User`s manual

Chapter 3: Configuration
7. Under the General tab, enable
Use the following IP Address. Enter
the IP address: 192.168.1.x (x is
between 2 and 254), Subnet Mask:
255.255.255.0 and Default gateway:
192.168.1.1. Then click OK.
For Windows XP
8. From the Start menu, point to
Control Panel and then click Network
and Internet Connections.
9. Click Network Connection and
then click Properties.
10. Click Network Connection and
then click Properties.3. On the
General tab, check out the list of
installed network components.
Option 1: If you have no TCP/IP
Protocol, click Install.
Option 2: If you have TCP/IP Protocol,
go to Step 6.
11. Highlight Protocol and then
click Add.
12. Click Internet
Protocol(TCP/IP) and then click OK.
13. On the Local Area Connection
Properties window, highlight Internet
Protocol (TCP/IP) and then click
Properties.
15