User Guide

DynalinkXDL-WRX36 | User Guide
33
1. Select the radio button to enable/disable port trigger.
2. Click Add Rule. Enter the parameters in accordance with your requirements.
3. Click Add to have the rule created on port triggering list and then click Save to apply your changes. You can remove or edit any
port trigger rule by using the editing and deleting icons.
Note: The maximum number on port triggering list is 32 rules.
Well-known
Applications
Select an well-known application from the dropdown
menu to set up the corresponding settings
automatically.
Description
Name the rule according to your requirement.
Trigger port
Define the port number or the port range for triggering
the incoming ports.
Local IP list
Select the IP address in the dropdown menu which
automatically detected by your router.
Local IP
Enter the IP address of the device connecting to your
router.
Protocol
Select TCP or UDP in the dropdown menu.
Incoming port
Define the port number or the port range to be open
while detecting port triggered event.
Protocol
Select the TCP or UDP in the dropdown menu.