Setup guide

7
Voice over IP
Model RTA1046VW only
VoIP (Voice over IP) is a voice service provided over the internet by some service
providers. It allows users to talk without using a conventional telephone service
and often provides lower call costs.
A full description on this topic is found on Chapter 4: Web Configuration > Voice
over IP on page 117 of the User Manual.
7.1 CONNECTING THE HARDWARE
1. Connect a telephone handset to Phone1 port.
2. Connect the PSTN port to the Phone port of your microfilter/splitter.
3. Connect the DSL port to the Modem port of your microfilter/splitter.
4. Plug the microfilter into the telephone wall outlet.
Note:
A: Handsets are not provided. Any standard telephone handsets may be used.
B: Microfilters/splitters can be purchased separately. To use your VoIP Service without a microfilter/
splitter, connect the DSL port directly to the telephone wall outlet. However, with this configuration
you cannot use the RTA1046VW for PSTN calls (conventional telephone service).