GSM Mobile Phone User Manual Trade name:Ice Mobile Model name:ROCK BOLD FCC ID:C89ROCKBOLD 1
1. REMOVAL OF SIM CARD ................................................................................................... 4 2. REMOVE OF THE MEMORY CARD.................................................................................. 4 3. REMOVAL OF THE BATTERY ........................................................................................... 4 4. BATTERY CHARGING .........................................................................................................
5. DIALING.................................................................................................................................. 4 6. INPUT METHODS ................................................................................................................. 5 7. GUIDE TO MENU OPERATIONS ....................................................................................... 6 8. SAFETY PRECAUTIONS .........................................................................................
1. Removal of SIM card Turn off the phone; remove the battery and unplug other external power sources. When you need to remove the SIM card, please first turn off the phone, remove the battery, then remove the SIM card 2. Remove of the Memory Card Turn off the phone; remove the battery and unplug other external power sources. When you need to remove the Memory card, please first turn off the phone, remove the battery, then remove the Memory card. 3.
6. Area code phone number dial key Making International calls For making international calls you should press the * key to switch, until the international phone prefix “+” appears on the screen. This will allow you to make an international call in any country regardless of what the international call prefix is.
Key board values Generally the Left soft Key or OK key indicates confirmation; the right soft key is to return or eliminate. Navigation keys (up/down and left/right keys): Generally used to move the cursor or candidate characters for inputting. # key: to switch between different input methods. Number keys from 2 to 9: in the Intelligent English input modes, indicate the letters on the corresponding key. * key: to show the sign interface. 7.
Delete all To delete call log for SIM card 1/2. Call times Record some recent calls, to wait some time and can be cleared to zero GPRS counter Record some recent calls, the phone to electricity and some other traffic and can be cleared to zero 7.2 Multimedia Camera To take pictures at anytime or place by a vivid camera and then save them on your memory card DV Video or place at any time by a vivid camera and then stored in your memory card Image To view the saved image.
Video To play the recorded movie.. KingMovie Play some SMV format video files Sokoban Snake Tetris 7.3 contacts You can add new contact and do some operations in the phonebook,including View, Send text message, Send multimedia message, Call, , Edit, Delete, Copy, Move, Send business card, Add to Call Blacklist, Mark several, Phonebook settings. 7.
7.3(2)Groups You can set the group, the contact on relationship between different groups, respectively, is convenient quickly find the corresponding contact person . 7.4 Profiles Activation and customize the required profile is Normall, silent, meeting, indoor, outdoor, Earphone, bluetooth's style. 7.5 Message Chat mode The information session interface between the same number Write Message To create a new Message. Inbox To view the received Message. Outbox .
Drafts . To view the saved Message to send Sentbox To view the sent messages. Templates . To view or edit template of MMS to create Broadcast message . To receive public messages on all different subjects from your network operator Voice mail server Can set up a single number, email, date and number Message settings To perform the setting related to message. 7.6 Tools Calculator To provide a calculator with 4 basic functions to facilitate simple calculations.
World clock To use the world clock function. Timer Set up time, time will have ring tone hint Unit conversion Weight and the length of the conversion between the units STK Your phone supports STK (SIM TOOL KIT) function for SIM1/2. Bluetooth This mobile phone support Bluetooth wireless connection. You can establish wireless connection between mobile phone and device to realize voice communication, data exchange and synchronization.
and setting and restore factory Settings. Display Perform related Settings shown as switch motor drawing, wall paper, standby interface, according to some of the protective screen, backlight and the backlight time, key backlight time setting Security Settings Execute related the SIM1/2 security, mobile security, automatic keyboard lock, and end keys locked fast, anti-theft tracking and fixed dialing, blacklist and whitelist privacy protection..
Do not switch on your phone when phone use is prohibited or when phone use may cause interference or danger. Do not use your phone while driving. Follow the rules or regulations in hospitals and health care facilities. Switch off your phone near medical apparatus. Switch off your phone in an aircraft. The phone may cause interference to control signals of the aircraft. Switch off your phone near high-precision electronic devices. The phone may affect the performance of these devices.
Keep your phone and its accessories away from children. Do not allow children to use your phone without guidance. Use approved batteries and chargers only to avoid explosion. 9. Cleaning and Maintenance The mobile phone, battery and charger are not water resistant. Please do not use them in the bathroom or other excessively moist areas and likewise avoid allowing them to get wet in the rain. Use a soft, dry cloth to clean the mobile phone, battery and charger.
Model Nominal voltage Nominal Capacity rating Continuous standby time Continuous calling time Operation Temperature 11. GT-4C 3.7v 4.2v 800mAh 250-400hrs 3-5hrs * Depending on the network * -10~+50 °C Trouble shooting If anything unusual occurs while using your mobile phone, please refer to the following table. Frequently Occurring Problems Poor reception Cause Using the mobile phone in an area with poor reception such as near tall buildings or in a basement where radio waves cannot be transmitted.
Related to the distance from the base station built by the network. Echo or noise Shortening of the standby time Caused by poor network relay, a regional problem. Some calling regions have poor lines. Standby time is related to the network system. Batteries need to be replaced Unable to turn on the phone When you cannot get a signal, the phone will continue to transmit in order to find a base station, thereby expending large amounts of electricity will cause the standby time to decrease.
SIM card malfunction SIM card is damaged. SIM card is not properly inserted. There is a foreign substance on the metal surface of the SIM card. Expired SIM card Unable to connect with the network Outside the GSM service area Poor signal. Unable to make a call Using the call bar function Using the fixed dialling function. Incorrect PIN number Unable to charge Consecutively enter the wrong password three times. Battery or charger is damaged 17 Contact your network service provider.
recharging in the environment of less than -10℃or higher than 45℃. Poor contact Unable to add new phone book entries Unable to set certain functions The storage space of the phone book is full Your network provider does not support this function or you have not applied for it. Change the charging environment. Check if the plug is properly connected Delete a portion of the phone number entries Contact your network provider.
near the equipment and shall be easily accessible.
This marking indicates that this product should not be disposed with other household wastes throughout the EU.
responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.
environmental safe recycling. The plug portion of the AC/DC adaptor is used as disconnect device.
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
requirements, a minimum separation distance of 0.5cm must be maintained between the user's body and the back of the phone, including the antenna, whether extended or retracted. Third-party belt-clips, holsters and similar accessories containing metallic components shall not be used. Body-worn accessories that cannot maintain 0.
(1992) / (1986) / (1996) Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard (C95.1).
up and over your shoulder. TIPS ON EFFICIENT OPERATION: For your phone to operate most efficiently: • Extend your antenna fully. • Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.
the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.