User Manual

9
OPERATING YOUR CHARGER
POWER UP SCREEN
When the charger is powered ON, there is a series of self tests and
the charger will require the user to verify they have read the manual by
pressing the ENTER / Start button. The charger will not proceed with
charge functions until this process is completed.
NEVER LEAVE THE CHARGER UNATTENDTED WHILE IN OPERATION.
NEVER CHARGE ON OR AROUND COMBUSTIBLE MATERIALS.
Charging batteries can be dangerous
if proper precautions are not taken.
By Pressing the ENTER button you
are confirming that you understand
this and that you have read the
manual and understand the warnings
enclosed.
WARNING!
LI** (LI-PO/LI-FE/LI-ION) LITHIUM CHARGING
1. Connect the banana plugs of the battery adapter cable to the charge port.
Confi rm the positive and negative connectors match, red to red (positive to
positive) and black to black (negative to negative).
2. Connect the Balance Adapter Board to the Balance Port of the charge port.
3. Connect the battery connector to the battery adapter cable.
4. Connect the balance connector of the battery to the balance adapter.
5. Press the Batt / PROG Stop button to access the root menu. Press the DEC
or INC button to scroll through the main menu screens until you reach
Program Select=Li-Po/Li-Ion/Li-Fe.
6. Press ENTER / Start
7. Press the DEC or INC Button to scroll through the program options (Charge,
Balance Charge, Storage, Discharge). Select Charge.
8. Press ENTER / Start to select a program option. The Parameter will begin
fl ashing.
9. Press the DEC or INC Button to change the value of the parameter. Press
the ENTER / Start Button again to move to the next parameter.
10. Once the parameters are at the desired settings, press and hold the
ENTER / Start Button for 3 seconds. Press ENTER / Start again to confi rm
and start the charge process.
11. The charger will check the battery and charger settings and charging will
begin.
12. Press the DEC Button to see the rest of the Charging information. Press
the INC Button to see the voltages for each cell.
13. Press ENTER / Start to return to the charging screen.
14. Press the Batt / PROG Stop Button at any time to stop charging.
15. When charging is complete, the charger will sound a series of beeps.
16. Disconnect the battery from the charger when the charge is complete.
4.20 4.20 4.20
0.00 0.00 0.00
BATT/PROGRAM
Li** BATT
Li** CHARGE
2.0A 14.8V (4S)
CAUTION: Before charging or discharging, always ensure you have
chosen the correct battery chemistry type for the battery you are charging.