User Manual

10
LI** (LI-PO/LI-FE/LI-ION) LITHIUM DISCHARGING
1. Connect the banana plugs of the battery adapter cable to the charge port.
Confi rm the positive and negative connectors match, red to red (positive to
positive) and black to black (negative to negative).
2. Connect the Balance Port to the Balance Circuit Adapter Board.
3. Connect the battery connector to the battery adapter cable.
4. Connect the balance connector of the battery to the Balance Adapter Board.
5. Press the Batt / PROG Stop button to access the root menu. Press the
DEC or INC button to scroll through the main menu screens until you
reach Program Select=Li-Po/Li-Ion/Li-Fe.
6. Press the ENTER / Start Button.
7. Press the DEC or INC Button until Li-Po/Li-Ion/Li-Fe DCHG appears.
8. Press the ENTER / Start Button to edit the parameter.
9. Once the parameters are at the desired settings, press and hold the ENTER / Start
Button for 3 seconds. Press ENTER / Start again to confi rm and start the discharge.
10. The charger will check the battery and charger settings and discharging will begin.
11. Press the DEC or INC Button to see the rest of the Discharging information.
12. Press Batt / PROG Stop at any time to stop discharging.
13. When discharging is complete, the charger will sound a series of beeps.
14. Disconnect the battery from the charger when the discharge is complete.
LI** (LI-PO/LI-FE/LI-ION) LITHIUM STORAGE CHARGING
1. Connect the banana plugs of the battery adapter cable to the charge port.
Confi rm the positive and negative connectors match, red to red (positive to
positive) and black to black (negative to negative).
2. Connect the Balance Adapter Board to the Balance Port of the charge port.
3. Connect the battery connector to the battery adapter cable.
4. Connect the balance connector of the battery to the balance adapter.
5. Press the Batt / PROG Stop button to access the root menu. Press the DEC
or INC button to scroll through the main menu screens until you reach
Program Select=Li-Po/Li-Ion/Li-Fe.
6. Press the ENTER / Start Button.
7. Press the DEC or INC Button until Li-Po/Li-Ion/Li-Fe STORAGE appears.
8. Press the ENTER / Start Button to edit the parameter. The Parameter will
begin fl ashing.
9. Press the DEC or INC Button to change the value of the parameter. Press
the ENTER / Start Button again to move to the next parameter.
10. Once the parameters are at the desired settings, press and hold the ENTER / Start
Button for 3 seconds. Press ENTER / Start again to confi rm and start the process.
11. The charger will check the battery and charger settings and storage
charging will begin.
12. Press the DEC or INC Button to see the rest of the storage charging information.
13. Press Batt / PROG Stop at any time to stop charging.
14. When the storage process is complete, the charger will sound a series of beeps.
15. Disconnect the battery from the charger when the storage process is complete.
Li** STORAGE
2.0A 14.8V (4S)
Li** DCHG 3.0V
1.0A 9.0V(3S)