Datasheet

NC1000TX-G

10/100/1000Mbps Gigabit Ethernet PCI Bus Adapter

FEATURES

Support IEEE 802.3, 802.3u, and 802.3ab standards

IEEE 802.3x Full-Duplex Flow Control support.

IEEE 802.1p Layer 2 priority queuing support.

IEEE 802.1q Virtual LAN (VLAN) Tag and Jumbo Frame support.

PCI v2.2 32 bit, 33/66 MHz Bus compliant.

Auto-Negotiation support for Auto-Detect 10/100/1000Mbps data rate and Full/Half-

Duplex operation mode.

Automatic crossover support for crossover or regular cable.

Wake-on-LAN and remote Wake-up support.

INTRODUCTION

The new NC1000TX-G Adapter is an exciting new 10/100/1000Mbps high speed Gigabit

Ethernet Adapter. This model is equipped with an Auto-Negotiation function that

automatically supports data transmission bandwidths ranging from 10Mbps - 2000Mbps.

This function smoothly and automatically switches drivers between 1000Mbps, 100Mbps

and 10Mbps, Full or Half-Duplex, LAN connections. The Adapter runs in 32-bit bus

master mode. The NC1000TX-G comes with drivers for all major operating systems.

PAGE 1
NC1000TX-G 10/100/1000Mbps Gigabit Ethernet PCI Bus Adapter INTRODUCTION The new NC1000TX-G Adapter is an exciting new 10/100/1000Mbps high speed Gigabit Ethernet Adapter. This model is equipped with an Auto-Negotiation function that automatically supports data transmission bandwidths ranging from 10Mbps - 2000Mbps. This function smoothly and automatically switches drivers between 1000Mbps, 100Mbps and 10Mbps, Full or Half-Duplex, LAN connections. The Adapter runs in 32-bit bus master mode.
PAGE 2
PRODUCT SPECIFICATION Fiber Mode Single-Mode Standards 1000BASE-T: IEEE 802.3ab 100BASE-TX: IEEE 802.3u 10BASE-T: IEEE 802.3 Bus Type PCI-Bus specification revision 2.