User's Manual

11
3. Call Function
After the setup described in the previous sections is completed, you are ready to make and receive calls using the basic information provided in this section.
Note:
¾ When you are using headset, please plug/unplug the headset gently to avoid damaging the headset jack.
3.1. Phone power on/off
Power on
Press and hold Power Key to turn on the phone. If PIN code is required, please refer to the previous section in this guide.
Power off
In Standby mode, press Power Key to turn off the phone.
3.2. Dial
When the network carrier is shown on the screen, your phone has entered the Standby mode and you may make or receive calls. If you have installed two SIM
cards, the two network carriers will both appear on the screen.
3.2.1. Direct dial
Press any number key to enter the Dial screen.
Domestic call
Using the stylus, press the number keys and then press the Send key to make the phone call.
Note:
¾ In single card mode, Send key will dial out to the one card.
¾ In dual card mode, Send key will dial out with respect to card 1 and card 2.
¾ You may also use actual keypad for entering the phone number.
The screen will show the name and phone number of the person that you are calling. After the call goes through, the screen will show a time meter in addition
to the phone number and/or the name of the person you are calling.
International call
Key in the symbol “+” by Press-and-hold * key, followed by the desired country code and the phone number. For example, to make a call to China, Press and
hold * key until “+” appears then enter “86” (the country code for China) and the phone number.
3.2.2. Dial from the Phonebook
Enter Phonebook from the Main Menu. You may use alphabet for quick search of the names.