User's Manual

76
always make sure that the phone is switched
off.
Installing the SIM card
Insert the SIM cards into their respective slots.
Make sure that the contact area on the cards is facing
the connectors on the device.
Access codes
There are access codes for your SIM card. These
codes help you to protect the phone against
unauthorized use.
When requested for any of the code explained
below, key-in the appropriate code (displayed as
asterisks) and press the OK key.
PIN
The Personal Identification Number or PIN (4-
8digits) protects your SIM card against unauthorized
use. The PIN comes with the SIM card; see the SIM
card instruction provided with your card.
If you enter an incorrect PIN three times in
succession, the code will be disabled and cannot be
used until you re-enable it by entering the PUK.
PUK
The 8-digit PUK (Personal Unblocking Key) is
required to change a disabled PIN. The PUK may be
supplied with the SIM card. If not, or in case you have
lost it, please contact your service provider.
To re-enable your PIN, proceed as follows.
1. Key-in the PUK and press the OK key.
2. Enter a new PIN of your choice and press the
OK key.
3. When the Confirm New PIN message is
displayed, key-in the same code again and press
the OK key.
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid. Please
contact your service provider for a new card.
Insert memory card
Insert memory card. Take compatible micro SD
card, and place it into its
slot.
Earphone
Connect the micro USB connector on the cable into
its designated port on the device (top).
Standby mode
In the main display, you may see several icons
displayed on your status bar. The meaning for each
icon is explained below: