User's Manual

24
PUK/PUK2 is provided by the network operator.
If the PUK is input wrongly in successively 10 times. The SIM card will be locked and discarded
permanently.
 SIM1 /SIM2 security
 PIN lock: open or close the PIN lock function. When PIN lock is launched, the PIN shall be input
upon each power-on.
 Change PIN: you can change the PIN.
 Change PIN2: you can change the PIN2.
 Phone lock: turn on/off the phone lock. When phone lock is enabled, power on to enter phone
password. The preset password is: 1234. You can change the password.
 Change password: you can change password you want to change, (the default password is
1234). .
10.5 Connectivity
Data account
Enter in GSM account list; select an entry to edit its contents:
 Edit: select an entry to edit its contents
 Account name: edit the name of the account.
 APN: edit the accessed APN.
 User name: the user’s name accessing to APN server.
 Password: edit the access password to APN server.
 Auth.type: select one of certification modes used by the WAP identity certificate.
 SIM selection: select the SIM card.
 Advanced settings: Set up homepage, connection type, use proxy, proxy address,prixy
port,prixy user name, proxy password, primary DNS, secondary DNS, IP address, subnet mask.
 Add PS account: Add one more data account.
 Delete: Delete the data account.
 Change default: Change the default data account.
10.6 Restore factory settings
Recover the setting of the phone into the initial values with this function.
11. User profiles
You can set up the personalized ringtones for incoming calls and phone-pertinent prompt tone etc under
the different scenes with this function.
Press <Menu> under the standby mode and then select User Profile Mode if you desire to enter in the
function.
Enter in the function; display the profile mode list including General, Meeting ,
Outdoor ,Indoor,Headset.