User Guide

DynalinkXDL-WRX36 | User Guide
48
Radio
Frequency
Select 2.4GHz or 5GHz.
Schedule
Wireless Schedule
Schedule a period of time you would like the WiFi to be enable or disable.
Setting
Enable Radio
Enable or disable this WiFi radio.
Wireless Mode
2.4GHz: Select the wireless mode used for the router’s WiFi. Include g, g/n, n, ax/n/g/b.
5GHz: Select the wireless mode used for the router’s WiFi. Include a, n/a, ac, ac/n/a, ax/ac/n/a.
Channel Bandwidth
Set the channel bandwidth: 20MHz (lower performance but less interference), 40MHz (better performance but
likely more interference), or Auto (automatically select based on interference level).
Control Channel
Select a wireless radio channel or use the default “Auto” setting from the drop-down menu. Changing radio
channel can improve WiFi signal depending on how crowded the channel is with other radio signals and
interference.
Tx Power Adjustment
Tx Power adjustment refers to the milliWatts (mW) needed to power the radio signal output of the wireless route.
It could be 25%, 50%, 75%, or 100%.