Manual

OXF 118
Adjustable Oven Exit Conveyor
People and Products You Can Rely On
Module: OXF-118 (18”W) Flat Belt Oven Exit Conveyor C17630
Frame Style:
Combination precision welded steel framing and extruded metal
Description:
The oven exit conveyor is designed to accept product exiting an oven on the mesh belt
or at a different height & position on the fingers. The OXF 118 adjusts for the correct
spacing for either chain or fingers. The flat belt design offers support to the full product.
Standard Features:
 PLC control with indexing & belt full logic
 Look down & look across sensors
 EDS safe / high temperature belt utilized
 Variable speed (1 - 12 fpm) (.30 – 3.66 mpm) others available
 Stainless Steel Bed, Belt design offers support of full product
 5/8th inch nose bar in the in feed
 Operator controls (E-stop, Reset)
 Left to right travel
 Designed for longevity with minimal maintenance
 Manual Position, height & in/out, adjustment standard
 Power Position, with memory, adjustment optional
 Painted sheet metal panels, “Dynapace White”
 Conforms to SMEMA Spec. 1.2 and NFPA 79
 Includes 1 standard communication cable
Product Handling Capability:
Edge Contact:
N/A
Length:
3” – 20” (76 – 508mm)
Width:
2” – 16” (51 – 406mm)
Thickness:
N/A
Weight:
9 lbs. (4.08kg) per foot
Available Options
 Custom Lengths & Widths
 Steel Frame
 Multiple Drive Sections
 Power height & in/out position
ts
 Custom Colors
 Light Tower & Audible Alarm
 Cooling Hoods
ithout PLC  Continuous run w
 Built in Storage & Tool Cabine
Facilities Requirements:
Electrical:
115 VAC/60Hz 15 amp
Air:
N/A
Footprint: Approx.29”W by 48”L
737mm W by 1219mm L
PO Box 7 Palatine, IL 60078 • 847-398-5757 • Sales Fax [phone]
•
www.dynapace.com
082005