DYNAMIX IP PHONE 510.
DYNAMIX IP PHONE 510. User manual I、 DYNAMIX IP PHONE 510 Feature ...............................................................4 1. 2. 3. 4. 5. 6. 7. II、 Appearance........................................................................................................................4 Interfaces...........................................................................................................................4 Electricity characteristic...........................................................
DYNAMIX IP PHONE 510. User manual System Manage .......................................................................................................................23 III、 1. 2. 4.9、 Account Manage................................................................................. 23 4.10、 Phone Book ........................................................................................ 24 4.11、 Syslog config ......................................................................................
DYNAMIX IP PHONE 510. User manual I、 DYNAMIX IP PHONE 510 Feature 1. Appearance 2. Interfaces 9 Power: 9 WAN: 9 LAN: Output Power:12VDC,800mA. RJ45 port. RJ45 port.
DYNAMIX IP PHONE 510. User manual 3. Electricity characteristic 9 Speciality of electric: 9 The network connects: output 12V 500mA DC 2 RJ45 connect, a WAN, a LAN 4. Software 9 Sip 2.0 (RFC3261) 9 IAX2 9 STUN 9 Jitter Buffer (200ms) VAD, CNC 9 G7.11 a/u , G729 codec. 9 DHCP client and server.
DYNAMIX IP PHONE 510. User manual 5. Operating requirement 9 Operation temperature: 0 to 40° C (32° to 104° F) 9 Storage temperature: -30° to 65° C (-22° to 149° F) 9 Humidity: 10 to 90% no dew 9 Package 9 Size:338×220×85mm 6. Packing List 9 DYNAMIX IP PHONE 510 9 Power adaptor (out put 12v ,500mA) 9 Manual CD 7. Installation Use ethernet cable to connect DYNAMIX IP PHONE 510’s LAN port and your computer. Set your computer’s ip to the network 192.168.10.x or using dynamic obtain IP.
DYNAMIX IP PHONE 510. User manual II、 Web Configuration 1. Access Web setting page Enter DYNAMIX IP PHONE 510 IP address in the web browser and press ENTER to go to the log on page, and key in the username and password to access DYNAMIX IP PHONE 510 setting page. Default username and password is: Administrator: Username: admin password: admin User: Username: guest Username: guest This page shows the IP phone woking status. The network part shows the connection status of WAN and LAN .
DYNAMIX IP PHONE 510. User manual Parameters: 9 Active IP: IP phone’s address 9 Current Netmask:network netmask 9 MAC Address:MAC of IP phone 9 Current Gateway : the IP address of the router B、If your ISP provide you with the fixed IP address, please choose static and fill in the correct information of IP Address、 Netmask、Gateway、Primary DNS etc. If you do not know it please refer to your ISP provider or network management stuff.
DYNAMIX IP PHONE 510.
DYNAMIX IP PHONE 510. User manual 2.2、 LAN Config Parameter: 9 LAN IP:config LAN static IP 9 9 9 9 Netmask: LAN netmask DHCP Service: enable LAN DHCP Server , need to reboot to make it available. NAT: Network Address Traslation Bridge Mode: make the IP phone into switch mode , press Apply the IP phone will reboot 3. VoIP 3.
DYNAMIX IP PHONE 510. User manual 9 9 Unregistered Server Address: SIP server address , support both IP address and domain name Server Port: SIP server port , default is 5060 9 Account Name:SIP account name 9 Phone Number:SIP account phone number, if leave it as blank , no registration information will be sent out 9 Display Name:show the display name that you want to display on the phone of callee.
DYNAMIX IP PHONE 510. User manual 9 9 9 from the SIP server. NAT Keep Alive Interval: Co-work with the Auto Detect Server, if Auto Detect Server is enable, DYNAMIX IP PHONE 510 will periodically detect if the SIP server is available according this setting.
DYNAMIX IP PHONE 510.
DYNAMIX IP PHONE 510. User manual 9 9 9 9 9 Echo test text: echo test number in text format Refresh time: IAX refresh time Enable Register: enable or disable register IAX(Default Protocol): Set IAX 2 as the default protocol to initial the call ( not answering) , if not the system will choose SIP as default. But you can still use SIP by config the prefix in dial plan Enable G.729: Using G.729 speech coding mandatory consultations 4. Advance 4.
DYNAMIX IP PHONE 510. User manual 4.2、 Digit map Digit map is a set of rules to determine when the user has finished dialing. DYNAMIX IP PHONE 510 support below digital map: 9 End With “#”: Use # as the end of dialing. 9 Fixed Length: The call will be sent out automatically when the length of the number you dial reach the fixed one. For example if you set number of 11 here , when you dial 11 digits the call will be sent out immediately. 9 Timeout: Specify the timeout of the last dial digit.
DYNAMIX IP PHONE 510. User manual 4.3、 Call Service User configure the value add service such as hotline, call forward, call transfer, 3-way conference call .etc in this page 9 Hotline: configure hotline number. DYNAMIX IP PHONE 510 immediately dials this number after hook-off if it is set and the user can not dial any other number 9 No Answer Time: no answer call forward time setting.
DYNAMIX IP PHONE 510. User manual ¾ Any digital call with a certain head number , For example 6. means any incoming number with the 6 as the first number will be refused 9 Limit List: outgoing calls with these phone numbers will be refused ¾ You add a certain number in it , when the number you dial contain this number , it will be refused ¾ Use x to represent any number.
DYNAMIX IP PHONE 510. User manual 9 Handfree Volume:handfree speaker output volume 9 Ring Volume:ring tone volume 9 G729 Payload Length:config G729 Payload length 4.
DYNAMIX IP PHONE 510.
DYNAMIX IP PHONE 510. User manual Config Manage 9 9 9 Save Config: save current settings. If not save , any change on setting will lost after rebooting Backup Config: Backup the config file, via point the right key of mouse-Æ save target as….-Æwill pop a save window, then type the config file name in the File name(the file type is text file) Clear Config: restore to default settings.
DYNAMIX IP PHONE 510. User manual 4.7、 TFTP/FTP Update: upload/download the configure file with FTP or TFTP server. or download firmware from FTP or TFTP server Back up configure file to your FTP/TFTP server. 9 9 9 9 Server: FTP/TFTP server address . It can be the format of IP address such as 192.168.1.1 or domain such as ftp.domain.com Meanwhile , it support sub directory such as 192.168.1.1/ftp/config/ or ftp.domain.
DYNAMIX IP PHONE 510. User manual 4.8、 Auto Provisioning 9 Current Version: the system will display the current version number 。 9 9 9 9 Server Address: FTP/TFTP server address Username: FTP server user name Password: FTP server password Config File Name: The name of configuration file.
DYNAMIX IP PHONE 510. User manual System Manage 4.
DYNAMIX IP PHONE 510. User manual 4.10、 Phone Book 9 9 Phonebook Table: shows phonebook detailed information Add Phone Book: add a new record in phonebook 9 Name: nick name of a number ,when the call of this number comes in the LCD will show 9 9 the name Number: phone number Ring Type: ring tone If you want to make change on existing account , select the account an click 【Modify】or 【Delete】.
DYNAMIX IP PHONE 510.
DYNAMIX IP PHONE 510. User manual 4.12、 Time Set 9 9 9 9 9 9 Server:type the ip address of time server Timezone:select correct time zone in list box Timeout: longest response time for SNTP Manual Timeset:The time setting Select SNTP: choose SNTP server Daylight:Daylight saving time 4.13、 Reboot Reboot IP phone, some setting needs to reboot to make it works. Please always save config before reboot, otherwise the setting will return to previous setting.
DYNAMIX IP PHONE 510. User manual III、 Use keypad configure DYNAMIX IP PHONE 510 1. Keypad function User can configure DYNAMIX IP PHONE 510 through its keypad.
DYNAMIX IP PHONE 510. User manual XPER Calling mode Transfer, detail refer Redial Calling mode Redial key Voicemail Calling mode call key Status Idle mode Speed dial key 2. Keypad Menu User may use SET, Menu/ok, Exit, Vol+, Vol- to config DYNAMIX IP PHONE 510 detail setting. Press Menu/ok to enter config mode, and the default password is 123.
DYNAMIX IP PHONE 510. User manual SIP Server Regist SIP Number Password Account Input-volume DSP Output-Volume System 1. Save 2. Reboot 3. Set Default IV、 POST Mode DYNAMIX IP PHONE 510 provide safe mode. When there is booting problem because of setting problem or firmware problem. User can restore the factory setting or upgrade to a new firmware to solve this problem.
DYNAMIX IP PHONE 510. User manual within the first 5 seconds, then the phone will go to POST mode. It has a default ip 192.168.10.1 in POST mode. User may change the PC’s IP address to 192.168.10.xx and telnet to 192.168.10.1 to access the IP phone in POST mode. User can accord the guide in post mode to clear the settings or upgrade the firmware V、 FAQ 1. Why the settings vanish after reboot? Please go to Config ManageÆSave Config to save your setting always. 2.
DYNAMIX IP PHONE 510. User manual 8610 xxxxxxxx. 9 Suffix (optional):Configure suffix, show no suffix if not set Instance: 9 9 9 9 9 2T rule: If the call starts with 2, the first 2 will be deleted, and the rest number will be sent to private SIP server. 3T rule: If the call starts with 3, the first 3 will be deleted, and the rest number with be sent to public SIP server. 123 rule: Dial 123 and will send 8675583018049 to your server. Used as speed dial function.
DYNAMIX IP PHONE 510. User manual 9 9 Call transfer: Enable Call Transfer Unattended transfer: If A is using AT510 talking with B , B want to speak to C. A just press XFER and dial C’s number Attended transfer: 9 Only SIP support attended Transfer. If A is using DYNAMIX IP PHONE 510 talking with B , B want to speak to C. A just press Hold and dial C’s number to ask whether he can answer the call from B.