User guide

TTE 300
Slide and Turn Unit - 90 degree
People and Products You Can Rely On
Module: TTE-300 90 Degree Turn Unit
Frame Style:
Precision welded steel framing with painted panels
Description:
The slide and turn conveyor module is designed to accept a PCB and route as a
“pass through”, or “rotate and off-load” at 90 degrees.
Standard Features:
 Programmable Logic Controller
 Shuttle and turn operation
 Variable speed (10-45 fpm) (3 – 13.7mpm) Other available
 Precision slide, quick width adjustment
 Operator controls (E-stop, Reset, ALT (0°, 90°)
 90 degree, right turn capable
 Interlocked safety cover
 Left to right travel, front fixed rail
 Audible alarm
 ESD grounding receptacle
 Painted sheet metal panels, “Dynapace White”
 Conforms to SMEMA Spec. 1.2 and NFPA 79
 Includes 1 standard communication cable
Product Handling Capability:
Edge Contact:
0.187” (5mm) Others Available
Length:
5” – 18” (127 – 457mm)
Width:
3” – 18” (76 – 457mm)
Thickness:
0.031” minimum
Weight:
Up to 5 lbs (2.7kg) per foot
Above board clearance:
1” (25.4mm)
Below board clearance:
0.5” (13mm)
Facilities Requirements:
Electrical:
115 VAC/60 Hz 15 amp
Air:
N/A
Line height:
37” +/- 2” (940mm +/- 51mm)
with 6” above floor clearance for utility track
Footprint:
30”L x 30”W (762 L x 762mm W)
PO Box 7 Palatine, IL 60078 • 847-398-5757 • Sales Fax [phone]
•
www.dynapace.com
C17168 082005