User Manual

13
PB DISCHARGING
PB CHARGING
1. Connect the banana plugs of the battery adapter cable to the charge port.
Confi rm the positive and negative connectors match, red to red (positive to
positive) and black to black (negative to negative).
2. Connect the battery connector to the battery adapter cable.
3. Press the Batt / PROG Stop button to access the root menu. Press the
DEC or INC button to scroll through the main menu screens until you reach
Program Select=Pb BATT.
4. Press the ENTER / Start button.
5. Press the DEC or INC Button until Pb DISCHARGE appears.
6. Press the ENTER / Start Button to edit the parameter. The Parameter will
begin fl ashing.
7. Press the DEC or INC Button to change the value of the parameter. Press
the ENTER / Start Button again to move to the next parameter.
8. Once the parameters are at the desired settings, press and hold the ENTER /
Start button for 3 seconds.
9. The charger will check the battery and charger settings and discharging will
begin.
10. Press the DEC or INC Button to see the rest of the Discharging information.
11. Press Batt / PROG Stop at any time to stop discharging.
12. When discharging is complete, the charger will sound a series of beeps.
13. Disconnect the battery from the charger when the discharge is complete.
1. Connect the banana plugs of the battery adapter cable to the charge port.
Confi rm the positive and negative connectors match, red to red (positive to
positive) and black to black (negative to negative).
2. Connect the battery connector to the battery adapter cable.
3. Press the Batt / PROG Stop button to access the root menu. Press the DEC or INC
button to scroll through the main menu screens until you reach Program Select=Pb BATT.
4. Press the ENTER / Start button.
5. Press the DEC or INC Button until Pb CHARGE appears.
6. Press the ENTER / Start Button to edit the parameter. The Parameter will
begin fl ashing.
7. Press the DEC or INC Button to change the value of the parameter. Press
the ENTER / Start Button again to move to the next parameter.
8. Once the parameters are at the desired settings, press and hold the ENTER
/ Start button for 3 seconds.
9. The charger will check the battery and charger settings and charging will begin.
10. Press the DEC or INC Button to see the rest of the charging information.
11. Press Batt / PROG Stop at any time to stop discharging.
12. When charging is complete, the charger will sound a series of beeps.
13. Disconnect the battery from the charger when the charge is complete.
BATT/PROGRAM
Pb BATT
Pb CHARGE
2.0A 12.0V (6P)
Pb DISCHARGE
1.0A 12.0V (6P)
CAUTION: Before charging, always ensure you have chosen the
correct battery chemistry type for the battery you are charging.