Manual

16
Downloading logged values to PC using LogReader software
The hardware connection from the Catalyst Monitor to a PC is via a USB cable assembly,
Dynalco p/n 270A-13020. The 6 ft cable length allows easy connection via a 4 pin Phoenix
plug to the lower connector (terminals 5, 6, 7, 8) on the back of the Catalyst Monitor. When
initially plugging the download cable into the PC’s USB port, the new device should be
recognized and the driver installed automatically.
Please call [phone] if the driver is not installed properly or assistance is required.
The Dynalco host software “LogReader” is available as a free download from our website:
www.dynalco.com/downloads
There are (2) versions available:
LogReader Ver. 1 Use for Version 1 Catalyst Monitors
LogReader ver. 2 Use for Version 2 Catalyst Monitors
Following installation, you may click on the icon to open the application. This software will
allow date selectable log values to be downloaded to an excel spread sheet on the PC.