Owner manual

TCE 400 H48 2X
HD Edge Carry Transfer – 48”L - 2 Zone
People and Products You Can Rely On
Module: TCE-400 H48 2X HD Edge Carry Transfer Conveyor
Length: 48” (1219mm) edge carry rail design
Frame Style:
Precision welded framing with painted panels
Description:
Heavy-duty, 2-zone conveyor used to buffer or transfer up to two products, one in
each zone. Audit/bypass capability in second zone. Selection of “Single Mode”
allows conveyor to act as a one zone.
Standard Features:

Heavy-duty rails and motors for reliable transfer of large/heavy product.
 Mode selector switch for single or dual transfer operation
 Single mode operation transfers product up to 42” (1066mm)
 Programmable Logic Controller
 Variable speed (10-40 fpm) (3 – 12 mpm)
 Hand crank for width adjust at both front and rear of machine
 Operator controls (E-Stop, Reset, Release, Audit/Bypass)
 “Look-up” product sensors
 Audible alarm
 Left to right travel, front fixed rail
 ESD grounding receptacles
 Painted sheet metal panels, “Dynapace White”
 Conforms to SMEMA Spec. 1.2 and NFPA 79
 Includes 1 standard communications cable
Product Handling Capability:
Edge Contact:
0.125” (3mm)
Length:
3” – 42” (76 – 1067mm)
Width:
5” – 24” (127 – 609mm)
Thickness:
0.060” (1.524mm) minimum
Weight:
Up to 75 lbs (34 kg)
Above board clearance:
N/A
Below board clearance:
1.0” (51mm)
Facilities Requirements:
Electrical:
115 VAC/15 amp
Air:
N/A
Line height:
37” +/- 2” (940mm +/- 51mm)
with 6” above floor clearance for utility track
PO Box 7 Palatine, IL 60078 • 847-398-5757 • Sales Fax [phone]
•
www.dynapace.com
C17185 082005