Dynamics Hong Kong Limited Brand Name: ICE MOBILE Model No: SOL FCC ID: ZGRSOL GSM Mobile Phone User Manual
Thank you for choosing this mobile phone. For a better use of the phone, please read the manual carefully. This color-screen phone is designed for use on the GSM/GPRS network. The phone supports dual-card online at the same time, you remove the two phones at the same time bring the trouble to truly enjoy a life of science and technology.
Contents CHAPTER 1 SAFETY INFORMATION ··································································· 4 1.1 GENERAL PRECAUTIONS ········································· 4 1.2 BATTERY PRECAUTIONS ········································· 5 1.3 CHARGER PRECAUTIONS ········································· 7 CHAPTER 2 PHONE INTRODUCTION ··································································· 9 2.1 2.2 2.3 2.4 2.
3.10 EXTRA ··························································· 40 3.11 SERVICES ······················································· 42 3.
Chapter 1 Safety Information 1.1 General Precautions Please turn off your phone in an airplane, hospital or areas where the phone may disturb the operation of sensitive or medical equipment. Please use your phone in accordance with the rules of the areas.
or cause electric leakage or other problems. Do not use needle, stylus or pointed objects to press the keys; otherwise the phone may break down and malfunction. Prevent the phone from nearing magnetic objects such as magnetic cards, credit cards, floppy disks. The radio wave of the phone may erase the information stored on them. Do not expose the phone to humidity, water or other liquid; otherwise the phone may break down. To prevent traffic accident, do not use the phone when driving.
fire may occur. Do not dismantle or refit the battery or weld the contact points otherwise leakage, excessive heat, burst and fire may occur. The liquid leaked from the battery may cause blind if entering into the human eyes. In this case, please wash the eyes with clean water immediately (do not rub the eyes) and go to hospital as soon as possible. Do not use and put the phone near areas of high temperature such as fire or heaters; otherwise leakage, excessive heat, burst and fire may occur.
Do not charge the batter over 24 hours on end. The battery life is limited and will be reduced after long and frequent charging. If it doesn’t work after several charging, it indicates the end of its life. You need to replace it with new battery of specified model. Do not dispose of the battery with domestic garbage; instead you should dispose of it in line with the regulations. 1.
Do not use the charger in places of high humidity such as bathroom; otherwise electric leakage, fire and other problems to the charger. Do not touch the charger, power cord or power socket with a wet hand; otherwise electric shock may occur. Do not put heavy objects upon the power cord or refit it. Otherwise electric shock or fire may occur. Disconnect the charger with electric power during cleaning and maintenance.
Chapter 2 Phone Introduction 2.1 Specification The host machine: Model No. Size (length x width x thickness) Weight Lithium Cell Model No. Nominal voltage Charge limited voltage Rated capacity Perpetual standby time Call duration time Traveling charge Model No. Input 2.2 SIM Card Before you use your phone, you must insert your SIM card. It’s your key to enter into the GSM network. All the information related to the connection to the network and logs of calls is recorded in the metal area of the SIM card.
You can also take the SIM card out and put it into another GSM mobile phone. (The new phone will read the SIM card automatically) To prevent the loss and damage of information stored on the SIM card, the metal area of the SIM card should not be touched and the card should be kept away from electrical and magnetic area. Once the SIM card is damaged, you are unable to enter into the GSM network.
Insert the TF card into the TF slot. When the TF card needs to be taken out, turn the phone off and take the TF card out of the slot. 2.3 Battery 50% of the battery power is charged initially and can be used after unpacking. The new battery needs to be charged for at least 14 hours. After the power is used up (with no power to turn the phone on) for the first time, charge the battery fully. For the second time, charge the battery fully again after the power is used up.
*Note:Don’t take up the battery when the battery is charging. Insert the connector of the charger into the port on the right side of the phone. The battery symbol appeared at the top right corner indicates the state of charging. If the phone is turn off during charging, a charging indication picture will be shown instead signifying that charging is in progress. If the phone is in low battery and being used overly, it may take a while for the charging icon to appear on the screen after charging is started.
time will be shortened. - The standby time and talk time provided by the manufacturer is calculated in the ideal environment. The actual time may vary with the network condition, working condition and running mode. - Make sure that the battery is well installed and can not be removed during charging. - When charging is complete, disconnect the charger from the phone and electric power.
2.5 Power on/off the phone Press and hold the End Key to turn the phone on or off. If the phone is turned on without a SIM card, the message of “inserting the SIM card” will be shown. The SIM card will be checked out after being inserted. Then the following information will be shown on the screen: Enter PIN1 (if you have set a password for the SIM card), Enter password of the mobile phone (if you have set a password for unlocking the phone).
Chapter 3 Menu Details 3.1 File Manager ¾ Functions: Open: display the contents of the folder. Create: create a new archive under the current folder. Format: format the folder. Rename: rename the files or folders. Delete: delete the files or folders. Sort: sort the files or folders. Details: check the details of the files or folders. Copy: copy the files or folders to any position. Move: move the files or folders to any position.
3.2 Phonebook ¾ Quick Search: enter into the browse screen of the phonebook. You can enter corresponding information in the searching column below to sort the entries out. Modes of searching include: 1. English (lower case); 3. Number. Press the # Key to switch among input methods.
*Note: They are different from each other in terms of storage format ¾ Phonebook settings - Preferred storage: choose the preferred storage location, the phone or the SIM card. - Speed dial：In standby, press and hold corresponding numeric keys to dial the number set for them. - My number: edit and save the detailed information of the user. - Extra Numbers: Other numbers such as the caller ID, service number and urgency number stored on the SIM card.
3.3 Fun & Games ¾ Magic Sushi： - Start game: start a new game. - Game level: select the game level. - Best grades: record the player’s playing record. - Help: get to see the game rules. ¾ Game settings - Audio: turn on/off the background music - Vibration: turn on/off the Vibration 3.4 Call center Call history the manus as follows : ¾ Missed Calls: to take the record of the missed calls. ¾ Dialed Calls: to take the record of the dialed calls.
- Delete all：Delete all the record - Delete: delete the entry. - Save to phonebook: save the entry in the SIM card or the phone. - Add to blacklist: Add the entry to blacklist. - Edit before call: edit the entry and add it into the phonebook. ¾ Delete call logs: The user can choose to clear all the entries of a list. ¾ Call times: Four sub-menus are provided in Call Duration: Last Call, Dialed Calls, Received Calls and Clear All. Last Call: check the duration of the last call.
2、Call Diversion: Unconditional: divert incoming calls to another number unconditionally. If Out of Reach: divert incoming calls to another number if you cannot be reached. If Not Answered: divert incoming calls to another number after you phone rings for a specified time without answering. If Busy: divert incoming calls to another number when you have an active call. All Data Calls: divert data calls. Cancel Diversion: cancel the diversion of calls.
the list would be rejected to be connected. ¾ White list：you can edit the phone number in the restricted call lista and choose to turn on or off the function. If set on, any number would be rejected to be connected besides the phone number in the list.
- Text format: define the text editing format. - Insert number: add numbers from the phonebook. - Insert name: add names from the phonebook - Input method: change the input method. *Note: some of the cities and district message centers do not support message over than 70 characters (or 160 English texts). ¾ Inbox： Check the received messages. When the Inbox message list appears, press Ok to read the message.
- Move All: move all the messages from SIM card to the phone or from the phone to SIM card. - Use Number: dial or store in the phonebook the number extracted from the message. - Use USSD: Use the ussd number in the message. ¾ Outbox: Check the un-sent messages. When checking the Outbox message list, press Confirm to read the message.
- Use USSD: Use the ussd number in the message. Multimedia Message Multimedia messages contain text, picture and sound.Through MMS (Multimedia Messaging Service), you can not only send or receive pictures and texts, but also receive audio files attached to messages. The phone supports multimedia messages with multiple pages, i.e. each page consists of one picture, one piece of music and text. A multimedia message contains several such pages.
Forward: forward the multimedia message to others. Receive: if the multimedia message is not received, receive it. Disconnect：Disconnect with GPRS. Delete: delete the multimedia message. Delete All: delete all the multimedia messages in the inbox. ¾ Outbox: store the multimedia messages sent unsuccessfully. ¾ Drafts: store the multimedia message not intended to send. ¾ Setting: set the parameters of sending and receiving the multimedia message.
- Memory: space of the saved multimedia messages, used memory and free memory. Voice Mailbox Functions of the voice mailbox are as follows: ¾ Edit: you can set the name and phone number. ¾ Connect to the Voice Mailbox: dial the voice mailbox you set to listen to the voice message. Cell Broadcast Functions of receiving and reading the messages of cell broadcast are as follows: ¾ Receiving Mode: open or close the receiving of cell broadcast message.
- State Mode: activate Reports or Reply Path. - Memory status: check the available space in SIM card or mobile message box. - Save location: choose to save in mobile or SIM card. - Transfer Setting: select the message transfer mode, GPRS preferred, GSM preferred, GPRS only or GSM only *Note: This function requires the support of the network supplier. 3.6 Multimedia TV Player TV function. Use manual or automatic search to obtain the channel.
- Brightness：Adjust the brightness of television。 - Signal strength display：open or close the signal strength display. - Weak signal display：open or closed Weak signal display. Camera The phone is equipped with a camera. Enter into Camera and press ok to start photo taking. Options are as follows: ¾ photos: enter into Album. ¾ Camera Settings: set the relevant parameters of photo taking ¾ Image Settings: set the size and quality of photos. ¾ White Balance: set the color of the light.
on/off film. ¾ Rename: rename the selected picture. ¾ Delete: delete the selected picture. ¾ Delete All files: delete all the pictures in the album. ¾ Sort by: sort the pictures of the selected folder by name, type, date or size. ¾ Storage: change or choose a default storage path for the pictures Video recorder The phone is equipped with a film recorder. Enter into Film Recorder and press ok to start film recording.
¾ Send: Send the selected file by multimedia message. ¾ Rename: rename the selected file. ¾ Delete: delete the selected file. ¾ Delete All files: delete all the files. ¾ Sort by: arrange the files in terms of name, type, date, size or none). ¾ Storage: check the location of the file (in the phone and the memory card). Audio player Select Music Player to enter into the mp3 Player. Press the Left Soft Key to enter into Playlist and play the songs by scrolling searching.
Random: play randomly. - Background playing: playing will not stop when exiting the menu. - Audio effect: Set the sound effect of audio player. Sound Recorder Choose to record. Press left soft key to do the operations: ¾ Record: record a new sound ¾ Play: play the selected recorder ¾ Append:: add new recorder to the original recorder.
Enter into the sub-menus of Calendar. ¾ Calendar: create a new event and add an alarm clock to it by Once, Daily, User-defined, Weekly, and Monthly. Once: the event will warn only once. Daily: the event will warn at the specified time every day. User-Defined: the event will warn at a time of the week defined by the user. Weekly: the event will warn at the specified time every week. - Monthly: the event will warn at the specified time every month.
3. User-Defined: set the warning time of the alarm clock in a week. 4. Weekly: warn only once in a week. 5. Monthly: warn only once in a month. ¾ Browse: check the stored entries. ¾ Add: add a new entry ¾ Edit: edit the stored entries. ¾ Delete: delete a selected entry. ¾ Delete All: delete all the entries. ¾ Transfer: transfer the selected entry to another phone by messaging, or store it in the archives of the phone. Alarm ¾ On/Off: open or close the alarm clock.
1 min to every 10 min and default. ¾ Ring method: the option ring tones are ring, vibration, vibration and ring. World clock Use direction key to read each city’s time zone and the date and time in each city. 3.8 Setting Dual SIM switch Selet with SIM status Use default mode Dual SIM settings Dual SIM open:open the dual SIM Only SIM1 open:only open the SIM1 Only SIM2 open:only open the SIM2 Flight mode:close the network,open flight. Pen calibration You can use touchscreen to re-calibration.
- Time Format: set the display format of time. ¾ Schedule power on/off: set the time when the phone is turned on and off automatically. ¾ Language: set the language for the menu ¾ Preferred Input Method: select a default input method. ¾ Display characteristic: - Wallpaper: select the wallpaper for standby. - Screen saver: select a screen saving picture for standby and set the waiting time. - Power on dispaly: select the film played when the phone is turned on.
- LCD Backlight：set mobile LCD backlight brightness and time. Network settings ¾ Network Selection: Automatic: search automatically for the network to which the SIM card belongs to. Manual: search for all available networks and register manually. ¾ Preferred Network: pre-store your preferred networks Security settings ¾ SIM security setup 1、SIM1 Lock: You can make the security settings to prevent your phone or SIM card from unapproved use.
network supplier. The default PIN code is 1234; please change it into your personalized password. 2、 Fixed Dial: If activated, only the numbers set in the list or numbers started with the digits in the list can be made. (Require the support of SIM card.) Mode: open or close the function of Fixed Calls. (Need to input PIN2 code.) - Fixed Calls List: input the fixed phone numbers into the list. *Note: Open or close the function of Fixed Calls requires the input of PIN2 code.
password next time it is turned on; press again to deactivate the protection. Use the Right Soft Key to clear a wrong input when entering the password and press OK to confirm. For example, if the password is set as 1122, enter: 1122. *Note: The default password of the phone lock is 1122; please change it into your personalized password.
Dance Classical High pitch Banquet Pop Rock 3.9 User Profiles General ¾ Activate: activate the general profile ¾ Customize: Enter into individual settings of the general profile. Functions as follows: - Ring Tone settings: change the ring tone for incoming calls, alarm clock, phone on/off, phone sliding, message and keypad tone. - Ring volume: adjust the volume of ring tone and keypad tone. - Ring Type: ring, vibration, vibration and ring, ring after vibration.
Outdoor The same as the general profile. My style The same as the general profile. 3.10 Extra Calculator ¾ Press the key 0-9 for the input of numbers and the # key for that of the decimal point. ¾ Press the key up, down, left and right for the input of the mathematical symbol of +、–、x、÷. ¾ Press the Right Soft Key to clear the last entry. Press the Right Soft Key to “Exit” calculator; and press the Left Soft Key to “Get” the result. *Note: the precision of the calculator is limited.
¾ Activate: open or close Bluetooth. ¾ Search for hands-Free Device: search for the current Bluetooth hands-free devices. ¾ My device: the list of devices being connected. ¾ Device in Connection: devices being connected. ¾ Settings: include the settings, such as searchable setting, file transfer setting ¾ My Bluetooth: check the status of the Bluetooth.
*Note:1.By using the Bluetooth technology, the phone can get in connection with devices compatible with Bluetooth within 10 meters. However, the connection may be affected by barriers like wall or other electronic devices. 2.The use of Bluetooth may accelerate the consumption of battery power and shorten the battery life. It is advisable to turn Bluetooth off when not needed. 3.
¾ Enter Address: enter any WAP website or other internet websites. ¾ Setting: make the setting of websites browsing. - Edit Setting Profile: select the Setting Profile among the 10 options provided. - Browsing Properties: parameter settings of browsing websites, including standby time and picture display. - Service Message: open or close service message. - Clear Buffer Memory: clear the buffer memory. Clear Personal Information: clear your personal information.
- Service Inbox: check the service inbox for messages. - Settings: enter into the setting menu. - Exit: exit the WAP explorer and back to the main menu. *Note: GPRS service requires the support of the network and is only available after the service is put into operation. Data account ¾ GPRS： Name: the name of the account. You can edit it. - GPRS Connect Node: enter APN. User’s Account: the account number of dialing server (not WAP gateway).
¾ Auto Searcher:Can auto search channel. The signal channel will be saved to the list of channels. You can choice of channel. ¾ Channel list: saver the obtained TV channel into the list. ¾ Earphone mode: choose earphone mode to play TV. ¾ display settings - Brightness：Adjust the brightness of television。 - Signal strength display：open or close the signal strength display. - Weak signal display：open or closed Weak signal display.
Chapter 4 Trouble shooting Settings of certain function Such functions are not supported by the network supplier or you haven’t applied for them. fail PIN locked Enter the password and PUK code supplied with the SIM card or contact the network supplier. PIN2 locked Enter the password and PUK2 code supplied with the SIM card or contact the network supplier. Call meter The data transfer counter doesn’t work; please invalid contact your network supplier. SIM card errors 1.
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC ZGRCOM adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
RF Exposure Information: FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the body with the minimum separation distance of 1.5cm is 0.886W/kg, next to the head is 0.711W/kg. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules.
