
This section will explain how to install the USB drivers. You do not need to plug the
programmer into the GSC300 at this point.
DO NOT connect the programmer into the GSC300 when it is powered. This may
corrupt the GSC300.
2.4.1 For Windows XP
See next section for Windows Vista and 7.
1. Connect the USB programmer to a USB port on your computer.
2. The New Hardware Found Wizard window
should open.
3. You will be prompted to allow windows to check online for drivers. Check the
check box that says no not this time. This window may not appear, go to step 4.
4. Leave option checked for update
automatically and click Next.