Manual

Operating Instructions SWT-2000 DYNALCO

6.8.2 Changing the Password

Go to <Settings>, <Change Config user password> or <Change Process user password>.

Changing the password involves entering the old password and the new password twice. To save the

password click on <OK>.

The password is now stored in the configuration software.

To change it in the SWT-2000 the data must be downloaded.

A Configuration user may change the Process user password by entering the Configuration user password

first. Factory set passwords:

Config User:

1981

Process User

1977

Attention: If the password has been changed, there is no way of returning to a factory setup. If the password

is forgotten, the SWT-2000 will need to be returned to Dynalco to be reset.

6.9 Info

To gain information about the SWT-2000 or to enter a Process name <Info>, <Info about>.

An individual Process name may be entered into the text field to the right of <Process ID>, max. 16

characters. (Only alphanumeric characters).

Type: Tachometer type number

Java version: Java Version stored in the Tachometer

Firmware: SWT-2000 Firmware Version

Serial Nr: SWT-2000’s serial no.

Cal. Date: Calibration date

TCP/IP Address: SWT-2000’s IP Address

JRE Version: PC’s JAVA Runtime