User manual

Before You Use
xi
³ Supports 802.1Q VLAN packet pass-through
Routing Features
³ NAT (Network Address Translation) / PAT (Port Address Translation) let
multiple users on the LAN to access the Internet for the cost of only one IP
address.
³ ALGs (Application Level Gateways): such as NetMeeting, MSN Messenger,
FTP, Quick Time, mIRC, Real Player, CuSeeMe, VPN pass-through
with
multiple sessions, RTSP, SIP, etc.
³ Port Forwarding: the users can setup multiple virtual servers (e.g., Web, FTP,
Mail servers) on user’s local network.
³ Support DMZ
³ UPnP IGD (Internet Gateway Device) with NAT traversal capability
³ Static routes, RFC1058 RIPv1, RFC1723 RIPv2
³ DNS Relay, Dynamic DNS
³ DHCP Client/Relay/Server
³ Time protocol can be used to get current time from network time server
³ Support IGMP Proxy
³ Support port mapping function which allows you to assign all data traffic
transmitted among specific Internet connections and LAN ports
³ Support IP/Bridge QoS for prioritize the transmission of different traffic classes
³ Support 802.1Q VLAN Tagging
Security Features
³ PAP (RFC1334), CHAP (RFC1994), and MS-CHAP/MS-CHAP2 for PPP
session
³ Firewall support IP packets filtering based on IP address/Port number/Protocol
type
³ Bridge packet filtering
(optional)
³ URL filtering (optional)
³ Support DoS (Deny of Services) which detect & protect a number of attacks
(such as SYN/FIN/RST Flood, Smurf, WinNuke, Echo Scan, Xmas Tree Scan,
etc)
Configuration and Management
³ User-friendly embedded web configuration interface with password protection
³ Remote management accesses control
³ Telnet/SSH session for local or remote management
³ Firmware upgrades through HTTP, TFTP or FTP
³ The boot loader contains very simple web page to allow the users to update
the run-time firmware image.
³ Configuration file backup and restore
³ SNMPv1/v2 agent with MIB-II, ADSL Line MIB