User Guide

DynalinkXDL-WRX36 | User Guide
35
1. Click Add Rule. Enter the parameters in accordance with your requirements to set up a port forwarding rule.
2. Click Add to have the rule created on port forwarding list and then click Save to apply your changes. You can remove or edit
any port forwarding rule by using the editing and deleting icons.
Note: The maximum number on port forwarding list is 32 rules
Well Known Server
List
Select a well-known service from the dropdown menu to set up
the corresponding settings automatically.
Well Known Game
List
Select a well-known game from the dropdown menu to set up
the corresponding settings automatically.
Services
Specify the name of the service e.g. HTTP, POP3 etc.
Port Range
Define the number or a range of external ports.
Local IP List
Select the IP address in the dropdown menu which
automatically detected by your router.
Local IP
Enter the IP address of the device connecting to your router.
Local Port
Define the number or a range of internal ports.
Protocol
Select TCP, UDP or BOTH in the dropdown menu.
Status
Configure the default status of this rule.