User Manual

15
SCAN TO GO
The Passport P4 can be automatically set with the SCAN TO GO feature by scanning
a compatible QR code. Check your battery for a compatible QR code. If you need to
add one, a QR code can be generated from within the Battery Memory section.
HOW TO GENERATE A QR CODE:
1. Add battery memory settings to match your battery.
2. Touch the QR code next to the battery memory, save it to the Gallery on your device.
3. Print the QR code and apply it to your battery.
Example settings shown, the app does not include any pre-
confi gured memory settings.
Battery
Type
HOME PROGRAM SYSTEM
LiPo
LiIo
LiFe
LiHV
NiMH
NiCD
1
2
3
4
5
6
BAL. CHARGE
CHARGE
DISCHARGE
STORAGE
SCAN TO GO
FAST CHARGE
Battery
Cells
Operation
Mode
NEXT
HOME PROGRAM SYSTEM
Input Power
320 W
Balance Port Connection
Balance Port Connection
Balance Port Connection
Change Password
Firmware Update
HOW TO USE A QR CODE:
1. Touch the SCAN TO GO button from the HOME screen in the Dynamite
Dashboard App.
2. The camera will open on your device, use this to scan the QR code.
3. When the QR code is scanned it will apply the parameters, press START to
begin charging.