User's Manual

-29-
contact the network. A moment later, the network will make a response and send the operation results to
the mobile phone.
 Line switching: Switch to Line 1 or Line 2. By default, Line 1 is used.
Note: If you choose Line 2, dialing may fail. This depends on the implementation of the network operator.
Advanced setup
 Blacklist: He or she can’t call you if you add his or her number to blacklist.
 Auto redial: Set it to On or Off to enable or disable auto redial. If you set Auto redial to On, the mobile
phone will automatically redial the number a moment later if the called party does not reply. The number
of auto redial times can be set to a maximum of 10. In the auto redial period, you cannot dial other
numbers. To end the auto redial process, press the End key.
Note: This function requires support from the network operator to which the SIM card is registered.
 IP dial: Set IP dial related parameters.
 Call time display: To display call time or not in a call.
 Call time reminder: To set single or circle tone in a call to make you know the time.
 Auto quick end: this function enables you to end a call at a preset time.
 Reject by SMS: Reject an incoming call and reply the caller a short message.
 Connect notice: Once this function is enabled, the phone would vibrate to remind you when a call is
connected.
 Answer mode: Set answer mode as per your need.
Network Settings
Contact the network operator to obtain the following network services: