Owner manual

SLE 300
Single or Double Sided Slide Line
People and Products You Can Rely On
Module: SLE 300 Single or Double Sided Manual Slide Line
Frame Style:
Welded steel framework
Description:
The SLE 300 single or double-sided slide line is manual push for assembly of printed
circuit boards. Custom lengths available.
S tandard Features:
• Slide line - Edge carry – Top slide & Bottom slide “brass strip”
• Welded tubular steel construction
• Overhead lights
• Steel footrests
• Front fixed rail
• Grounding receptacles (1 per operator)
• Rails set at 15 degree ergonomic angle, other angles available
• Master power & overhead light - on/off switch
• Precision slide quick width adjustment (Kip handle type)
SLE-300 D60 5ft double sided slide line with
optional RA-236 parts bin mounts shown
O ptions: (must be specified at the time of order)
 Single or Double Sided
 Custom lengths
 Parts bin mounting
 Document Holders
 PC monitor mounting
 Work surfaces
 Power takeaway
Product Handling Capability:
Edge Contact:
0.232” (5.89mm)
Length:
3” – 42” (76 –1067mm)
Width:
3.5” – 18” (89 – 457mm)
Above board clearance:
NA
Below board clearance:
1” (25.4mm)
Facilities Requirements:
Electrical:
115 VAC/15 amp
Air:
N/A
Line height:
TBD
PO Box 7 Palatine, IL 60078 • 847-398-5757 • Sales Fax [phone]
•
www.dynapace.com
C17184 082005