User`s manual

ADSL Router User Manual
Quick Start
The pages for the Quick Start provide user a quick way to set for the router. If you do not know more
about the router, you can use the Quick Start pages to adjust basic settings to make your router
activating.
Connect to Internet
This is a quick way to connect to Internet by
using PPPoE interface simply, please click
Connect to Internet to open the web page.
Enter the user name and password (that you
get form the ISP) for your ADSL router and
click Connect.
The system will connect automatically, then
you can access Internet.
Quick Setup
The quick setup wizard will guide you to
configure the DSL router through some
specific steps. Yet different connection
interface will lead in different setting pages.
Refer to the following pages for detailed
information.
Auto Scan Internet Connection (PVC):
The default setting is checked. If there is no
any PVC configured in your ADSL router,
you can check this item. Otherwise, please
uncheck this box.
VPI (Virtual Path Identifier): Identifies the
virtual path between endpoints in an ATM
network. The valid range is from 0 to 255.
To enter the setting, please refer to the
setting that the ISP gave you.
VCI (Virtual Channel Identifier):
Identifies the virtual channel endpoints in an
ATM network. The valid range is from 32 to
65535 (1 to 31 is reserved for well-known
protocols). To enter the setting, please refer
to the setting that the ISP gave you.
After finished entering the VPI/VCI value,
please click Next for next step
38