User manual

20 of 30
3.2 Starting the Configurator program
1. Click Start, Programs, DynaGen Technologies, and then Configurator.
2. If there is a message stating that there was a problem with the parallel port, the
user may have to choose the port address manually (see section 4.2.6 Set Port
Address button feature on page 9).
3. You will now see the Configurator main screen window.
4. One feature to note is that both USB and Parallel port can be used to
program the GSC300. I f you choose to use USB use the read and store
buttons under the USB heading. If you choose to use the parallel port, use
the buttons under the heading parallel port. When using USB, you will see
background operations happening during the read and store processes.
This is normal and to be expected.