Setup guide

Default Configuration

This router is shipped with the following factory default settings depending on

your region.

Router IP address 192.168.1.1

Subnet mask 255.255.255.0

VPI/VCI 8/35 (Australia)

0/100 (New Zealand)

Connect mode PPPoE LLC/SNAP (Australia)

PPPoA VC-MUX (New Zealand)

NAT enabled

DSL line mode ADSL2+ (Australia)

G.DMT (New Zealand)

WAN IP dynamic

DHCP enabled

DNS relay on

UPnP IGD enabled

Firewall

Incoming requests blocked

Outgoing traffic not blocked

Configuration & management:

User name admin

Password admin

Telnet password admin

Wireless Settings (not applicable to model RTA1320):

Wireless Channel 11

Wireless security disabled

VoIP settings (RTA1046VW only):

Default SIP port TCP 5060

Default CODEC Auto switching (G.711, G.726, G.729)