User Guide

DynalinkXDL-WRX36 | User Guide
97
Computer is disconnected from the router.
Your computer might have lost the connection to the router due to interference, system updates, or any number of reasons. If your
computer is still not connected, try to disconnect and establish the connection to the router’s WiFi again and make sure the WiFi
password is correct. Or use an Ethernet cable to connect to the router’s LAN port directly. Follow the steps in 4. Configure your
Router for more help.
Can’t connect the device to the WiFi network.
The WiFi signal strength is an influential Factor that affects the connection stability between your devices and router. Try to use the
following solutions to improve the WiFi connection quality:
‐ Move your devices closer to the router to boost WiFi signal. On the other side, you may avoid placing the router close to household
appliances that may cause interference on your 802.11 wireless network, e.g. microwave ovens, radio transmitters, cellular
transmitters, or wireless devices operate at 2.4GHz/5GHz that emit electromagnetic waves. Also, some types of barrier will weaken
WiFi signal, such as metal, bulletproof glass, concrete, plaster, marble, brick objects and appliances.
‐ When you start to use Dynalink APP, the step-by-step instruction direct you to complete router setup including establishing WiFi
connection between your mobile and router. For your convenience, Dynalink APP allows you to scan the QR code located at the
bottom of Router to establishing WiFi connection without entering password. However, if the default SSID has been modified, you
will need to operate manually instead.
‐ Try to avoid using special characters when you configure wireless network name and password. It is suggested to use a combination
of only English letters and numbers.
How to update the operating system to the latest firmware version?
Launch a browser and log in to the web user interface. Navigate to System Settings > Firmware and see the configuration settings
of Upgrade from Internet. Use the Check button to inspect the latest firmware version. An information prompt will help you to check
if the router needs to be upgraded or not. Then click the Update button and proceed to firmware update process. This will cause the