Manualshelf

User Manual

ManualsBrandsDynamite ManualsCars & TrucksPassport P4 AC/DC Four Port Multi-charger
11121314151617181920
13
PB DISCHARGING
PB CHARGING
1. Connect the banana plugs of the battery adapter cable to the charge port.
Confirm the positive and negative connectors match, red to red (positive to
positive) and black to black (negative to negative).
2. Connect the battery connector to the battery adapter cable.
3. Press the Batt / PROG Stop button to access the root menu. Press the
DEC or INC button to scroll through the main menu screens until you reach
Program Select=Pb BATT.
4. Press the ENTER / Start button.
5. Press the DEC or INC Button until Pb DISCHARGE appears.
6. Press the ENTER / Start Button to edit the parameter. The Parameter will
begin flashing.
7. Press the DEC or INC Button to change the value of the parameter. Press
the ENTER / Start Button again to move to the next parameter.
8. Once the parameters are at the desired settings, press and hold the ENTER /
Start button for 3 seconds.
9. The charger will check the battery and charger settings and discharging will
begin.
10. Press the DEC or INC Button to see the rest of the Discharging information.
11. Press Batt / PROG Stop at any time to stop discharging.
12. When discharging is complete, the charger will sound a series of beeps.
13. Disconnect the battery from the charger when the discharge is complete.
1. Connect the banana plugs of the battery adapter cable to the charge port.
Confirm the positive and negative connectors match, red to red (positive to
positive) and black to black (negative to negative).
2. Connect the battery connector to the battery adapter cable.
3. Press the Batt / PROG Stop button to access the root menu. Press the DEC or INC
button to scroll through the main menu screens until you reach Program Select=Pb BATT.
4. Press the ENTER / Start button.
5. Press the DEC or INC Button until Pb CHARGE appears.
6. Press the ENTER / Start Button to edit the parameter. The Parameter will
begin flashing.
7. Press the DEC or INC Button to change the value of the parameter. Press
the ENTER / Start Button again to move to the next parameter.
8. Once the parameters are at the desired settings, press and hold the ENTER
/ Start button for 3 seconds.
9. The charger will check the battery and charger settings and charging will begin.
10. Press the DEC or INC Button to see the rest of the charging information.
11. Press Batt / PROG Stop at any time to stop discharging.
12. When charging is complete, the charger will sound a series of beeps.
13. Disconnect the battery from the charger when the charge is complete.
BATT/PROGRAM
Li** BATT
Li** CHARGE
2.0A 14.8V (4S)
2.0A 14.8V (4S)
BATT/PROGRAM
Ni** BATT
Ni** CHARGE
CURRENT 2.0A
Ni** Auto CHARGE
CURRENT 3.0A
Ni** DISCHARGE
1.0A CUT: 3.2V
Li** FAST CHG
2.0A 14.8V (4S)
Li** BALANCE CHG
2.0A 14.8V (4S)
Li** STORAGE
2.0A 14.8V (4S)
Li** DISCHARGE
1.0A 14.8V (4S)
Ni** RE-PEAK
1
Ni** CYCLE
CHG>DCHG 1
BATT/PROGRAM
SYSTEM SETTING->
Safety Timer
ON 120Min
DC SUPPLY: OFF
CH1:50W CH2:50W
Capacity Cut-Off
ON 5000mAh
Temp Cut-Off
On 50C 122F
Temperature Unit
Celcius
Rest Time
CHG>DCHG 10Min
NiMH Sensitivity
D.Peak 4mV
Key Beep ON
Buzzer ON
Key Beep ON
Voice ON
Bal. Connection
ON
Load Factory Set
Enter
Version
HW:1.00 SW:1.03
Pb CHARGE
2.0A 12.0V (6P)
Pb DISCHARGE
1.0A 12.0V (6P)
BATT/PROGRAM
Pb BATT
0.00 0.00 0.00 V
0.00 V
MAIN: 0.00V
H:0.00 L:0.00V
BATT/PROGRAM
BATT METER
BATTERY CHECK
...................
0.00 0.00 0.00
0.00 0.00 0.00
BATT/PROGRAM
BATT RESISTANCE
NiCd Sensitivity
D.Peak 4mV
BATT/PROGRAM
BATT MEMORY
DC INPUT LOW
10.0V
AC MAX POWER
100W
VERSION
HW: FW:
[ BATT MEMORY X ]
ENTER SET-> LiPo
BATT TYPE
BATT VOLTAGE
14.8V(4S)
CHARGE CURRENT
2.0A
DISCHRG CURRENT
1.0A
DISCHG VOLTAGE
3.0V/CELL
4.20V
TVC=YOUR RISK!
SAVE PROGRAM
ENTER
BATT/PROGRAM
Li** BATT
Li** CHARGE
2.0A 14.8V (4S)
2.0A 14.8V (4S)
BATT/PROGRAM
Ni** BATT
Ni** CHARGE
CURRENT 2.0A
Ni** Auto CHARGE
CURRENT 3.0A
Ni** DISCHARGE
1.0A CUT: 3.2V
Li** FAST CHG
2.0A 14.8V (4S)
Li** BALANCE CHG
2.0A 14.8V (4S)
Li** STORAGE
2.0A 14.8V (4S)
Li** DISCHARGE
1.0A 14.8V (4S)
Ni** RE-PEAK
1
Ni** CYCLE
CHG>DCHG 1
BATT/PROGRAM
SYSTEM SETTING->
Safety Timer
ON 120Min
DC SUPPLY: OFF
CH1:50W CH2:50W
Capacity Cut-Off
ON 5000mAh
Temp Cut-Off
On 50C 122F
Temperature Unit
Celcius
Rest Time
CHG>DCHG 10Min
NiMH Sensitivity
D.Peak 4mV
Key Beep ON
Buzzer ON
Key Beep ON
Voice ON
Bal. Connection
ON
Load Factory Set
Enter
Version
HW:1.00 SW:1.03
Pb CHARGE
2.0A 12.0V (6P)
Pb DISCHARGE
1.0A 12.0V (6P)
BATT/PROGRAM
Pb BATT
0.00 0.00 0.00 V
0.00 V
MAIN: 0.00V
H:0.00 L:0.00V
BATT/PROGRAM
BATT METER
BATTERY CHECK
...................
0.00 0.00 0.00
0.00 0.00 0.00
BATT/PROGRAM
BATT RESISTANCE
NiCd Sensitivity
D.Peak 4mV
BATT/PROGRAM
BATT MEMORY
DC INPUT LOW
10.0V
AC MAX POWER
100W
VERSION
HW: FW:
[ BATT MEMORY X ]
ENTER SET-> LiPo
BATT TYPE
BATT VOLTAGE
14.8V(4S)
CHARGE CURRENT
2.0A
DISCHRG CURRENT
1.0A
DISCHG VOLTAGE
3.0V/CELL
4.20V
TVC=YOUR RISK!
SAVE PROGRAM
ENTER
BATT/PROGRAM
Li** BATT
Li** CHARGE
2.0A 14.8V (4S)
2.0A 14.8V (4S)
BATT/PROGRAM
Ni** BATT
Ni** CHARGE
CURRENT 2.0A
Ni** Auto CHARGE
CURRENT 3.0A
Ni** DISCHARGE
1.0A CUT: 3.2V
Li** FAST CHG
2.0A 14.8V (4S)
Li** BALANCE CHG
2.0A 14.8V (4S)
Li** STORAGE
2.0A 14.8V (4S)
Li** DISCHARGE
1.0A 14.8V (4S)
Ni** RE-PEAK
1
Ni** CYCLE
CHG>DCHG 1
BATT/PROGRAM
SYSTEM SETTING->
Safety Timer
ON 120Min
DC SUPPLY: OFF
CH1:50W CH2:50W
Capacity Cut-Off
ON 5000mAh
Temp Cut-Off
On 50C 122F
Temperature Unit
Celcius
Rest Time
CHG>DCHG 10Min
NiMH Sensitivity
D.Peak 4mV
Key Beep ON
Buzzer ON
Key Beep ON
Voice ON
Bal. Connection
ON
Load Factory Set
Enter
Version
HW:1.00 SW:1.03
Pb CHARGE
2.0A 12.0V (6P)
Pb DISCHARGE
1.0A 12.0V (6P)
BATT/PROGRAM
Pb BATT
0.00 0.00 0.00 V
0.00 V
MAIN: 0.00V
H:0.00 L:0.00V
BATT/PROGRAM
BATT METER
BATTERY CHECK
...................
0.00 0.00 0.00
0.00 0.00 0.00
BATT/PROGRAM
BATT RESISTANCE
NiCd Sensitivity
D.Peak 4mV
BATT/PROGRAM
BATT MEMORY
DC INPUT LOW
10.0V
AC MAX POWER
100W
VERSION
HW: FW:
[ BATT MEMORY X ]
ENTER SET-> LiPo
BATT TYPE
BATT VOLTAGE
14.8V(4S)
CHARGE CURRENT
2.0A
DISCHRG CURRENT
1.0A
DISCHG VOLTAGE
3.0V/CELL
4.20V
TVC=YOUR RISK!
SAVE PROGRAM
ENTER
CAUTION: Before charging, always ensure you have chosen the
correct battery chemistry type for the battery you are charging.
WARNING: Explosive gases. Prevent flames and sparks. Provide
adequate ventalation during charging.
CAUTION:
For Pb (lead acid) batteries, Always connect/disconnect the
battery before powering ON the charger, or damage to the charger and the
battery can result.